Move Multiple Line Markers To Appropriate Columns?
Aug 16, 2014
I want to create a chart where I have 5 clustered columns, repeating 4 times(weeks). Each column(total invoices entered per user) has a error rate, which I would like to display as a line graph with markers. In other works, first column has its own line, second column has its own line etc. this spans the 4 weeks. When I create the chart now, ALL 5 the line markers are placed in the same one column. I can not move the line marker to sit on top of the column it is associated with.
I have some data where I am plotting cumulative M events versus time (blue). I would like to make a tick mark, or dot or something to indicate when event N (pink) occurs on the blue line. Imagine that I am measuring eating (M) versus time and that I want to show on that line the points when food is delivered (N). this is the plot I desire (ive shown some ticks and dots as examples, how can i do either one?): http://www.yousendit.com/transfer.ph...2F360E1F246391 and this is my data/current plot: http://www.yousendit.com/transfer.ph...27974E102C0620
I found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA() Do While ActiveCell <> "" Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0) ActiveCell.Offset(0, 1).Select Loop End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
I have an excel workbook with 8 worksheets. Each worksheet has vertical columns (approx 250 columns per sheet) of numeric data. Is there a function or macro that will combine all of this data into one vertical column without having to individually cut and paste each one into the new column?
I'm having troubles with a spreadsheet and unfortunately don't know enough VBA to fix it. I have two columns, each with data like so (standard text) separated by a line break:
Object1 Object2 Object3 value1 value2 value3
And I need them separated like so:
Object1 Value1
Object2 Value2
Object3 Value3
with other items in the row from other columns applied to the new rows accordingly.
Any script/macro/tool (even non-Excel) to do this effectively (over 800 rows)?
I am trying to move information that is pulled from a database to look cleaner and easier to read. All of the information exports out into column A only. The attachment is a brief example of what it looks like, and what I’m trying to get it to look like.
I want to move the data in col A to 5 columns C through G in groups of 16 rows. Once the last column is filled with a group of 16, it needs to fill below the first group of 16 in column B onward to column F. It should repeat this process until there is no more data in A. The attachment shows it much better than i can explain it.
I have some basic experience with formulas and macros, but I haven’t had any luck trying to manipulate any of them to give me the information the way I have shown. I would prefer to not have to manually type or cut and past the information in if possible.
How can you move data from multiple columns into a single column? I have attached a short example of the data I receive. (In reality, the data could be hundreds of columns and/or hundreds of rows, but this is representative of what I might receive). It does not need to be sorted and including the header row in its own column is optional. I do not know VBA all that well but can muddle through it if someone can give me an example of what the code should look like.
I saw this thread from June Cut & Paste Macro: Move Address From Column To Row and I think this what I would like to have my macro do. I have one column which is copied and pasted as text in excel and there is several blank rows.
I attached the spreadsheet example - it has 40 lenders, with the top row being the lender name (A1), followed by address(A2), city-state (A3), two blank rows(A4-A5), lender type (A6), approved date (A7), one blank row (A8), lender specialty (A9), telephone (A10) , e-mail address(A11) and two blanks rows (A12-A13) and A14 starts over again. For this example there should be 8 columns and 40 rows (lender name, address, etc...). As I mentioned I think the previous thread's macro would work with some minor tweaks. I couldn't figure out the best way to handle the blank rows and or remove the blanks and what to add or take out of the macro code.
I am using excel 2007. I have data which, instead of being posted on multiple columns, is all within 1 column. The data most simply has the characteristics of:
AAA AAA - description BBB BBB - description CCC CCC - description and so on..
I would like to move the descriptions from column A to column B: AAA AAA - description BBB BBB - description CCC CCC - description and so on...
I have about 180 workbooks which I need to compile into a Master Schedule.
All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?
Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?
Removed screen shots - Please DO NOT use actual personal information, sample data only! - Moderator
Some of the people on this list have a second name entry on the line below their first name entry. ALL of the people on the list have an Address2 on the line below their Address1.
How would I move the second name entry into the cell next to the first name entry, and then concatenate them, and then also move the Address2 entry into the cell next to Address1 (but not concatenate these)?
Here how it works, if B3 is the same color as the reference cell $A$76 and D3 is different than D4 then the result is 1
I would like this function to work from line 3 to line 60 and return the total of lines where the conditions are met. I'm thinking of a =COUNTIF function but can't get something to work. If there is a simpler way, it's even better. The IfColor is a function I wrote in VBA,
I am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
I have been using the below macro that has worked a treat, however I need it to copy as value as when it moves over some of the formulas and links go a little funny.
[Code] ......
What amendment I would make so that it pasted special as value?
if I wanted to slowly move a shape (small circle) in a straight line between cells R20 & W7.
The straightest line possible is by drawing an arrow line between the 2 cells.
Is there a way to then use this arrow as a guide for moving the shape?
In other words, would it make sense for the porgram to draw a transparent line between the cells, and use that line as a "path" along which to move the shape?
I am using Excel to create a parts list for a manufacturing assembly. I intend to have 6 categories (columns) for each part or instance. My problem is that the last (furthest right) entry will sometimes contain more characters than others. I want to limit the number of characters in the cells of this last column, and I have seen how to bump the remaining characters down to the next row(s) in the same column using the LEFT and MID formulas. This actually works very well for that purpose. However, I need to know how to force the next instance (row of 6 cell) to start together on the next available row.
The following images should better illustrate my question. First, I show the source data with the contents of cell F2 without further formatting. This cell contains more characters than I want making the column too wide for the printable space allowed. http://www.ozgrid.com/forum/attachme...1&d=1198374241
The next image shows the desired result with the extra characters from cell F2 moved to F3. (This data could actually fill up to 4 or 5 cells vertically.) Here, I have manually entered cells A4 through F5 for this illustration. I need to know how to automatically have A, B, C, D, & E move along with F. http://www.ozgrid.com/forum/attachme...1&d=1198374241
Column A | Column B | Column C Los Angeles | Fire Dept | 3 Los Angeles | Health Services | 12 New York | Fire Dept | 8 New York | Health Services | 22 New York | Internal Services | 100 New York | Public Works | 7 Chicago | Health Services | 15 Chicago | Public Works | 56 Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept Health Services Internal Services Public Works Social Services
I have a spreadsheet with 4 voltage value series (Bus voltage, two capacitor bank voltages, and a meter voltage). My issue is that I would like the markers on the chart for the capacitor bank voltages to be formatted according to another open/closed column of the capacitor banks. I would like the markers to be hollow if the capacitor bank is open and filled is the capacitor bank is closed. Is this possible without using VBA?
I need a code to look for the same numerical value on Sheet1. The same value will be found only once in 5 different columns: R,AA,AJ,AS,BB. if all at least 2 columns or all 5 columns have same value, (example for value of 1, found in column R) the value for the cell offset,4 to the left of the column will display on Sheet2 where the corresponding (example for value of 1) will be found in column A.
Therefore, offset cells' value for R will display in Column C for the Row value 1 in Column A....
I have been confronted with an issue that has bugged me: Now do I extract a part of the string according to lets say "markers"?
Here is what I mean:
I use the code below to get the bottom range of my tables:
Code:
blimit = Activecell.Address
I haven't had problems because my tables were small, then I would:
Code:
blimit = Right(blimit, 3)
If the table was small there was no problem, since lets say the Activecell.Address = "$C$123", resulting in blimit = 123.
My how do I extract a part of the string, knowing I have 2 "$" ? That way I would make a version of this that always works.
I cannot use FIND or any formulas I am aware of since they all start counting from Right to Left... I thought of using Replace() to get the first "$" and change it for something else like "-" then looking for the second "$". But Replace() basically changes both signs... making my idea... well obsolete...
Now do I extract a part of the string according to lets say "markers"?
Here is what I mean:
I use the code below to get the bottom range of my tables:
Code: blimit = Activecell.Address I haven't had problems because my tables were small, then I would:
Code: blimit = Right(blimit, 3) If the table was small there was no problem, since lets say the Activecell.Address = "$C$123", resulting in blimit = 123.
My how do I extract a part of the string, knowing I have 2 "$" ? That way I would make a version of this that always works.
I cannot use FIND or any formulas I am aware of since they all start counting from Right to Left... I thought of using Replace() to get the first "$" and change it for something else like "-" then looking for the second "$". But Replace() basically changes both signs... making my idea... well obsolete..
In the attached spread sheet I have created a scatter plot. How can I label each of the markers with its appropriate label from Column A - the Company Ticker. When I right click to show data labels it brings back the incorrect column. Also is there a way once the labels are brought in to put them in the circle and so that the chart doesn't look too clumped together.
whilst trying to format a data series in the attached chart, i cannot find markers. on another chart when i format data series, patterns, i can edit lines and markers.
Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
I have a macro which refreshes a query when the spreadsheet is opened. This works fine when online.
However, if the user is not online, the query is unable to refresh and the macro just hangs.
Is there a code which will enable me to say " if unable to refresh then move on to the next line"?
here's the code below.
Private Sub Workbook_Open() Sheets("Houselist").Activate Selection.QueryTable.Refresh BackgroundQuery:=False Sheets("Front").Select Range("A1").Select End Sub
