Set Variable To Row & Active Cell Column
I have a sort procedure I have been working on. Sort By Active Cell Column
Now I would like to make sure the row of the activecell.column is row 7. I tried
Private Sub comp_myMonthlyReport_SortAscend()
Dim rng As Range
With ActiveWindow
rng = .ActiveCell(7, .ActiveCell.Column)
End With
Selection.Sort Key1:=rng, _
Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
But I receive this error: Run-time error '91': Object variable or With block variable not set
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Set Variable To Unknown Last Used Cell In Known Column
I'm trying to define the last row in a column which is determined from a find command. It's quite a large sub, and the rest is working properly, so I'll just post the (still rather large) troubling section. 'startingPoint is declared as a range. Destbook, reporttarget and FullControlName all exist. 'this sets StartingPoint to a one cell range in a sheet named from a custom class in a workbook named from variable destbook Set StartingPoint = DestBook.Sheets(ReportTarget.Name).Cells.Find(what:=FullControlName, searchorder:=xlByColumns) WriteCol = StartingPoint.Column 'this changes the range to include the whole column of the existing range Set StartingPoint = Range(StartingPoint.EntireColumn.Address).....................
View Replies!
View Related
Set Range Variable To Last Used Cell In Column
how (if possible) to activate the link between the Excel spreadsheet and the VBA editor, so when I cut/paste row, columns and cells in my spreadsheet, my VBA code is automatically updated. I have a rather large excel tool combined with a significant amount of VB code, and each time I insert/remove a line, I have to re-type the cell references,
View Replies!
View Related
Highlighting Active Cell's Row, Along With Any Row That Shares Same Value In That Column
Is it possible to click on a cell in column C, and have the wishlist below happen: That active cell's row is hightlighted. Any cell in that column that has the same value as active cell is also highlighted. Plus, any cell in another sheet that has that value it's row is highlighted too. Example: I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
View Replies!
View Related
Set Range Variable Using Variable Row Number
I am using a variable named " Totals" as a range type to refference the range in a formula. It works the way I have it. Dim Totals As Range Set Totals = [U37: AE37] Now instead of the absolute refference, I would like to change the row refference by an offset of my current row, using a formula with a varriable. The columns stay the same.
View Replies!
View Related
Pick Data From A Specific Row/column (eg 10/B) Related To Active Cell
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet) what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14. if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
View Replies!
View Related
Variable To Set A Column Range
I am trying to set a range for a for next loop using the result of a find, the location of the find result will always be row 1 but may be in any column after Column D. I have been trying different ways to work out this issue but have failed in all my attempts. I would be very grateful to anyone who can tell me where I am going wrong (I am sure it will be very simple). For Each shtRegisterSheet In ActiveWorkbook. Sheets shtRegisterSheet.Activate Set rngFindBalance = shtRegisterSheet.Range("c1:da1").Find(what:="Balance") dteSaledate = Format(rngFindBalance.Offset(0, -1), "yy") dteYeardate = Format( Date, "yy") If dteSaledate < dteYeardate Then ......................
View Replies!
View Related
Set Variable: Object Variable Or With Block Variable Not Set
I have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set" Sub test() Dim StartRng As Range Dim Buffer As Range Set StartRng = WorkSheets("Sheet1"),Cells(1,1) StartRng.Activate ActiveCell. CurrentRegion.Select Buffer = rngStart.CurrentRegion.Copy ' I also tried the following line of code but that didn't work either 'Set Buffer = rngStart.CurrentRegion.Copy .. ... End Sub
View Replies!
View Related
To Highlight Active Row And Column
I found this code to highlight the active row. I tried to make it highlight the row and column, but I was not successful. What I really need is to highlight the active row and column above and to the left of the active cell, not the entire row and column. For example, if G10 is active, the highlighted cells would be G1:G10 and A10:G10. Private Sub Worksheet_SelectionChange(ByVal Target As Excel. Range) Dim i As Long Cells.Interior.ColorIndex = xlColorIndexNone If Application. CountA(Target.EntireRow) 0 Then i = Target.Row Else For i = Me.UsedRange.Rows.Count To 1 Step -1 If Application.CountA(Me.Rows(i)) 0 Then i = i + 1 Exit For End If Next i End If Rows(i).Interior.ColorIndex = 6 End Sub Also, I have fill colors on the sheet and I just noticed that the code removes those fill colors. I need it to not remove my fill colors. The only fill colors it should remove are ones it previously colored.
View Replies!
View Related
Set Variable To Value Of Cell
how to set a named variable to a value from a cell without using .select on that cell? This is what I tried without success. Set peaktime = activecell.formulaR1C1 = "=RC[-1]" While I get an error when this line attempts to execute, the variable actually has the correct value assigned to it when I mouse over it in debug mode. If I use that exact same line without the 'set', peaktime equals 'false' instead of the value in the corresponding cell.
View Replies!
View Related
Insert Row On Sheet & Move Active Cell Row To It
I would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time. Example: Sheet 1 – is current jobs and sheet 2 is old jobs. My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2. I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
View Replies!
View Related
Insert Row At Active Cell With Formula From Fixed Row
I want to insert a new row that contains the formulas of a fixed row (1:1). The inserted row is changeable and is determined by whichever is the current active cell. Eg: Active cell is something random like E16 I want to add a new row but don't want a blank row - rather want a row that contains the properties of 1:1
View Replies!
View Related
Paste Formula To Specific Row In Active Column
I'm trying create a macro to enter a series of forumula's in a series of rows in whatever column is currently selected (or column which has a cell selected). IE if the active cell is C5 I want "=A1+B1" copied to C10 of it was AA43 selected I'd want "=A1+B1" copied to AA10. Have done this with setting a row as a variable, but whenever I've defined the column as one it comes out as a numeric value. and gives me "method range of object global failed"
View Replies!
View Related
Pass Row Number Of Last Used Column Row To Variable
This line in my code is causing an invalid qualifer error message: lngNew = wsNew. Range("B65536").End(xlUp).Row.Offset(1, 0) Option Explicit Sub Disney_DumpData() Dim wbBook As Workbook Dim wbNew As Workbook Dim ws As Worksheet Dim wsNew As Worksheet Dim rng As Range Dim rngNew As Range Dim rngUnit As Range Dim rngUnitPaste As Range Dim lngNew As Long Dim Cnt As Integer Application. ScreenUpdating = False Application.Calculation = xlCalculationManual Application.DisplayAlerts = False Set wbBook = ThisWorkbook Cnt = 0 'Dump To New File '/Define new workbook Set wbNew = Application.Workbooks.Add.....................
View Replies!
View Related
Set Variable To Named Range Or Single Cell
The problem exists with the lists I use. I have a "settings" sheet, where users can choose from preset values to run in the program. E.g. "Urgent", "Semi Urgent" and "Non Urgent" (there are a lot more values, but those will do for now." and the idea is to run them 1 at a time. However, I've now determined that 99% of the time, they're going to be run 1 after another, that is to say run the program once for "Urgent", then again for "Semi Urgent" and then again for "Non Urgent". So I'd like to loop through these. Again, not a problem, you'd think. So I added a new value to the list; "All" which users can select to invoke a list. Again, not a problem, I already have the list as a named range, "DmgList" and I can cycle through it. I ran the following test code to see if it would work in theory...
View Replies!
View Related
Set Print From First Column To Last Data Row
i need a macro that will set print from A1 to H (last data row) if age entries in col h is >=5, i dont want to print data below this age criteria Over2day CDEFGH6Value DateEntry DateTypeAmountCCYAge71-Oct-075-Dec-08LDR2,203.67USD729819-Nov-075-Dec-08LCR200.00USD680924-Jun-0817-Dec-08SCR2,001.38USD462 Excel tables to the web >> Excel Jeanie HTML 4
View Replies!
View Related
Macro Error Message (object Variable Or With Block Variable Not Set)
When i try to run the code below i get the error message - object variable or with block variable not set- Sub REFRESHXX() 'LIST Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select Selection.AutoFilter Field:=1, Criteria1:="1" 'SET RANGE Dim sFormula1 As String Dim sFormula2 As String Dim sCell1 As String Dim sCell2 As String Dim sSheet1 As String Dim sSheet2 As String Dim r As Range Dim MyRange As Range 'for testing With Sheets("Points") sFormula1 = .Range("CY1").Formula sFormula2 = .Range("CY2").Formula End With 'FORMULA IN R1C1 STYLE strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))" 'ENTER FORMULA IN ALL CELL RANGES r.FormulaR1C1 = strFormula 'REDUCE TO VALUES Dim ar As Range 'an area is a range For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells ar.Value = ar.Value Next ar 'UNLIST Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select Selection.AutoFilter Field:=1 End Sub
View Replies!
View Related
Find Dates Macro: Object Variable With Block Variable Not Set
I found this nice little bit of code for a date range search in column A but it will not work. Apparently i have not set a variable or something. Private Sub Worksheet_SelectionChange(ByVal Target As Range) Dim startDate As String Dim stopDate As String Dim startRow As Integer Dim stopRow As Integer startDate = InputBox("Enter the Start Date: (dd/mm/yyyy)") If startDate = "" Then End stopDate = InputBox("Enter the Stop Date: (dd/mm/yyyy)") If stopDate = "" Then End startDate = Format(startDate, "dd/mm/yyyy") stopDate = Format(stopDate, "dd/mm/yyyy") startRow = Worksheets("sheet1").Columns("A").Find(startDate, _ LookIn:=xlValues, lookat:=xlWhole).Row stopRow = Worksheets("sheet1").Columns("A").Find(stopDate, _ LookIn:=xlValues, lookat:=xlWhole).Row Worksheets("Sheet1").Range("A" & startRow & ":A" & stopRow).Select End Sub
View Replies!
View Related
Run Time Error 91 Object Variable Or With Block Variable Not Set
I am having a lot of trouble finding out why I am getting error. I believe the error is because it can't find the number. In cells C115:C314 i have the numbers 1 to 200 in order. when someone types in 1 to 9 in the text box it works, but on 10 and over i get the error ???? here is the code I have shCalculator.Range("C115:C314").Select Selection.Find(what:=CInt(txtPackageID), After:=ActiveCell, LookIn:=xlValues, LookAt:= _ xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _ , SearchFormat:=False).Select x = ActiveCell.Row shCalculator.Range("ProposedMeter").Value = Cells(x, 7).Value shCalculator.Range("Package").Value = Cells(x, 12).Value shCalculator.Range("ProposedMeterAmount").Value = Cells(x, 30).Value shCalculator.Range("Term").Value = Cells(x, 62).Value shCalculator.Range("Discount").Value = Cells(x, 67).Value shCalculator.Range("Equipment").Value = Cells(x, 72).Value
View Replies!
View Related
Find Method Code: Object Variable Or With Block Variable Not Set
I need my program to: - find the cell containing the string "Datum/Tid" - record the column and the row of the found cell in two variables lCol and lRow Here is my Sub test() Dim rFoundCell As Range Dim lRow As Long Dim lCol As Long 'Find method of VBA Set rFoundCell = Range("A1") Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _ LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, MatchCase:=False) 'for anyof the two lines down I get the message "object variable OR block variable not set" lRow = rFoundCell.Row lCol = rFoundCell.Column End Sub
View Replies!
View Related
Run Time Error 91, Object Variable Or With Block Variable Not Set
Function Find_Range(Find_Item As Variant, _ Search_Range As Range, _ Optional LookIn As Variant, _ Optional LookAt As Variant, _ Optional MatchCase As Boolean) As Range Dim c As Range If IsMissing(LookIn) Then LookIn = xlValues 'xlFormulas If IsMissing(LookAt) Then LookAt = xlPart 'xlWhole If IsMissing(MatchCase) Then MatchCase = False With Search_Range Set c = .Find( _ What:=Find_Item, _ LookIn:=LookIn, _ LookAt:=LookAt, _ SearchOrder:=xlByRows, _ SearchDirection:=xlNext, _ MatchCase:=MatchCase, _ ........................ Using the message box I see that sheet 1 opens but then I receive an error message Run Time Error 91, Object Variable or With Block Variable not set. I tried declaring and using set on "project" but got nowhere. I also need to have a message indicating project not found. Once this part is solved I will loop all of my other workbooks
View Replies!
View Related
2007 Macro: Run-time Error 91:Object Variable Or With Block Variable Not Set
I'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro. But it ends in a Run-time error 91... The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile. Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile. The next target file in the folder is opened and the actions are repeated in this second target file. For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook. The error message i get is: "Run-time error 91:Object variable or with block variable not set." When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.
View Replies!
View Related
Use Value Of Active Cell To Name Row
I'm trying to take the value of a cell and use the value as a name for the row. If cell a1 has value = June. I want to change the name of row 1 to June. I'm not sure what I'm doing wrong with the following code. Sub Name_a_row() ' ' Dim TheName As String Dim RowNum As Integer TheName = ActiveCell.Value RowNum = ActiveCell.Row ActiveWorkbook.Names.Add Name:="TheName", RefersToR1C1:="=Data!R&RowNum"
View Replies!
View Related
Runtime Error 91, Object Variable Or With Block Variable Not Set
This works fine in Excel 07 but when ran in 03 it doesn't work and I get that error message. Sub mcrRefresh2() Sheets("WeeklyData").Range("A1").ListObject.QueryTable.Refresh BackgroundQuery:=False Sheets("WeeklyData").Range("aa1").ListObject.QueryTable.Refresh BackgroundQuery:=False Worksheets("WeeklyPivot").PivotTables("PivotTable1").PivotCache.Refresh End Sub
View Replies!
View Related
Debugging Error: Object Variable Blocked Variable Not Set
I am getting an error at this line: Set rng5 = Range(.Cells(celle2.Row, celle4.Column), .Cells(celle2.Row, celle4.Column)) Sub UpdateNumbers() Dim rng1 As Range Dim rng2 As Range Dim rng3 As Range Dim rng4 As Range Dim celle1 As Range Dim celle2 As Range Dim celle3 As Range Dim celle4 As Range Dim celle5 As Range Dim flag1 As Long Dim flag2 As Long................
View Replies!
View Related
Object Variable Or With Block Variable Not Set Error With Macro
I attempted to modify "macro_1a1ay" to look into the "comments" sheet (column a) for a specific text string. If that text string is found, I have it delete the entire row, then re-sort the page and return to the calling page. It works well as long as it finds something. When it does not find the string (i.e. like now when the page is blank) it gives me the run-time error mentioned above.
View Replies!
View Related
Find Method: Object Variable Or With Block Variable Not Set
I have a spreadsheet form with all kind of values and what I want to do is to find a data in a worksheet named "Config" based on the spreadsheet activecell value. With the find row adress I return data of another column but same row (in the worksheet) in two diferent label captions. If the spreadsheet activecell value it was found in the worksheet everything is ok but if the value is not found I'm getting the message "Object variable or with block variable not set"....
View Replies!
View Related
Variable For Row / Column Selection
I need to create a macro that clears the contents of a range of cells. However, that range of cells is variable. I know my starting cell (C9) and I know the selection goes over to column Z every time but the number of rows I want to clear after that may change. Also, whatever that first cleared range is, I would need to skip the row below it then clear the same number of rows below that. (not entire row of course, just the ones from column C to column Z)
View Replies!
View Related
Use Active Cell For Row Number
There is a chart encompasing column A, B and C. The column D has certain numbers stored in its cells. All I wont is to build a code which would check the value of the cell in column D which is in the same row as the active cell, and then paste certain date into the active cell - basing on the value of the cell in column D. Here an example: Sub pasteif() first one) column D has 'if the value is i.e 2 then it should paste into the active cell whatever there is in Range F1:G1 'if other value is present in this case in cell D1 (it is always the D column) then other range would copied into the active cell Range("F1:G1").Copy ActiveCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
View Replies!
View Related
Highlight Row Of Active Cell
Is it possible to have a specified shading (say 50%) applied to all rows except the currently picked row and the header rows to allow a user to focus on inputting across the row? I'd use this in conjunction with " Move Selection After Enter" to "Right" so the user would stay on the same row. I've tried the Help function, but can't find anything.
View Replies!
View Related
Delete Row Of Active Cell
I have a macro for deleting a row. I want iit to delete the row that I have selected, that is i if I mark cell B22 I want it to delete row 22. But it deletes the row under it, that is 23. Sub Tabortrad() Dim intRadnr As Integer Dim intStartrad As Integer Dim intSlutrad As Integer intRadnr = ActiveCell.Row intStartrad = ActiveSheet.Range("Första").Row + 1 intSlutrad = ActiveSheet.Range("Sista").Row - 2 If intRadnr < intStartrad Or intRadnr >= intSlutrad Then MsgBox "Kan inte radera denna rad. Placera markören på en av bokföringsraderna mellan rad " & intStartrad & " och rad " & intSlutrad - 1 & "." & Chr(13) & "En ny rad kommer att infogas under den rad där markören står.", vbOKOnly, "Felaktig rad markerad".......................
View Replies!
View Related
Range In Same Row As Active Cell
I'm looking for a piece of code, which would activate a certain Range i.e. the start of which would be in column A and the End in Column G. My problem is that the activated range of cells shuld be exactly in the same row as the currently active cell i.e. active cell B3 -> activated range A3:G3 .
View Replies!
View Related
Error: Object Variable Or With Block Variable Not Set
I've set up a userform (frmCoC) to read and write info to the "contractor database". Within that userform is a listview control that reads off a second, "induction database". When the user selects and clicks on one of the displayed entry in listview, another form (frmInd) opens to edit data on the induction database. There's a command button along side the original form (frmCoC) to create a new entry in the induction database. The click event for the button is as follows:
View Replies!
View Related
Error 91 Object Variable Or With Block Variable Not Set
At a high-level: My code fails in the sub-routine that is called (SecondSub). The first line of code on the SecondSub is where I get the Error 91 Object Variable or with block variable not set. 1st Routine: ________________________________________________________ Sub FirstSub() Dim ie As Object, iebody As String, strURL As String, strUsername As String, strPassword As String Dim lRow As Long Dim abc As String Dim striEst As String Dim ele As Object Dim LinkHref As String Dim a As String Dim b As String Dim c As String a = DateAdd("d", -1, Now) b = DateAdd("d", -2, Now) c = DateAdd("d", -3, Now) Set ie = CreateObject("InternetExplorer.Application") strURL = "website" strUsername = "xxxxxxxxxxx" strPassword = "xxxxxxxxxxx" While ie.busy DoEvents Wend......................
View Replies!
View Related
CreateObject: Object Variable Or With Block Variable Not Set
I have my below code which will create a looping "ftp" and "get" effect. However i am having some problems right now. There's always an error that states "Object variable or With block variable not set". Sub File_Transfer_testing() Dim N As Integer Dim Lotid As Variant Dim Tester_array(1 To 15) As String Tester_array(1) = "10.10.10.10" Tester_array(2) = "20.20.20.20" Lotid = InputBox("Input a LOT ID") N = 1 Set fs = CreateObject("Scripting.FileSystemObject") Set A = fs.CreateTextFile("C:script.txt", True) For N = 1 To 2 A.writeline "open " & Tester_array(N) A.writeline "xxx" 'username A.writeline "xxxxxx" 'password A.writeline "cd /zzz/reports" A.writeline "prompt" A.writeline "ascii" A.writeline "mget " & Lotid & "*sorts" 'file to be uploaded A.writeline "quit" A.Close Set fs = CreateObject("Scripting.FileSystemObject") Set A = fs.CreateTextFile("C: upload.bat", True) A.writeline "ftp -s:C:script.txt" 'the ftp site A.Close dRetVal = Shell("C:upload.bat", 0) 'upload the file ''''''''''end upload.bat file Next MsgBox ("Done") End Sub
View Replies!
View Related
Double Lookup (lookup Variable Row And A Variable Column)
I have a file that I would like to lookup variable row and a variable column. I have tired vlookup and hlookup but these do not work because you have to specify a given column or row versus having that column or row be variable. Is there a way to do this. Think of a set of times tables. I would like to input 8 and 9 and get 72 as an output. How could I go about doing this? Or in the attached file, I would like to say A and 15 and get A15.
View Replies!
View Related
|
TRACKER
