When a task is completed I want the row wher it is in to be placed to another sheet(Archief). When in column F the value is changed to 'FIN' the row(A5 till K5 in the file I attached) has to be placed to the sheet 'Archief' below the last completed task.
View 3 RepliesI am trying to subtract an amount from a cell until it reaches 0, then move and subtract from the next amount, and so on.
AmountFixed BudgetedResult53.50Subtracted 5 tell it hit zero1.30Subtracted remaining amount until zero43.8Subtracted remaining amount until zero3.8 was left over without hitting zero is good. Is there formula for this?
if there is a formular that would say if a certain cell reaches a certain value it will add 1 to another cell for example
if cell B2 reaches 24 then 1 would be added to cell B3
I am wanting to put a "1" in ROW 2, starting with COLUMN B until the sum reaches the value in cell A3.
Example: I have 10 in A3, I would like the macro to place a "1" in B2-K2.
example.png
I am sure this is simple and easy to do, but i am having difficulties achieving this.
I want the cell to fill as it gets closer to 100%, I am sure its conditional formatting but I cant seem to get it to work.
I'm trying to come up with a way that will populate a table after each cell reaches a certain value.
My first column has rows with the total time required to perform a certain operation. The columns after that, represent operators that should be picking up a certain amount of tasks that do not exceed a set time.
Let's assume that the first row (total operation) has a total of 550 sec. The second column (1st operator) should assign a a value of no more than 200 sec. The third column (2nd operator) another 200 and the fourth column (3rd operator) another 150. So as to create a spill over effect.
The second row has a different operator with a different time. Let's say 300. These tasks should be picked up by a fourth operator with a value of 200 and then a fifth with 100. All in all I would like the table to populate as below.
xxxxxxxxxxxxxxxxxxxxxx operator1operator2operator3operator4operator5
operation 1550 xxxxxxxxxxxxx200 xxxxxx200 xxxxxx150
operation 2300 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx200 xxxxxxx100
ignore the "x". I used those to make sure that the rows aligned with the columns
the code below works fine except for the fact that it takes FOREVER to complete as it has to loop through almost 2000 rows... How to optimize this code so the macro stops as soon as it encounters an empty cell? There is currently only 50 entries in the database, but with time it will exceed 1000 entries and therefore i can't simply say Range("H2:H50").
Code:
If OptionButton1.Value = True Then
'Show all Car Cases
Sheets("User-defined Database").Activate
For Each cell In Range("H2:H2000")
[Code]....
I have the word department followed by the department code in column A in an excel spreadsheet ie Department 50. Then say after 30 lines it may say Department 51 and so on. I want to copy down the cell containing the text "Department 50" in coulmn A until it reaches the word "Department",I then want it to copy down that cell ie "Department 51" until it reaches the word department again and so on. How I can do this?
View 4 Replies View RelatedCell I5 has the sum of cells A5:H5. Every time the value of cell I5 reaches the next million, I'd like for the date that it reaches the next million to be displayed in J5.
View 9 Replies View Relatedformula which uses 4 cells
the 4 cells are
Cell B2 - this is a set figure which is the initial base figure - currently set to 43
Cell C2 - This subtracts Cell B2 figure (which is 43) from Cell E34 [=SUM(B2-E34)]
Cell E34 - Is a cumulative total of 4 cells [=SUM(E4,E12,E19,E26)] and displays the total.
Cell D2 is a set figure of 49
The formula I am looking for is once C2 reaches zero, I need C2 to remain displaying zero and the remaining figure to be deducted from D2 and displayed in that cell so C2 figure would descend from 43 until it reaches zero. but would then start decreasing D2 whilst C2 would remain static at zero and carry that the remaining figure to D2 which would be deducted from the starting total of 49 and display the figure.
How would you write a custom function that you could plug in a cell that would do the following.
If the value in the cell is greater than 0, traverse up that column to clear the values until it reaches the cell in that column that has been colored orange.
I need write a VBA code that will move an entire row into a new sheet if the value of the last cell says "YES" If the value is blank then Id like it to stay in the current sheet. I would also like it if the cell wont allow any other value other than Yes to be typed.
I found this code here:
Copy, Move and Delete Row, based on Cell Value
THE VERY FIRST CODE REPLIED IN THAT THREAD.
I just cannot seem to get it to work. Simply copying and pasting that into the module doesn't work. I am not very good at VBA and just started taking a course on VBA. Id like to jump into this problem asap as I need it for work.
Basically:
Columns A:E will have values. In Column E I would like to type in Yes if completed. I would like the Macro to run through all of Column E and if the cell value is "YES" then I want it to cut the entire row and paste into a new sheet. In the new sheet I would like it to be pasted into the next available row.
Also can I create this with a ActiveX control button? I would like to have a button that I can click at the end of my work which will run the Macro in sheet 1.
Im trying to create a macro that when ran it copies all information from that row and puts it on a different worksheet. It needs to be put on the next available line in the new worksheet. and then the information deleted off the original and all rows moved up to fill in the gap. the rows all contain 2 formulas i'd like to keep specific to the row number Also it contains formulas id like to keep but change the cell numbers according to which row it is copied over to.
View 2 Replies View RelatedI am maintaining a spreadsheet to enter all my sales orders. I need a code which automatically moves the entire row to a new sheet "Completed" when the order status is selected as "Completed".
View 6 Replies View RelatedI would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time.
Example:
Sheet 1 � is current jobs and sheet 2 is old jobs.
My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2.
I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
I have a worksheet that has time clock information. I also have a resource on the web to see some information and even export it. In the exported data it looks as follows:
A1 contains an individuals name
B1 says times i.e. "8am to 5pm"
I would like a macro that takes the data from A1 and moves it to another worksheet in the B4 position down, and take the times from B1 and move the first time to the C4 position and the last time to H4.
A button macro that will move the whole row of the selected cell to another sheet?
View 3 Replies View RelatedI have two sheets:
1. Not yet printed
2. Printed
My data is in sheet 1 (Not yet printed). I would like to move automatically entiry rows (sometimes more then one) to sheet 2 (Printed) based on one cell's value. Here is a screenshot:
For example when I enter into Sheet 2 '264450' then row 2 would have been moved to Sheet 2.
And also with multiple rows, if I enter '264461' then row 4 and row 6 would have been moved to sheet 2 as well. I wouldn't like to enter a value more than once.
situation: 3 rows of data, row 1 has HDR in several cells (always in A1).
task
1. search row one for next example of cell containing HDR, excluding cell A1.
2. IF found, create a new worksheet and move all data below and/or to the right of that cell to the new sheet.
3. Repeat steps two and three until the search does not turn up another HDR except in A1.
I have forms and want the scrol bars to only move the form to the edge of the sheet instead of ten or mor cell beyond.
View 2 Replies View Relatedi am making a simple complaint tracking system and there is a column where there are two choices Resolved and Unresolved if you choose resolved it copies the row to the resolved sheet and if it's unresolved it copies the row to the unresolved sheet. i attached a template to give you an idea, i want the first complaint to be copied to the resolved sheet and second one to the unresloved sheet, i don't want the status column which contains the choices to be copied to the other sheets, also the unresolved sheet doesn't have a 'date closed' column because the complaint is not yet resolved so i dont want it to be copied there, i want it only in the resolved sheet.
[URL]
I have a number of worksheets and need to move data from the same cells of each work sheet to a summary worksheet. I manually entered the cell id's for the first sheet.
Example =Jan!M6, =Jan!N7, =Jan!O9 etc.
I know I should be able to automatically enter these same cells for the remainder of my worksheets with out manually going in and typing each one (there are a lot of entries.) I just can not remember how to do it. The next sheet is named "Feb" and "Mar" etc.
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
Test3.xlsm
I need to move the rows from one sheet to another sheet upon clicking the ‘Submit’ button.
I will manually update my efforts in ‘Sheet 1’ and when I click ‘Submit’, it should “copy” the rows to the next sheet (Sheet 2). However, it should not duplicate the entries irrespective of clicking Submit multiple times. Obviously, while clicking ‘Submit’ it should check the entry for that particular employee name and date in the ‘Sheet 2’ and remove that completely and update the new entries and this should avoid duplicates for that date. Every time when I add new entries for a different name and for dirrerent employee, it should keep appending the Sheet 2.
In addition, it should avoid copying the blank rows from Sheet 1 (S. No column will not be blank usually) to Sheet 2.
All this should happen upon clicking the Submit button.
way to do this in plain excel (no macros, I have sufficient knowledge to do it in VBA but certain circumstances do not allow me to).
I want to insert a relative formula into a cell based on a condition.
For instance, I have a number N=10 (changeable).
And the following cells with corresponding formula:
A1=1
A2=A1+1
A3=A2+1
........
Is there a way to automatically insert that relative formula to the next cell until its value is larger than N?
I don't want to use IF and then copy to 65000 rows either, it will create blank cells that I don't want to be there (and it affects the printout as well as the scroll on the right).
The problem that I have is rolling over the sum total after the meter read reaches thousand it starts at 1 again, but I need the total KMs traveled for example in the car dash board the odometer shows 945 when I started my trip and end at 24, how would I set up a formula in excel to calculate the total KMs traveled
View 9 Replies View RelatedI have some information in a column where I have different types of references in each cell with some blank cells in between. I am trying to write a macro that will go down the column until it gets to a cell containing the reference "THIS PAYMENTS" and then copy that cell reference down until it reaches a cell containing "Y-T-D AMOUNTS".But I want the loop to carry on until it reaches another cell containing THIS PAYMENTS.I want this to repeat for about 3000 rows See here before and after result.
Before
After
PERIOD
PERIOD
[Code]....
I have a list:
Item Code - Description - Quantity - Date
02099 - Blue Widgets - 500 - Jul 1
02099 - Blue Widgets - 200 - Jul 2
02099 - Blue Widgets - 300 - Jul 5
02099 - Blue Widgets - 500 - Jul 9
What formula can I use that returns the date (Jul 5) once the Widgets reaches 1,000 pcs?
If I have a worksheet and it has 100 rows, I would like for column D to auto-populate with a predetermined formula all the way down to row 100, not row 101.
View 3 Replies View RelatedI am having trouble setting up my cycle count spread sheet. For instance if my starting number is 1000 and when it reaches 0 or below it starts to count in minus when I just want it to automatically reset to 1000
View 3 Replies View Related