Moving Data Depending On Input

Jul 7, 2009

I new for a forum I have a small problem I just stock and cant see what to do. So i need to move data from 4 columns B,C,D,E to F,G,H,I depending on input in column J, like if in J2 i enter letted M (or any from column A) i need to move data from B12,C13,D13,E13 to F2,G2,H2,I2 and so on. I dont have experiens in programming in exel or using formulas.

View 14 Replies


ADVERTISEMENT

Moving Data From Rows To Columns - Depending On Unique Content In A Field In Column

Jun 24, 2014

I have a worksheet which contains 2 columns which is needed to work my problem.

Unique Work ID and Description

The unique work ID are the same for each description, but there are up to 5 different description associated with each unique work id.

I'm looking for an automated process but where to start to convert the 5 rows in the unique row and 5 column for the descriptions

View 8 Replies View Related

How To Prevent Data From Moving Cells Within The Input Matrix

Apr 4, 2013

I have a worksheet that I will be allowing other to access so that I can get them to input certain data. I will be protecting the sheet to avoid having them inadvertantly overwrite any of my formulae. So, I have a matrix on the left for them to input data into with calculations to the right that they cannot change. Can I prevent them from moving cells within the input matrix

View 1 Replies View Related

Clear Data Depending On User Input And Move Cells Forward Without Deleting Data Table

Oct 25, 2012

I have an month input in cells B2 (user can enter values from 1-5)

I then have a data table that has month 1,2,3,4,5 running across range G9:K9. the data is held in range G10:K19.

So if user types in 4 in B2, what should happen is that months 1,2,3 and 4 the data for these months should be cleared and data in month 5 moves forward into month 1.

So basically, anything left of the month entered is B2 should be cleared and replaced with anything right of the month in B2.

1
2
3
4
5

£11
£133
£29
£193
£100

[Code] ........

View 3 Replies View Related

Generate Table On Another Sheet Depending On Input Data?

Apr 15, 2014

I am tracking business hours of various business locations. I would like to be able to enter the businesses operating hours on the "overview sheet" and, based on those hours, have a table generated on another sheet that "autofills" based on the date entered on the "overview sheet". For example:

I would enter the operating hours of the business on the "overview sheet" and it would look something like this:

Day
Open
Close

[Code]....

I want a table for each day created. I would then manually enter the data for the "Ranking" column. The issue is that I have numerous location I want to do this for and all with varying hours of operation. It is very tedious to manually create the tables.

View 9 Replies View Related

Must Input Before Moving On

Mar 4, 2008

i have a spreadsheet model that i have inherited that needs some rigour. currently, users are inputting the bare minimum and then running away with calculation errors all over the page. I want to be able to "force" them to fill in certain fields before allowing them to move on. Eventually, I will do this via a User Form but until then, I need something to help my lovely users along in the right direction.

So, if a user inputs a project name (say G15), they will have to also enter Project Type (I15) and Start Date (K15).

while I am here, I want to be able to have the Project Status show as Potential if the Start Date is in the future. I already have validation set to limit the user choices to "Current,Completed,Suspended,Potential,Cancelled". I am not sure how to get the validation list to be contingent on the start date.

and lastly, does anybody have a little piece of code that will make the Start Date show as the day that the Project Status was changed to Current? So, even if the Start Date was initially a few weeks away, if Status is changed to Current tomorrow, the Start Date should be overwritten with tomorrows date.

View 9 Replies View Related

Moving Average Input Range Display

Mar 30, 2007

I am using the built in moving average function to calculate the moving average of a set of numbers. There are a few things that i would like to do.

First i would like to have the last result displayed in a single cell. Then next to that cell i would like to have a cell that would specify the period of the moving average. I would like to be able to change the period in that cell and have that change it in the actual function. And finally i would like to have the moving average in a chart that would also change its period once that is changed in the respective cell. I realize that this might need some VB coding which i am currently learning.

View 14 Replies View Related

Moving Rows Based On Input Of Date?

Jun 17, 2014

I am a production manager for a homebuilder and I am trying to create an Excel spreadsheet that will allow me to input a date in a column and have a second column dependant on the date and move as I change the date.

Since no work is done on weekends, I'd like the output column to skip weekends and move the input to the next available weekday. I have conditionally formatted the date to be a red fill as a visual cue but I'm not sure where to go from here.

View 7 Replies View Related

Restrict Cells Depending On Input In Another Cell?

Jan 28, 2013

I have two cells, A1 = Yes/No and B1 = Date. I want to restrict someone inputting a date into B1 until A1 is marked as Yes...? I've tried data validation, but seem to be hitting a wall with it...

View 2 Replies View Related

Distribute Values To Cells Depending On The Input Value

Feb 25, 2009

I would like to distribute values in cells depending on the input value (excel file attached). This file is a test and basically i've been entering the data manualy. The format is flexible, so it can be reorganisaed.

View 2 Replies View Related

Transfer Info From One Sheet To Another Depending On Cell Input

Jun 26, 2012

I am wanting to transfer data from one sheet to another depending on cell input

Example:

If I enter "2" in sheet1 cell B1, then I want a macro to take A1 to sheet2 but place it in A1 & A2.
Then say I enter "1" in sheet1 cell B2 goto sheet2 and put A2 into A3 and so on.

Depending on the number entered on sheet1 column B, the Macro duplicates the info from Column A in that row into column A on sheet2. ??

View 5 Replies View Related

Automatically Copying Rows From One Sheet To Another Depending On A Cells Input

Jun 2, 2009

i have a certain column that tells me if a client has withdrawn from the company, and the column just says "y" or "n" i want excel to automatically copy the whole row to another sheet if that cell is a "y" for yes the client withdrew...

View 9 Replies View Related

Excel 2010 :: Convert Multiple Columns To Rows Depending On Input Value

Jul 6, 2014

I have lot of data in Excel 2010 which I wish to bring in Columns using a Macro depending on the input value which the macro should prompt me. For E.g.:

A1B1C1D1E1F1G1H1I1J1
12345678910
12345678910
12345678910
12345678910
12345678910

If I select data from A1 and J1 (in practical it will be more Columns) the Macro should prompt me how many Columns would be the output on Master Sheet. If the input is 2 then it should create an output Sheet "Master" and should show the following result

A1B1
12
12
12
12
12
34
34
34
34
34
56
56
56
56
56
.. ..
.. ..

It after selection I run the macro and input 3 then the output should go in three columns (A1,B1,C1) one below other. If 4 is Input then 4 Columns (A1,B1,C1,D1) will come below each other so on and so forth.

View 6 Replies View Related

Combine Two Tables Which Change In Rows Depending On Input Of User Using VBA In Excel?

Apr 13, 2014

i have a macro which takes the results generated and puts them into a table and filters the data so that zeros does not show and arranges the table from largest to smallest. Now i have a problem where i need to select the power, fuel oil consumption, weight and area from one table and the other power, fuel oil consumption, weight and area from the other table and combine them together so that i can have all possible combinations of the data, but i don't want the zeros to show in the combinations. i need the combined data to show on a separate sheet. The data of table 1 varies with rows as shown:

The Data of Table 2 varies with rows as shown:

I would like to achieve a result like this in the following columns and rows without having to input them manually:

View 1 Replies View Related

Moving And Deleting Entire Rows Between Tabs In Workbook And Moving Them Back If Needed

Sep 23, 2013

I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.

View 5 Replies View Related

Excel 2007 :: Moving Data From One Worksheet To Another Keeping Data And Formatting?

May 5, 2014

I am working on a project that has 5 worksheets. I have been able to figure out everything else I need to do but this has me stumped. I have data in Sheet1 A6, that i want to place in Sheet2 A6, Sheet3 A6, Sheet4 A6 and Sheet5 A6 and keep data and formatting(BOLD AND UNDERLINE). So I change Sheet1 A6 and the other 4 sheets change also. I'm using Microsoft Excel 2007.

View 1 Replies View Related

Insert Formula Depending On Cells Depending Of Variables?

Jan 27, 2014

In a macro I want to automatically insert a formula in several cells. The formula depends on other cells, and I want to be able to manipulate these cells with variables. Here is my code:

[Code] .....

All my variables are declared:

Sheets("DATOS YTD 2014").Cells(I, Semana + 1) is the cell I want to be able to chose due to the variables
Sheets("DATOS YTD 2014").Cells(I, 3) is the reference cell for the VLOOKUP formula, that will vary with I
SheetMonth.Range("B3:W172") is a range in the sheet SheetMonth which is fixed

The error message I receive is the following: "Run-time error 13, Type mismatch"

I precise that the next step is to make the ",6," part in the vlookup formula also variable... but I guess once my current issue is solved this one will be a piece of cake.

View 3 Replies View Related

Data Validation Rules Not Moving With Data

Feb 24, 2014

creating a spreadsheet for work which is almost working a treat Unfortunately, when a row of data moves from one sheet (Queries) to another (Archive), data validation is lost. Initially I thought I daidn't have it set up on the Archive sheet, but on moving it back to queries (by use of a macro) the validation is still not working. how to keep validation rules WITH data when it is moved please? I will upload my file when I get home from work....network restrictions prevent me doing it here!

View 8 Replies View Related

Moving Rows Of Data Into 1 Row

May 20, 2014

I'm essentially getting a lot of data at the moment, which has a few orders people have made on my website.

Essentially, think order id, address etc and then all the products the customer has ordered.

However, the part which includes what the customer has ordered creates multiple rows of data, with the order ids etc duplicated. What I need to do is consolidate this into 1 row. So to add additional columns instead of rows.

The reason fro this is I want to mail merge the data into an invoice and mail merges work of 1 line of data at a time. I've attached an example, any way to do this?

(Attached to this post / or linked here: [URL] ....)

View 1 Replies View Related

Moving Data To Another Cell

Dec 11, 2009

I have 3 columns Z, AA, AB. The heading for Z1 is A, AA1 is B and AB1 is C
In column Z2:Z2000, there is a mix of A, Bs and Cs. I want A to stay in Z1 column, Bs to goto AA1 and Cs to goto AB1, also I want this added to a macro that I previously created, so everything happens with one push of a button

Now for save, not sure if this is possible or not, if I can have this added to the macro as well that would be great. When I push my macro button, the file saves to Dec (todays date) DB (81).xls The number 81 is the total count of A, Bs Cs, this # will change depending on how may A, Bs and Cs there are. I really hope there is a way of doing all this

BEFORE

A B C
B
A
A
B
C
C
C
A
A
B
C

SHOULD LOOK LIKE THIS

AFTER
A----B-----C
----- B.....

View 4 Replies View Related

Moving A Row Of Data Into One Cell

Dec 13, 2012

Essentially, there are two columns I am dealing with. One is "Sales Rep" and it lists all of the sales reps employed by the company. The other is "Zip Code" and that will list all of the zip codes that sales rep is responsible for.

Now, I have a row of data, all of those zip codes listed out, that each rep is responsible for, but my supervisor wants all of the zip codes listed in one cell, in that second column. Example: (02018, 34098, 16711).

The commas are not necessary, but is there any way to get this done other than manually entering them?

View 6 Replies View Related

Moving Data With VB Code

Jul 24, 2007

I have a workbook with 5 Tabs. One of these tabs is "Completed" (for completed work) The other tabs are names of Managers and the tabs contain information about who is doing what work for the Manager and information about it.

What i would like to do is in column F on every sheet is the "status". I would like when the "status" is changed to completed, to have VB code move that entire record to the Completed tab.

I think its possible i just don't know how to do it.

View 14 Replies View Related

Macro For Moving Data

Sep 1, 2007

I need to move a lot of data from what was originally a txt document into an easily readable form.

I have used Macro's before but only for very basic routines (so please treat me as a bit dumb when it comes to Macros).

I have Include Screen shot of the data highlighted in a colored box and the relevant colored cell I need to move it into.

This needs to be repeated many times with data that is consistent in its layout.

View 12 Replies View Related

Moving Matching Data Into The Same Row From Different Ones

Jul 21, 2009

what im basically trying to do here is to move XYZ from column B and 123 from column C to match up with XYZ in column A ....

View 7 Replies View Related

Moving Data Between Two Userforms

Aug 6, 2009

I am trying to do what I have quoted below. In particular,I have the two userforms set up so that I open one and then click a checkbox that opens the second userform. I would like the data I enter into a texbox in the second userform to populate a text box in the first.


Originally Posted by dominicb
Good evening scott92

Sounds like you want to dump the contents of textbox1 into a public variable and force textbox 2 to pick them up from there. You might have a problem deciding exactly when textbox2 is to update - ie what event you're going to hang it from. Are both userforms visible on the screen at the same time? is the updating to take place in real time?

HTH
DominicB

View 5 Replies View Related

Moving Data From Spreadsheet A To B?

Jan 31, 2012

i need to move data from a speadsheet (that is open) to

P:SharedAgentsAdmin TeamAvrils TeamSamuel Kinver-WrigleyEscalations ManagementSIOXTeamNew SIOX beastFOR GRAPH PURPOSES.xls

So all the data in the open workbook is in a sheet called "move sheet".

So first to move:

A1:D13 to the workbook address above in sheet "admin" but it needs to look for the next available row in col. A to paste the data.

then

A15:D27 to the workbook address above in sheet "Outgoing (Cust.)" but it needs to look for the next available row in col. A to paste the data.

View 5 Replies View Related

Moving Data From One Sheet To Another

Jul 11, 2012

What vba code would I use to move data from rows a and b in sheet 1 to sheet 2. preferably with a button if possible.

View 2 Replies View Related

Moving Data From One Workbook To Another

Jan 18, 2014

I have two workbooks and wish to extract data from the first workbook (second tab), and insert certain cell data into a specific cell in the second workbook (first tab).

The first workbook has this info:
SN
SN
Sort
P/N
Removal
Customer 1
Customer 2
Program
Rec Month

ABCD1234
D1234
1234567899
Scheduled
Customer A
Customer B
Block 10
Nov-13

[Code] .......

This is a very large data set. The S/N will appear multiple times. The rest of the data will change with each entry, but there are some exceptions where it may be the same.

The second workbook has this data:
ID
S/N
A
B
P/N
Born-on-Date
Date Rec
Ship Date
Customer 1

123456
ABCD1234
1 thru 14
Yes or No
1234567899
03/10/2007
11/07/2013
11/22/2013
Customer A

[Code] .......

This too is a very large data set. What I need to do is to find the S/N in the first table "based on the month" and replace the entry under Customer 1 with the associated Customer 2 data entry. The VLOOKUP function can't seem to handle the multiple S/N entries.

View 1 Replies View Related

Moving Data In A Database

Mar 15, 2007

I've "lurked" around the board for a few days now, and I've gotta say this is the most helpful excel forum by far. After wading through a tiny chunk of the thousands of threads on this board, though, I am still having trouble with coding a macro that will do what I need it to do. If it affects anything, I'm on Excel 2002 on Windows XP.

I am currently in a project where I have to go through a database, formatted as thus: ...

View 9 Replies View Related

Moving Data To A New Cell.

Apr 12, 2007

I have cut and pasted a large amount of data onto a spreadsheet. The problem is that I have two rows of data that is associated with one another, so lets say A1 has a name and A2 contains that person's age. This process repeats in the same way in A3 and A4 and so on.

I need to move the data from A2 to B1 without using a simple function like =A2 in B1. The reason is that I will need to sort just the Names in column A once I get the the data moved. I am not sure how to do this.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved