situation: 3 rows of data, row 1 has HDR in several cells (always in A1).
task
1. search row one for next example of cell containing HDR, excluding cell A1.
2. IF found, create a new worksheet and move all data below and/or to the right of that cell to the new sheet.
3. Repeat steps two and three until the search does not turn up another HDR except in A1.
I would like to move the current row of data to another sheet when I change a value in the row from an x to an s. I think I could use an If statement, but if you can move data from one worksheet to another, I don't know the syntax to use.
View 9 Replies View Related I have a worksheet that has time clock information. I also have a resource on the web to see some information and even export it. In the exported data it looks as follows:
A1 contains an individuals name
B1 says times i.e. "8am to 5pm"
I would like a macro that takes the data from A1 and moves it to another worksheet in the B4 position down, and take the times from B1 and move the first time to the C4 position and the last time to H4.
I have a number of worksheets and need to move data from the same cells of each work sheet to a summary worksheet. I manually entered the cell id's for the first sheet.
Example =Jan!M6, =Jan!N7, =Jan!O9 etc.
I know I should be able to automatically enter these same cells for the remainder of my worksheets with out manually going in and typing each one (there are a lot of entries.) I just can not remember how to do it. The next sheet is named "Feb" and "Mar" etc.
I have sheet 2 with a table with data in A2 thru X500, A1 thru X1 are my headers, A1 data is either Forecast or Sold, B1 data is Month, C1 is Value. I first need to Filter the data by Forecast, then by a specific month then by the value in decending order (keeping in line the data thru x which are headers I don't need to sort by). Next I need to take the 1st 10 lines by a specific month; A thru X and copy it onto a defined section on Sheet 1.
I then need to do this for the 2 more times for the 2 proceeding months. So If we start with Jan, I need the macro to do Feb and march as well.
The end result is that I have Sheet 1 with 3 sections on it each section is 10 lines and the resulting data is my top 10 forecasted deals for Jan, Feb, March. The macro must be able to do this for each month, so if June is chosen the 3 months are june, july and Aug.
I have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
I need to create a macro to move variable multiple horizontal data to vertical format with certain infomation on horizontal will be duplicated following that variables. It's looks like below where you can see variables data in column F, G, H and I are moved vertically and at the same time column A, B, C, D and E will be duplicated following the variables allocation. I've tried to use transpose but it too manual and now looking suitable macro to help on this function
Original DataAccountDim 3Dim 4AmountCurrencyV20228V20242V20211V202044006003300BXXX 9.4USD0.591.923.343.554006003400BXXX 88.17USD5.5118.0331.3233.314006003500BXXX 7.27USD0.451.492.582.75Process to automateAccountDim 2Dim 3Dim 4AmountCurrency400600V202283300BXXX 0.59USD400600V202283300BXXX 1.92USD400600V202283300BXXX 3.34USD400600V202423300BXXX 3.55USD400600V202423400BXXX 5.51USD400600V202423400BXXX 18.03USD400600V202113400BXXX 31.32USD400600V202113400BXXX 33.31USD400600V202113500BXXX 0.45USD400600V202043500BXXX 1.49USD400600V202043500BXXX 2.58USD400600V202043500BXXX 2.75USD
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
Test3.xlsm
How can I move data from one worksheet and place in another worksheet in the appropriate column? I exported data from Access to Excel in order but I need to group the data in excel.
View 3 Replies View RelatedI need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
I need a code that will allow me to move data from a worksheet to a worksheet from which I came from. e.g. worksheet "Sheet 6" opens "Sheet 10", then after filling data in "Sheet 10" I need to move this data back to "Sheet 6" in the cells in range "F12 to F56". Please note that the data in "Sheet 10" is in the same range as in "Sheet 6"
View 1 Replies View RelatedI have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
I'm looking to automatically move data from my working worksheet, when a particular column states "Won" or "Lost". I'm hoping the entire row of data can be cut, and added to the appropriate sheet, determined by "Won" or "Lost".
View 5 Replies View RelatedI need to do is move a list of data in an excel worksheet to Notepad. The data is 16 numbers long, but the Notepad needs to be left justified to 19 characters. I can't figure out a way to move spaces over to notepad.
View 6 Replies View RelatedError in the code, where I'm trying to copy the data (based on criteria) from one worksheet to another, then delete the data from the first worksheet. In the code (I have complied from this message board) I get an 1004 error "Application-defined or Object-defined error".
Code:
Option Explicit
Sub CopyALColKYes()
Dim NR As Long, c As Range, firstaddress As String
Application.ScreenUpdating = False
NR = Sheets("Completed-Expired").Cells(Rows.Count, 13).End(xlUp).Row + 1
[Code] .........
Is it possible to have a macro compare two wokrsheets and move the totals from one sheet to the other worksheet.
Here are the worksheets: ....
Im building a Menu list for my customers. I want to do it in XL sheet format. Can i know how to create tabs (like hand should apprear,when cursor come to the tab and should be like button, where we can name it) in the main sheet?. I have lot of innovative Ideas to come with beautiful menu file i need your assistance further to build my menu list.
View 9 Replies View RelatedI have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View RelatedI am trying to find a macro that will filter on Column F (non-blanks - just cells with dates) cut just the filtered data (A:G inclusive)without the Header Rows and then paste/move this data to the first empty row on another sheet called "Complete"
So that I get the cells in columns A:G with dates in moved to the "Complete" tab and they are no longer in the sheet "Deliverables"
I have a formula sheet that uses an IF statement to determine if one columns data is bigger than another. Out of the 300 or so rows there are approx 20 that come back as yes (this is in column A) and the rest are blank
What I would like to do, is for the 20 or so rows, I would like to pull out (copy) columns B, J and L and put them into worksheet 2. Preferably without any gaps in the rows or columns.
I hope this is enough information, I am using MS excel version 2010 although I think the people who will ultimately be using it are on an earlier version.
I have a excel file with two tabs, one with raw data, with data ordered by geographic region.
I have another blank tab, where I've created a dropdown list of the geographic regions.
How do I move all the data from worksheet to the other based on that geographic region?
I have an excel spreadsheet,I have a problem and I need a macro , in sheet1 I have several values of 7 numbers in a cell, example 1|2|3|4|5|6|7| up to 93|94|95|96|97|98|99|, which can be found on the columns A, B, C, D, E, F, G, H, I, and I want for example to extract all values that begin with the number 1 ,and to put all the values in the worksheet 2 columns A, B, C, D, E, F, G, H, I,,
For example 1|2|3|4|5|6|7| ,,,,,, up to 1|94|95|96|97|98|99| moved in sheet2 from sheet1.
I tried to extract the filter from the data tab .... sort and filter,,, filter,,,, filter by number,,,, starting with,,,, we apply the filter, but when we selected data values and take that were among the selected what was not good.
I like this :
column A 1|2|3|4|5|6|7| , 21|25|32|43|51|60|73|, 1|2|3|4|52|69|78| ,11|12|30|45|50|61|79| ,3|5|70|74|75|77|79| , 1|22|33|44|50|63|75|, 1|22|33|44|50|63|75|................
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| , 11|21|31|40|52|61|70| , 9|2|3|4|50|68|70| , 1|12|13|24|51|60|77| ,.........
column C 1|2|3|4|50|65|70| , 2|5|7|9|10|16|37| ,5|8|9|14|15|26|67|,,,,,,,,,,,1|94|95|96|97|98|99|.
In these columns I want to extract all values that begin with nr1 .....1|2|3|4|5|6|7|,,,1|90|91|92|93|94|95| from sheet1 in the sheet2, I mean these...
column A 1|2|3|4|5|6|7| ,1|2|3|4|52|69|78| ,1|22|33|44|50|63|75| ,1|20|31|43|55|60|71|
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| ,1|12|13|24|51|60|77|
column C 1|2|3|4|50|65|70| , 1|94|95|96|97|98|99|
I have some code that unhides the next worksheet when the value 'next' is selected at the bottom of the sheet being completed.
I would like to add some code so that the new sheet is opened and the curser is placed in the first cell that needs to be completed (E5).
Is it possible to create a cell in one sheet, where after data is entered, will move it to another sheet. Additionally, the data in the cell, after the transfer to another sheet is made would delete itself. Once the data is entered, sent to another sheet and deleted, next time data is entered into the same cell, it would be sent into a row below the cell that the first piece of data would be in. Therefore, after I enter data, [for example] press enter, then go back to input some more data, after a while there would be a long list in another sheet. The last feature of the problem (it would be something extra really) is that the function/macro is to be time dependent - during one month the data would stack up in one column, after the next one begins, the next column will automatically start all over.
The idea is to create a budget book - where on the main page I would only have to enter the value in a specific box, the value then would be automatically sorted into the right row and column in another sheet, after the month/week ends, data would start to stack up in a column devoted to a new month/week.
Of course the data could be entered manually in different sheets, but it proved to be too complex to be useful.
So I have a sheet that has 9 columns A - I sheet is called "Door Switch Times"
Basicall when column F gets data in it I need then a macro to automatically Copy B, C, D to a
new sheet called "Main". I need B to be copied to C on Main, "C" on Door Switch Timse to be copied to "D" on main and "D" on Door Switch Times to be copied to "E" on Main. I cant post the sheet as my work computer will not allow me to transfer or share files.
Here's a sample sheet.
I receive spreadsheets with data sorted by column. There might be 500-600 records in approximately 1-8 categories, 14 columns wide. One column is used for the category. I would like to copy or move the data in each category to a new sheet within the file, so I can work with each category separately. I do this manually now, and have to do it multiple times for each file, as the data changes daily.
The category names are rarely the same from one batch to the next, so the routine will have to look at the categories and understand their names in order to put the data on a new sheet. Category names are alpha-numeric, like RA114, RC109.
This seems like a VB app, but I don't know VB! Is there a way to do this without VB? If not, is there a well-documented VB template or utility I might use to modify?
I've got a workbook with a sheet named Data that has the information laid out in a single row. The data can't be fit onto a single sheet for printing / viewing so I've got a second sheet named Presentation that the data get's laid out to 2 rows so that it can be viewed / printed on a single page.
I'm handing this off to non-technical people so I need an easy way to populate the presentation sheet with the data. I've layed the data out using =Data!A1 however, the drag auto-fill doesn't properly fill it down since it's single row to double row.
Example of Data Sheet
Patient
Chart
[Code]....
I have Excel 2003. I need a formula that will automatically move data in a row to another sheet, in the same workbook, based on either a two digit department code or possibly a date. I enter information on a master sheet, (8 columns of data: Text/$/digits) and I need that information to separate out to the other sheets when that department's two digit number is entered on this sheet. There are a total of 6 sheets in this workbook, counting the master. The data I am entering will be about 40-50 rows down of information, 8 columns across. Will this take a macro? Loop?
View 9 Replies View RelatedI've been working on a spreadsheet for the past 12 hours on a sunday when I should be home eating or something (damn projects).
Basically, what I need to do via a button on 1 sheet, is select all rows of data that have a certain variable in a fixed column. E.g. "CLOSED" in Column AV for example.
Then I need to CUT all of those rows out, and paste them into a worksheet with the exact same column layout, under the last used row.
r = 6
For i = Selection.Rows.Count + 1 To 1 Step -1
If Worksheets("Live"). Range("AU" & i).Value = "Closed" Then
Worksheets("Live").Range("AU" & i).EntireRow.Copy Sheets("Closed").Cells(r, 1)
Worksheets("Live").Range("AU" & i).EntireRow.Delete
r = r + 1
End If
Next i
I dont know whats goign wrong here. Its not doing anything! As far as i understand the code above, its doing the following:
Sets the loop to increment in steps of 1
Searchs the range AU1 for "Closed"
If the value is "Closed", copy the row, and paste it into the sheet called "Closed" in the cell: 6,1.
If the value isnt closed, then proceed to AU2.