Movable Crosshair Target On Chart
May 20, 2008
I have an xy scatter plot and I'd like a way to put some verticle lines / cursors on the plot. These lines could be moved along the x axis (right and left). Where these lines cross the curve, i'd like the x and y value of the data point on the curve to be given in cells within the spreadsheet.
If this is not possible, is there a way to get the values of the data points in the curve by selecting them. I know you can hover over the data point and it comes up in box, but i'd like those values to be actualy transfered into the spreadsheet.
The location of the data point will vary, so the system needs to be dynamic, i.e, I need to be able to select the datapoint then extract the x and y value.
View 6 Replies
ADVERTISEMENT
May 29, 2005
This is a simple fine line crosshair which ALWAYS extends the full screen width and height. Excel users seem to be stuck with the little box cross. A full screen crosshair for Excel would allow one to instantly and easily see which row and column the cursor is on without clicking a cell or following from the cursor to the row/column with your finger on the screen. It may seem trivial, but once you have used a full screen crosshair, you just don't know what you've been missing.
View 9 Replies
View Related
May 5, 2006
I have a data base in a worksheet which is genateated automatically with formula's, I want the a row after the last to be a SUM that moves up or down depending of the amount of the rows.
View 9 Replies
View Related
Feb 20, 2014
I want to do a pivot table with a range a1:j(variable)
The variable row number is held in M2
I would like to do a pivot with range
'Data Input Used for Pivots'!$A$1:$J$[m2]
View 1 Replies
View Related
Sep 1, 2007
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
View 2 Replies
View Related
Sep 24, 2009
I have this list wherein the rows might extend beyound 100.
At AG23&24 i have some comments
Can i somehow implement such that even when i scroll down teh rows this too will be appearing, as we see sometimes navigation toolbars appearing in websites when we go down or move up.
I want to know if this feature can be implemented in excel.
View 11 Replies
View Related
Sep 27, 2008
I have a userform that allows users to review, input and edit data on a spreadsheet. (thanks to Leith for getting me started on it a while back)
I want to be able to assign names to columns so that they can be rearanged in the worksheet without interfering with the VBA/macro/userform.
For instance currently the VBA for the row = "R" (equating it to whichever row the form is currently on)
View 11 Replies
View Related
Dec 3, 2012
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
View 2 Replies
View Related
Jun 4, 2008
I am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.
View 2 Replies
View Related
Jul 12, 2013
How do I paste the first chart into the second chart but maintain the format of the second chart?
View 2 Replies
View Related
Aug 22, 2014
I want to create a chart that shows "Gap to Target. See attached Sample spreadsheet for more info.
Note how the yellow part of the chart is formulaic...is actually the chart...and the green bar over it is manually pasted. That green bar is supposed to be "result" and that yellow gap is supposed to represent the difference between Targeted sales and the actual Result.
How to actually build the green part into the chart? Every time I try, it just adds them together and doesn't show the gap.
Example.xlsx‎
View 4 Replies
View Related
Jan 30, 2014
Is it possible to add a value to a target cell without VBA Ie I have 3 worksheets and I would like to pull a varying cell value from each sheet to give me cumulative total on another sheet in a single cell.
View 2 Replies
View Related
Mar 25, 2014
I have a simple sub below (CopyData) to copy a cell value (I2) to next unused row in column O. If I run the sub from the VB editor, it runs fine doing exactly what I intend to do.
I've tried several macros to cause this sub to run when the value of cell I2 changes but they all behave the same way. I am initiating worksheet changes using the F9 function key. I2 changes every time I press F9 but the CopyData sub doesn't run.
Below is the latest attempt:
Code:
Sub CopyData()
Range("I2").Copy
Sheets("Calculations").Range("O" & Rows.Count).End(xlUp).Offset(1, 0).PasteSpecial xlPasteValues
End Sub
Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$I$2" Then
Call CopyStuff
End If
End Sub
View 2 Replies
View Related
Jan 29, 2008
Im tring to run the procedure called KeyEventsOn ONLY when a single cell in range E29:E30 changes.
The Intersect and Target are borrowed from a book , I dont fully understand how these work. I am assuming that 'Target' should simply reflect the currently selected range, and the 'intersect' function runs a check as to whether the target is in the range to be checked.
The problem Im having is the variable 'Target'. If the above is true, why for example when I type 'ABC' into the current selected cell does the variable 'Target' show as "ABC" and not "$E$29" (or whatever cell is selected)...
View 9 Replies
View Related
Mar 21, 2008
what the Taget.Address relates to in VBA. I cant figure it out, how can this be used?
View 9 Replies
View Related
Apr 30, 2007
in selection change event how to identify formula in target?
View 9 Replies
View Related
Feb 3, 2014
what i need to do to track daily sales with 10% growth from previous year total sales.
I have 12 separate sheets for each month.
On each sheet i have separate columns"date" "goal" "actual" "% from goal".
What function/formula is needed to calculate the daily target goal taking into account that weekends are busier
View 1 Replies
View Related
Dec 24, 2012
I'm working on a spreadsheet to measure performance.
Target is 10% and below
If actual is below or equal to 10%, then 100% achievement
If actual is above 10%, From 11% to 20%, then achievement is 90% and so on down until 0%
If actual is beyond 20%, then achievement should not exceed 0%
View 5 Replies
View Related
Apr 14, 2014
I am trying use target Bval in a sheet. Can I give conditions like if only the value is number then trigger the code else no. Is there a possibility???
View 6 Replies
View Related
Dec 17, 2007
Basically, I'm trying to do this:
View 11 Replies
View Related
Jan 20, 2009
How would I set up a series of CASES depending on the Target.Value (a doubleclick code within spreadsheet) such that IF target value isblank, then change to Ö. If target value is Ö, then change to "NA". If target value is "NA" then clear contents
Would CASE be the best way to go or a series of IF's?
View 3 Replies
View Related
Nov 3, 2008
I am building a sheet of sales targets for 2009. With each month allocated a certain percentage of the annual target.
I wish to be able to take into account a change of target at some point in the year.
If i were to change the annual target in June, i need the spreadsheet to only change the monthly targets from June onwards, January - May are finished.
In the example attached there is a change in annual target in June. How do i calculate what the remaining month's targets need to be in order to meet the annual target while taking into account what has already been achieved and the shape of the budget as indicated by the percentages??
View 5 Replies
View Related
Apr 20, 2010
I have a row of data that holds dispatch values by week. I have a second row of data that holds stock levels by week. I simply want to create a third row that tells me how many weeks of demand a stock level will cover.
The data looks like this (comma deliminated):
Week, 1, 2, 3, 4, 5, 6, 7, 8, 9
Stock, 26490, 24490, 22490, 20490, 18490, 14239, 17898, 13646, 9393
Dispatch, 2000, 2000, 2000, 2000, 4251, 4251, 4252, 4253, 2350
In this example week 1 would have 9 weeks of stock cover, week 2 - 8 weeks and week 3 - 7 weeks of cover.
This is calculated by summing along the dispatch row until the cumulative sum of dispatch exceeds the current week stock level; then counting the number of weeks in the sum that cumulatively are less than (but closest to without being over) the total stock of that week.
Currently we manually create a massive array that sums along up to 26 weeks in advance and then have a manual formula that finds the maximum value below the target. This then outputs the column reference and then calculates the number of weeks based on the difference between the week column and the column highlighted.
View 8 Replies
View Related
Oct 21, 2011
How can I target just a "date" in any format?
=IF(A2>"any date",A2,B2)
View 7 Replies
View Related
Nov 18, 2011
I've been trying to configure my formula in Worksheet_Change to only run when targeted cells are being changed (by using Target). I don't get it to work properly.
A cell value is supposed to change in column AK when the equivalent cell in column H is changed. se my formula below.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = "H" Then
Dim LastRow As Long
[Code].....
Anyone used to work with Worksheet_Change Target who can see how I use Target wrong?
View 9 Replies
View Related
Dec 10, 2011
I need to be able to get the color of my target cell (the target could be in red green or blue - background or foreground color could be used) - I realize this requires the use VBA, which I know nothing about - I want to find the color NOT change it or manipulate it in any way
View 9 Replies
View Related
Jan 6, 2012
I am trying to set up a budget spreadsheet for a friend. The sheet will have the usual incoming and outgoings with a surplus at the end of each month. This surplus needs to be accumulated each month in a particular Account (Cell).
Once the amount in this cell reaches £5000 any surplus accumulated each month from that point needs to be deposited in another account (Cell).
View 2 Replies
View Related
Apr 24, 2012
I'm trying to sort values in order by how close they are to a target, whether they are above or below the target.
Example:
Target = 24
17
22
25
16
30
Result:
25
22
30
17
16
View 2 Replies
View Related
Mar 29, 2013
I am trying to have the exact same type of text (font, color, boldness, italicizing, underlining, etc) in my target as I have in my source on a character by character basis. The procedure below works for color only. Is there a way I can modify this procedure to include all cell attributes for each character in my target? I looked at the Font properties and couldn't find what I needed. Maybe I need to do it in a totally different way?
For Each cell In source
With cell
target.Characters(i, Len(.Value2)).Font.Color = .Font.Color
i = i + Len(.Value2) + Len(delim)
End With
View 9 Replies
View Related
Aug 29, 2007
The only problem is that once cell $A$1 changes to either Billable Impressions or CPM's to trigger the events the code keeps looping or formulating and won't stop... once I end the procedure if I hit enter in any cell it starts again and same problem persists...
way I can adjust this code to stop it from continuously calculating? ...
View 9 Replies
View Related
