Move Cell Value To Another Cell If Another Cell Is Blank
May 27, 2014
Attached is a sample of what I am working with.
For some reason when pulling this report into excel, the description is under the part number and the ordering information is on the line with the part number. What I am trying to do is have the description move up one row and over one column if the value in C is blank on the same row. All of the information should be on one line. This report can have hundreds of records so I need some kind of looping code to get the end product where I need it.
example1.xlsm
View 2 Replies
ADVERTISEMENT
Jun 1, 2014
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies
View Related
Feb 8, 2009
I will be moving to a specific cell - "N1". I'm looking for code that will then scan down from that cell, making the first blank cell the active one.
View 4 Replies
View Related
Jun 10, 2009
VBA to find the next appropriate blank cell in column "A" when copying ranges of varying sizes and pasting them in a new worksheet one after the next.
Currently I have recorded a macro that uses the code below to get to this location, but I am worried this will break when I get new data of a different range size;
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select 'my initial range selection
Selection.Copy
Windows("myfile.csv").Activate
ActiveSheet.Paste
ActiveCell.SpecialCells(xlLastCell).Select 'finds last cell of my paste
Range("N69").Select 'I hit the down arrow once to get to new blank row
Selection.End(xlToLeft).Select 'to go to begining/col A of new row for next paste
I have tried playing around with
ActiveCell.Next
but can't get it to work.
View 3 Replies
View Related
Apr 16, 2009
Trying to pull data from a list and if the cell above is empty then pull the data from the cell below and so on........
I have some code for it..but its just a little bit too long and I can't use it
This is what i have so far, trying to simplify it as its way to long to fit in a singel cell....i did think about breaking it down in to collums of either 8 or 6 and having it in chunks that way...but if i did that then i would still have to eventually use this forumla below as i don't really want huge gaps within the form i'm doing.
View 13 Replies
View Related
Apr 18, 2013
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
View 1 Replies
View Related
Nov 3, 2008
I know this is a sooo basic question but I can not for the life of me remember how.....
when I am on a excel sheet I can not seem to move from quare to square qiththe arrow keys.
It just now takes me all the way to the left or all the way to the right and not from cell to cell from left to right.
I know its something rather simple yet I can not seem to figure this out.
I have no problem with this on 2003pro.
View 6 Replies
View Related
Nov 11, 2008
I require a macro to enable a selected shape to be moved from current cell location to relative position but 1 row up. eg topleft address = A4 and shift shape to topleft address = A3
View 5 Replies
View Related
Dec 12, 2012
I want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN
S33 / 33 - :133/01504 TR
NI101 - :101/915635 T
N101 - :101/915635
View 4 Replies
View Related
Jul 23, 2013
So, I just started checking Excel Macros. I'm working on a quite large data base where I need to search for a given part number and then move N columns to the right and display the text inside that cell on a message box.
Here's what I got 'til now:
Private Sub M0016216_Command_Button_Click()
Cells.Find(What:="M0016216", After:=ActiveCell, LookIn:=xlValues, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
ActiveCell.Select
[Code] ........
View 3 Replies
View Related
May 8, 2009
I have a spreadsheet with details of letters that should be responded to within 20 days, and i want to have a cell showing the amount that that need a response within 10 - 5 days. Basically I want to have a value of one returned to a cell in a row if one cell in that row contains a value between 10 and 5 (less than 11, more than 4) and another cell is blank. For example, AD27 contains 6, k27 is blank. I want AE27 to show 1. I also need the same if the value is less than 5, but i'm sure i could figure out how to alter it.
View 2 Replies
View Related
Nov 19, 2013
I have made a table which contains 2 date columns, Both formatted as date (dd-mmm-yy), the second column is calculated as the first column, + 30, The dates work out fine when adding to a date in the first columns, but from a blank cell it displays 30-Jan-00.
e.g
Started
Finishes
12-Nov-13
12-Dec-13
30-Jan-00
09-Nov-13
09-Dec-13
11-Nov-13
11-Dec-13
Rather than delete the rows with the blanks in the Started column, is there a formula that I can use so that the cells in the "Finishes" column is left blank when the "Started" cells are blank?
The current formula for cells in the "Finished" column is:
=[@Started]+30
View 2 Replies
View Related
Apr 23, 2009
Is it possible to move data within brackets and the brackets themselves from one cell to another?
Eg. Audi A3 (Including S3) all models.
To remove (Including S3) from this cell and place it into another cell?
View 11 Replies
View Related
Dec 30, 2008
exist any function that do following?
I am on the row 100 in column G. I had a freeze the first row where i have hypertext and other function. I want add here (in the 1. row) something like hypertext, but i want to stay in the row where i was.
When i am on row 100 in column G and i want to create function which move my cursor to column W but in the same row (row 100 in this case).
Next time i will be in row 154 and i will want to move my cursor again in column W and use this same hypertext/function or what.
View 11 Replies
View Related
Jul 22, 2014
I have a filtered row that calculates values based on user input. I would like to take the calculated value of a cell in that row and place it as a static value in a different cell.
For example, the filtered row is row 85. The user inputs 5.5%. Cell AK85 calculates the value to be $100,000. Cell AK3 references the original row, which is 3. I would like to take the $100,000 value and place it in cell AK3 but as a static value and not based on a formula.
View 1 Replies
View Related
May 17, 2006
It's difficult to explain, the attached shows the situation better. Basically there's a picture that is somehow linked to a cell. But, you can update the picture or the cell and the other one gets updated.
View 3 Replies
View Related
May 8, 2014
Im currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
=IF( F4 <97, AM4*0.8, IF( F4 >=97, AM4*1.1, IF( F4=" ";" "; AM4)))
View 5 Replies
View Related
Jul 28, 2014
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
View 2 Replies
View Related
Jan 7, 2014
Ok, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
I tried this but it's not working:
=IF(C3="0","",C3-C2)
View 2 Replies
View Related
Jul 8, 2014
I am wanting to have certain cells of data from one worksheet appear on another worksheet once the cells on the first sheet have data entered in them.
I find that I can do a simple formula to copy the cell but I want the cell to remain blank until data is added in the first sheet (it will be a mix of text and numerical entries).
View 4 Replies
View Related
Jan 14, 2013
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
View 8 Replies
View Related
Apr 1, 2014
I am trying to alert our purchasing mgr when order dates are approaching or not meeting our project deadline.
As of now i have the following rulesif order date is due today or past due - redif order date it greater than project date - redif order date is due within 2wks - yellow
Now all I need is a rule where there is an order without a due date but the project deadline is within 2wks (yellow) and past due or due today (red)
KO_04.01.14.xlsx
View 3 Replies
View Related
Mar 24, 2014
I want to get the text inside the cell which is to the left of the first blank cell of a column.
I show the problema in the attach imageSin título.jpg
View 6 Replies
View Related
Oct 22, 2009
The below code is what I have and it works but what I need is for it to loop until it doesn't delete anything. How can this be done?
View 2 Replies
View Related
Feb 26, 2008
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors.
Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View 5 Replies
View Related
Nov 26, 2013
I have 2 worksheets, let's call them "Sheet1" and "sheet2".
Sheet 1 has 2 columns (A, and B)
Ie. "Sheet1:"
Col A, Col B
Red
Green Yes
Blue
Yellow
Orange Yes
For each entry in Column "B" that has a "Yes" value, I need to copy the color value in column "A" into the next available empty cell in "Sheet2" in column A.
"Sheet2"
Col A, Col B
Red 3
Blue 5
Yellow 6
Final Result:
Col A, Col B
Red 3
Blue 5
Yellow 6
Green
Orange
how to do this particular challenge? For Sheet2, I think I'll need a function to determine the first available blank cell in column A.
View 8 Replies
View Related
Dec 24, 2013
I have a formula in cel B1 : =SUM(A2:A100) / A1
I would like to use this formula many times in the sheet, so I would need a reference to the cell the formula is in, and have the SUM range until the next empty cell one column to the left.
So I would need something like (literally):
=SUM(Offset activecell (1,-1) : Offset activecell (1, (look for next empty cell -1)) / Offset activecell (0,-1)
View 3 Replies
View Related
Apr 7, 2009
I have Column A and Column B. Every row in column A is populated, but only some of the rows in column B are populated. I need a formula that copies column A if B is blank. (i.e. If B6 is blank, copy A6). Thoughts?
View 6 Replies
View Related
Dec 10, 2006
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies
View Related
Jan 30, 2007
I need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
View 3 Replies
View Related
