ByVal Target As Range

Aug 29, 2007

The only problem is that once cell $A$1 changes to either Billable Impressions or CPM's to trigger the events the code keeps looping or formulating and won't stop... once I end the procedure if I hit enter in any cell it starts again and same problem persists...

way I can adjust this code to stop it from continuously calculating? ...

View 9 Replies


ADVERTISEMENT

ByVal Target As Range Code

Jan 16, 2008

This piece of code copies cell info from column A into cell B1 only when cursor 'scrolls' on Col. A

How can i modify the code so that it copies into cell B1 when cursor scrolls up/down regardless of col.?


Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Selection.Cells.Count = 1 Then
If Target.Column = 1 And Target.Value "" Then
Range("b1").Value = Target.Value
End If
End If
End Sub

View 9 Replies View Related

Worksheet_Change(ByVal Target As Range)

May 15, 2009

when I use worksheet_change for something so simple to do, it prevents me from deleting cells.

When I try to delete the cell values from A2 (5) and A3 (6), they won't delete unless I delete the value on A1 (True).

Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Range("A1").Value = "True" Then
Range("A2").Value = 5
Range("A3").Value = 6
Else
End If
Application.EnableEvents = True
Exit Sub
End Sub

View 9 Replies View Related

Match Description Which Might Be Because Of ByVal Target As Range

Oct 22, 2008

I get and error which says Procedure declaration does not match description which might be because of ByVal Target As Range if this can not be used than what can be the exact solution for this as i have to get the Target address

Private Sub Workbook_SheetCalculate(ByVal Sh As Object, ByVal Target As Range)
Dim sht As Worksheet
Dim shtChild As Worksheet
Dim lngRow As Long
Dim intCol As Integer
Dim strValue As String
Dim Target As Range
Dim rng As Range
Application.ScreenUpdating = True
Application.StatusBar = False
Set sht = Sh............

View 9 Replies View Related

Worksheet Change Event :: (ByVal Target As Range) Event In Module After Creating A Sheet

Mar 27, 2009

Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?

View 9 Replies View Related

Command For Target: Send A Target Link To A File

Sep 1, 2007

i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.

View 2 Replies View Related

Pass Array Byval

Nov 19, 2007

Is it possible to pass a typed array byval into a sub of function?

i.e.

Sub test()

Dim arr() As Integer

Call testfunc(arr)

End Sub

Function testfunc(ByVal arr As Integer)

End Function

View 9 Replies View Related

Target With Range Shorthand

Dec 17, 2007

Basically, I'm trying to do this:

View 11 Replies View Related

Ref Target Range Column To Sum

Sep 21, 2006

look at the attached workbook for an example of what i am trying to acheive and if possible modify or add another macro

in d7 i need a formula that equates to =C7-J7 where the column 'J' is known only by the 'TargetRange'.

Formula = "=c7-" & ccc & "7"

but what is required to reference the 'ccc' (TargetRange) column?

View 9 Replies View Related

Select Range In Target.address

Feb 10, 2010

I have this simple requirement

Business ProcessBp1Bp2Bp3Bs. Consulting

The Bs. consulting can take any values from business process like Bp1 or Bp1 or Bp2...

for this i have written validation macro

If Target.Address = "$C$21" Or Target.Address = "$D$21" Or Target.Address = "$E$21" Or Target.Address = "$F$21" Or Target.Address = "$G$21" Or Target.Address = "$H$21" Then

do the validation;

end if;

this works fine, but i need to use or condition , is there any better way to write this, a more compact way,

View 9 Replies View Related

Percentage Of Points Within Range Of Target

Nov 4, 2006

I have a number of columns, each containing several thousand points. For each column, I need to know the percentage of points that are within a certain percentage (1%, 3%, and 5%) of a target number.

View 4 Replies View Related

Return True When Comparing Target To A Range In VB

Nov 12, 2003

Why doesn't the IS operator return True when comparing Target to a range in VB when they are indeed the same? Why do we have to keep backing in via rng.Address = Target.Address or Not Intersect() Is Nothing?

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
****
****'_____Works_____
****If Target.Address = "$B$2" Then
********Application.StatusBar = "To Be"
****Else
********Application.StatusBar = "Not to be"
****End If
****
****'_____This fails_____
****If Target Is Range("A1") Then
********Application.StatusBar = "A1 sauce anyone?"
********
****'____But this works_____
****ElseIf Not Intersect(Target, Range("A1")) Is Nothing Then
********Application.StatusBar = "¿Alguien quiere salsa A1?"
****End If

End Sub

Again - this is just me wondering why... Am I missing something terribly obvious here?

(Edit) I am guessing it has to do with the Target argument for SelectionChange() coming in ByVal instead of ByRef, but not sure... (End Edit)

View 9 Replies View Related

Displaying Cell Values With Worksheet_Change By Value If Target Is In Certain Range

Nov 15, 2008

I have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now

View 3 Replies View Related

Cycle Through Cells In Worksheet_Change Target Range Selection

May 26, 2009

I am trying to look through a multiple selection of cells (in Target range) and compare to see if these are Integer. I am failing to be able to cylce through the selected cells and check their value. I am sure it is VB 101 issue... but I am lost at cracking it.

View 2 Replies View Related

Deleting / Clearing Multiple Cells In Target Range

Jun 2, 2014

I have a target range for a worksheet change. Then when finished I highlight the data and press 'delete' I get an error within the code.

View 2 Replies View Related

Automatically Populate Data From Target B Worksheet Into Target A Worksheet

Dec 3, 2012

I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.

View 2 Replies View Related

Find Value Of Target On Same Row As Target

Jun 4, 2008

I am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.

View 2 Replies View Related

Gap To Target Column

Aug 22, 2014

I want to create a chart that shows "Gap to Target. See attached Sample spreadsheet for more info.

Note how the yellow part of the chart is formulaic...is actually the chart...and the green bar over it is manually pasted. That green bar is supposed to be "result" and that yellow gap is supposed to represent the difference between Targeted sales and the actual Result.

How to actually build the green part into the chart? Every time I try, it just adds them together and doesn't show the gap.

Example.xlsx‎

View 4 Replies View Related

Add Value To Target Cell

Jan 30, 2014

Is it possible to add a value to a target cell without VBA Ie I have 3 worksheets and I would like to pull a varying cell value from each sheet to give me cumulative total on another sheet in a single cell.

View 2 Replies View Related

Target Cell Changes Value But Sub Does Not Run?

Mar 25, 2014

I have a simple sub below (CopyData) to copy a cell value (I2) to next unused row in column O. If I run the sub from the VB editor, it runs fine doing exactly what I intend to do.

I've tried several macros to cause this sub to run when the value of cell I2 changes but they all behave the same way. I am initiating worksheet changes using the F9 function key. I2 changes every time I press F9 but the CopyData sub doesn't run.

Below is the latest attempt:

Code:
Sub CopyData()
Range("I2").Copy
Sheets("Calculations").Range("O" & Rows.Count).End(xlUp).Offset(1, 0).PasteSpecial xlPasteValues
End Sub

Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$I$2" Then
Call CopyStuff
End If
End Sub

View 2 Replies View Related

VBA Intersect And Target

Jan 29, 2008

Im tring to run the procedure called KeyEventsOn ONLY when a single cell in range E29:E30 changes.

The Intersect and Target are borrowed from a book , I dont fully understand how these work. I am assuming that 'Target' should simply reflect the currently selected range, and the 'intersect' function runs a check as to whether the target is in the range to be checked.

The problem Im having is the variable 'Target'. If the above is true, why for example when I type 'ABC' into the current selected cell does the variable 'Target' show as "ABC" and not "$E$29" (or whatever cell is selected)...

View 9 Replies View Related

VBA Target.Address

Mar 21, 2008

what the Taget.Address relates to in VBA. I cant figure it out, how can this be used?

View 9 Replies View Related

Formula In Target

Apr 30, 2007

in selection change event how to identify formula in target?

View 9 Replies View Related

Daily Target With % Growth?

Feb 3, 2014

what i need to do to track daily sales with 10% growth from previous year total sales.

I have 12 separate sheets for each month.

On each sheet i have separate columns"date" "goal" "actual" "% from goal".

What function/formula is needed to calculate the daily target goal taking into account that weekends are busier

View 1 Replies View Related

Value Exceeding Target To Be Negative?

Dec 24, 2012

I'm working on a spreadsheet to measure performance.

Target is 10% and below

If actual is below or equal to 10%, then 100% achievement

If actual is above 10%, From 11% to 20%, then achievement is 90% and so on down until 0%

If actual is beyond 20%, then achievement should not exceed 0%

View 5 Replies View Related

How To Use Target Bval In A Sheet

Apr 14, 2014

I am trying use target Bval in a sheet. Can I give conditions like if only the value is number then trigger the code else no. Is there a possibility???

View 6 Replies View Related

CASE Depending On Target Value

Jan 20, 2009

How would I set up a series of CASES depending on the Target.Value (a doubleclick code within spreadsheet) such that IF target value isblank, then change to Ö. If target value is Ö, then change to "NA". If target value is "NA" then clear contents
Would CASE be the best way to go or a series of IF's?

View 3 Replies View Related

Automatic Target Adjustment

Nov 3, 2008

I am building a sheet of sales targets for 2009. With each month allocated a certain percentage of the annual target.

I wish to be able to take into account a change of target at some point in the year.

If i were to change the annual target in June, i need the spreadsheet to only change the monthly targets from June onwards, January - May are finished.

In the example attached there is a change in annual target in June. How do i calculate what the remaining month's targets need to be in order to meet the annual target while taking into account what has already been achieved and the shape of the budget as indicated by the percentages??

View 5 Replies View Related

Stop Count When Sum Target Met

Apr 20, 2010

I have a row of data that holds dispatch values by week. I have a second row of data that holds stock levels by week. I simply want to create a third row that tells me how many weeks of demand a stock level will cover.

The data looks like this (comma deliminated):

Week, 1, 2, 3, 4, 5, 6, 7, 8, 9
Stock, 26490, 24490, 22490, 20490, 18490, 14239, 17898, 13646, 9393
Dispatch, 2000, 2000, 2000, 2000, 4251, 4251, 4252, 4253, 2350

In this example week 1 would have 9 weeks of stock cover, week 2 - 8 weeks and week 3 - 7 weeks of cover.

This is calculated by summing along the dispatch row until the cumulative sum of dispatch exceeds the current week stock level; then counting the number of weeks in the sum that cumulatively are less than (but closest to without being over) the total stock of that week.

Currently we manually create a massive array that sums along up to 26 weeks in advance and then have a manual formula that finds the maximum value below the target. This then outputs the column reference and then calculates the number of weeks based on the difference between the week column and the column highlighted.

View 8 Replies View Related

Target Just Date In Any Format?

Oct 21, 2011

How can I target just a "date" in any format?

=IF(A2>"any date",A2,B2)

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved