the code below works fine except for the fact that it takes FOREVER to complete as it has to loop through almost 2000 rows... How to optimize this code so the macro stops as soon as it encounters an empty cell? There is currently only 50 entries in the database, but with time it will exceed 1000 entries and therefore i can't simply say Range("H2:H50").
Code:
If OptionButton1.Value = True Then
'Show all Car Cases
Sheets("User-defined Database").Activate
For Each cell In Range("H2:H2000")
Sub del() Dim myRange As Range Set myRange = Range("AK3:AL3" & Range("AL" & Rows.Count).End(xlUp).Row) For i = 1 To myRange.Rows.Count If myRange(i, 1) >= myRange(i, 2) Then myRange(i, 1) = "" myRange(i, 2) = "" End If Next i End Sub
How do I add a condition that will stop the macro if myRange = ""/is empty?
I seem to be lost in some macro-coding... I have this folder with pictures, and I want to display them as comments, by a macro. So far I have control. But then, if there is a picture that is missing, or if there is a cell that is empty in the selection, everything seems to stop.
the macro I use is very simple, but when everything is in place, its working:
Sub pics() For i = 3 To 50 PicName = "C:UsersEspenPicturesHus" & Cells(i, 1) & ".jpg" With Cells(i, 1).AddComment .Shape.Fill.UserPicture PicName .Shape.Height = 300 .Shape.Width = 400 End With Next i End Sub
Is it possible to make the macro run even if there are wholes, or if some pics are not store in the folder yet?
Is it possible to make the area "unlimited", as you see its now limited from 3 To 50.
And is it possible to make this run automatically, kind of checking the folder on its own to see if there is new pics?
I have some information in a column where I have different types of references in each cell with some blank cells in between. I am trying to write a macro that will go down the column until it gets to a cell containing the reference "THIS PAYMENTS" and then copy that cell reference down until it reaches a cell containing "Y-T-D AMOUNTS".But I want the loop to carry on until it reaches another cell containing THIS PAYMENTS.I want this to repeat for about 3000 rows See here before and after result.
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
When a task is completed I want the row wher it is in to be placed to another sheet(Archief). When in column F the value is changed to 'FIN' the row(A5 till K5 in the file I attached) has to be placed to the sheet 'Archief' below the last completed task.
I'm trying to come up with a way that will populate a table after each cell reaches a certain value.
My first column has rows with the total time required to perform a certain operation. The columns after that, represent operators that should be picking up a certain amount of tasks that do not exceed a set time.
Let's assume that the first row (total operation) has a total of 550 sec. The second column (1st operator) should assign a a value of no more than 200 sec. The third column (2nd operator) another 200 and the fourth column (3rd operator) another 150. So as to create a spill over effect. The second row has a different operator with a different time. Let's say 300. These tasks should be picked up by a fourth operator with a value of 200 and then a fifth with 100. All in all I would like the table to populate as below.
I have the word department followed by the department code in column A in an excel spreadsheet ie Department 50. Then say after 30 lines it may say Department 51 and so on. I want to copy down the cell containing the text "Department 50" in coulmn A until it reaches the word "Department",I then want it to copy down that cell ie "Department 51" until it reaches the word department again and so on. How I can do this?
Cell I5 has the sum of cells A5:H5. Every time the value of cell I5 reaches the next million, I'd like for the date that it reaches the next million to be displayed in J5.
Cell B2 - this is a set figure which is the initial base figure - currently set to 43 Cell C2 - This subtracts Cell B2 figure (which is 43) from Cell E34 [=SUM(B2-E34)] Cell E34 - Is a cumulative total of 4 cells [=SUM(E4,E12,E19,E26)] and displays the total. Cell D2 is a set figure of 49
The formula I am looking for is once C2 reaches zero, I need C2 to remain displaying zero and the remaining figure to be deducted from D2 and displayed in that cell so C2 figure would descend from 43 until it reaches zero. but would then start decreasing D2 whilst C2 would remain static at zero and carry that the remaining figure to D2 which would be deducted from the starting total of 49 and display the figure.
How would you write a custom function that you could plug in a cell that would do the following.
If the value in the cell is greater than 0, traverse up that column to clear the values until it reaches the cell in that column that has been colored orange.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004' Application-defined or object-defined error
I would like to have an alert msg to prompt the user whether he/she wan to proceed to run the macro upon the macro button is pressed. However the alert msg will only pop up if cell value, A1 is not empty. In the alert msg, The user will have an option to choose to run the macro and do not run the macro.
Another question. I have a macro copy some data from other workbooks. I would like to alway return to a worksheet, named"Summary" after the macro is run. any way to do that ?
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
I am trying to write a macro which searches for a certain value (*?CNMT_LBID) in my worksheet, then copies it, plus the two cells to the right of it, to the first empty cell in the row above.
I have got so far, but am now stuck! I am not sure how to specify the row above my current cell, and then find the next blank cell to paste into.
Also, I'm not sure if my code is correct, any corrections are welcome!
Sub Move_Data() ' Dim i As Integer 'for loop below Dim rng As Range 'Cell to start 'cut' from
'rng = cell containing "*?CNMT_LBID" Set rng = .Find(What:="*?CNMT_LBID", After:=ActiveCell, LookIn:=xlFormulas, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False) 'Loop to cut cells "*?CNMT_LBID" plus next two columns to the right, and place in empty cell in row above For i = 0 To 2 rng.Offset(0,i).Cut( ) Next
I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()] ' ' CopyData Macro ' Copy The Data To Build Graph '
I have the following Macro to transpose data from a column into succesive rows. I need it to repeat, until it has processed all data in column A / until it reaches an empty cell in A.
The following macro does well at concatenating 2 constant values and the values in columns A and CF and places it in the CP field. What I need to know is is it possible to modify this code so if there is NOT a CF field cell value (that is it is blank) that the formula does not run and moves on to the next row? That is, the CP1 cell remains blank?
In columnA I want to jump to the next blank cell in a list that continues to grow. So the first time I run the macro I want to go (blank) cell A5 to paste in some data. The next time I run it, it would need to go to cell A6 and so on.
When I do this manually, I simply hit ctrl down-arrow (takes me to the last cell w/data) and then one more down-arrow to take me to the empty cell below.
When I do this in the macro it seems to remeber the cell as an absolute reference (if that's the term) and so it just copies info in the same location as previous, instead of the next empty cell.
I have this macro and at the present time, can only compare two worksheets. One of my worksheets contains column headers with data, the other worksheet just contains column headers. The macro will match the data against the column header and paste below. I'm doing it this way because I have several tables I export from a MySQL database, but some of them have more fields than others so I was trying to get all of the data to line up in under the correct column header from each table. I need editing the macro to allow for
1) More than one worksheet to be analyzed at a time 2) If the first request is not possible, I would like for the macro to paste results at the next empty cell. As of now, it will only copy one at a time (which requires me to house the data in another worksheet everytime I run the macro).
Below is the code:
Dim ws1 As Worksheet, ws2 As Worksheet Dim HeaderCells As Range, Hdr As Range, hdrFIND As Range
Application.ScreenUpdating = False 'speed things up Set ws1 = ThisWorkbook.Worksheets("HEADERS") 'Define name of worksheets Set ws2 = ThisWorkbook.Worksheets("B")
