Macro To Move Cells From One Sheet To Another Not Working?
Jan 24, 2014
I have two sheets and need information from Sheet titled Add-Del_chng positions to be moved to the sheet titled Cost Distribution.The issues here are :
1. The values in Cells A through J should be moved only if col Z value is 'hard coded"
2. The values should be moved to the 13th row.
3. This should happen every time the value is input into col Z of sheet titled add_del_chng.
Currently the macro does not run unless I go into the code and press play. I need this to happen automatically.
In Sheet1 is 11 headings. In column I, titled 'complete?' the user simply puts an x to show that the order is complete.
Once this happens, I would like the information in the row containing the x from columns A to I (but not J and K) to be copied to the next empty row in Sheet2. Then to clear the information from the cells in the row of Sheet1 from columns C to I, but have the data in columns A,B,J,K remain for the next order.
I have certain cells which I want the formulas hidden to the end user and protected so they can't update them.
I've locked and hidden these cells and protected the sheet however my Macro's fail to work thereafter.
Protect the sheet for the user interface only. This has to be done in VBA:
- Activate the sheet.
- Activate the Visual Basic Editor (Alt+F11).
- Activate the Immediate window (Ctrl+G).
- Type
ActiveSheet.Unprotect
- Press Enter. - Type
ActiveSheet.Protect UserInterfaceOnly:=True
- Press Enter.
The sheet is now protected for the end user, but VBA code can freely manipulate it.This works well however when I go to another page and do the same it stops working on the original sheet.I would like to know if there is an easy way to:
protect/unprotect all sheets in one go and have the macros still work?
When I protect pages individually I want the following to be allowed:
Select unlocked/locked cells Format Sort Use autofilter use pivottable
I will first save which cells are un/locked & hidden.
I am attempting to write a macro so that when a user selects enters a particular selection in a cell, it will automatically move the entire row down to the last row and shade it in a different colour.
I have a spreadsheet in which the user will respond to questions using "T" for "True" or "F" for "False". If there is a certain number of T's I would like the macro to take the user to one sheet in the workbook or if there are a certain number of F's I'd like it to take the user to another sheet in the workbook.
I am working on Excel 2000. I am creating a protected worksheet which will have conditional formatting and validation on manual input cells (formatted to light yellow). I want to make sure that people do not accidently forget and paste data into those cells. I read up on solutions from this thread; [url] and most of it seems to be more complex than what I needed (and I couldn't get it to work)
I copied some code from this website post [url] to my worksheet.
It works fine if the Validation criteria is set up simultaneously (i.e. it's all the same) but does not work if the columns have different validation criteria. How can I modify it to work under those conditions? I have included two workbooks, one in which the val critieria is identical (and it works) and one in which it varies between columns (and it doesn't work). I also noted that if I modify the one that doesn't work to make it homogenious, it still doesn't work unless I go back and highlight all and reformat that way.
I have a worksheet that has time clock information. I also have a resource on the web to see some information and even export it. In the exported data it looks as follows:
A1 contains an individuals name B1 says times i.e. "8am to 5pm"
I would like a macro that takes the data from A1 and moves it to another worksheet in the B4 position down, and take the times from B1 and move the first time to the C4 position and the last time to H4.
I have had several intro programming classes, but not with visual basic. I've noted the problem lines with comments below. The problems are probably very easy syntax error.
Sub list()
Dim counter As Integer Dim counter2 As Integer Dim id As Double Dim id2 As Double Dim palletnum As Integer
Hello all. I have the following code that works for Outlook 2003 but does not work for Outlook 2007. Does anyone know what changes need to be made so this macro will work in both Outlook versions?
I'm fairly new to macros but somehow i managed to create all the required macros for my project through googling and the like. The problem is that i created my macro enabled excel file in XP and when i transferred it to Windows 7 the auto save to PDF macro stopped working with the Runtime Error '5' Invalid Procedure, call or Argument. The highlighted error is as follows.
I have an excel file that contains data from bank transactions.
In column A at irregular intervals is a cell with " User Group:" It depends on how many transactions there are in a batch, could be 1 or up to say 200 as to when the next "User Group" cell is found.
After that also in column A is "Item" then "Lodgement Ref" then at the end "Batch Totals"
i.e. User Group: Item Lodgement Ref Batch Totals: User Group: Item Lodgement Ref Lodgement Ref Lodgement Ref Batch Totals:
I want to find each instance of "Item" then move that cell and every cell over to column CK down to and including "Batch Totals" i.e. A3401 to CK3410 to CM 3400 so it lines up with the top of the transaction block.
There are over 60,000 lines so it's worth trying to find a solution as I can then use the methodology to make other refinements in the spreadsheet.
I'm working with a large master list of part numbers, and matching data to these numbers from a varying data table via vlookup. I have to vlookup to the actual part number, (13,000 numbers), then subtotal the data based on the "Rollup" part number. (eg: Two different old PNs have now "rolled up" into a single part number. I am pulling sales data from all of the old numbers, and subtotaling the sales to the new number.) Too much information.
Here's my issue. After subtotaling on the rollup number, I want to copy and paste ONLY the rollup numbers and associated data to a different sheet. This should be easily accomplished by going to level 2 of the subtotals page, hiding all the old PNs and their data, selecting the remaining visible cells, then "Go To", "Special", "Visible cells". Normally, you could copy only the visible cells, and paste them wherever you want. But because of the total length of the subtotaled worksheet, (nearly 25,000 rows), I get the error message, "Micrsoft Excel cannot create or use the data range reference because it is too complex."
You can overcome this by selecting smaller ranges of data, and copying and pasting a little at a time, but since the "visible rows" will vary, I can't figure a way to incorporate this into a macro. I've tried setting specific ranges in the macro, and copying and pasting fewer cell at a time, but if the range named in the macro is a hidden cell, the macro won't select any of them.
Here's an example of what I've got so far. I realize it's not the most efficient code, but I'm working with limited knowledge and ability.
*i have about 2000 rows. *start from first row *for each row that contains .pdf in one cell, i want another cell in that row to equal .dir *hyperlink cell if cell contains dir *move onto next cell (for all approx 2000 cells)
The problem:
*it is hyperlinking every cell even if the other cell doesn't contain .pdf. *i think it is looking at the first row and if the cell has .pdf it applies it too all cells
What I want to do:
*select entire row of first row (21) *if col 21 = .pdf then col 23 = .dir *of col 23 = dir hyperlink .dir to fname value *move onto next row (22)....do the same....and so on and so on all the way to row 2039
I have written the below code (as part of a larger code set) to copy a range and paste it in cell Z4 if Z4 is empty. If it isn't empty, I want it to move one cell to the right and paste it in AA4. This should be a loop pasting one cell to the right of the last filled cell.
I have come up with the following which moves one cell to the right, but only once. It doesn't loop. Also, this loop operates within a larger loop.
Range("z4").Select If Range("z4") = "" Then ActiveSheet.Paste Application.CutCopyMode = False Else i = 1 Range("z4").Offset(0, i).Select i = i + 1 ActiveSheet.Paste Application.CutCopyMode = False End If
I need it to clear the contents from the cells, then copy a number of sets of cells from selector, paste them in to AM call plan and then delete the duplicates. My code is getting stuck very early in the whole thing. The copy, paste sequences, were originally recorded as a macro, then added to trying to get it to work.
Here is the code, and the red line of code is where it is stopping:
Sub Call_Plan_Targets() ' ' Call_Plan_Targets Macro ' Dim LR As Long Application.ScreenUpdating = False LR = ActiveSheet.UsedRange.Rows.Count
i think this will be simple for most of you. i need a macro that will move blocks of cells from one column into the succeding columns. say i have one column of 1000 values and i need to break that up into columns of 50.
I'm looking to automatically move data from my working worksheet, when a particular column states "Won" or "Lost". I'm hoping the entire row of data can be cut, and added to the appropriate sheet, determined by "Won" or "Lost".
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E----- Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
is there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
I need to move the rows from one sheet to another sheet upon clicking the ‘Submit’ button.
I will manually update my efforts in ‘Sheet 1’ and when I click ‘Submit’, it should “copy” the rows to the next sheet (Sheet 2). However, it should not duplicate the entries irrespective of clicking Submit multiple times. Obviously, while clicking ‘Submit’ it should check the entry for that particular employee name and date in the ‘Sheet 2’ and remove that completely and update the new entries and this should avoid duplicates for that date. Every time when I add new entries for a different name and for dirrerent employee, it should keep appending the Sheet 2.
In addition, it should avoid copying the blank rows from Sheet 1 (S. No column will not be blank usually) to Sheet 2.
All this should happen upon clicking the Submit button.
I have a macro which refreshes a query when the spreadsheet is opened. This works fine when online.
However, if the user is not online, the query is unable to refresh and the macro just hangs.
Is there a code which will enable me to say " if unable to refresh then move on to the next line"?
here's the code below.
Private Sub Workbook_Open() Sheets("Houselist").Activate Selection.QueryTable.Refresh BackgroundQuery:=False Sheets("Front").Select Range("A1").Select End Sub
Hi all! I'm hoping someone can help me as I'm trying to complete this for work ASAP. Here's the story. I want to automatically fill out the Monthly Log sheet using the information provided on the "Full Staff" sheet. If E9:E227 in the Staff sheet is listed as "CO", I want to copy the corresponding cells over to the corresponding cells in the Monthly Log Sheet. Also, I want it to automatically paste the information in the next available row (say rows 1-15 are being utilized, I want it to post in 16). Can anyone help?
