I was wondering if i can cut & paste rows to a different worksheet ("sheet2") based on a criteria my current loop is as follow need filling in the code below for if then ..
Sub moving()
Dim x As Integer
x = 0
Do While x < 12
x = x + 1
Cells(x, 4) = ""
Do While Cells(x, 4) = "absent"
If Cells(x, 4) = "absent" Then .....
I have an excel workbook with 5 sheets, the first called 'data drop sheet' & the others called 'Louise', 'Thor', 'Peter' & 'Steve'. In the data drop sheet, the first row is header data and underneath (A2 onwards) are rows of data that I have cut & pasted in. The first column (A) of this data will be the person's name, e.g. Louise Wilson.
I want to be able to move the rows for each person to their respective sheets, starting from row 2 as the first is a header. So, for example, if 'data drop sheet' cell A2 says Steve Brady, I want it to copy the whole line to sheet 'Steve' row 2 etc.
My knowledge of Excel is quite basic, so i had little luck searching for this one.
We have a main data sheet in which everything is inputted, but i would like that data to be split up and reported (copied into) in 2 or 3 other sheets, depending on a single criteria.
Is this able to be done so these 'report' sheet are constantly updated, and the columns in the reports dont include irrelavant columns which are in the main data sheet.
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I have data as follows:
id | name
0 | axe
1 | sword
3 | pencil
4 | fist
5 | hammer
7 | gun
9 | rifle
Is it possible to move the rows to the row# shown in the ID?
- e.g. pencil gets moved from row#2 to row#3
I am a production manager for a homebuilder and I am trying to create an Excel spreadsheet that will allow me to input a date in a column and have a second column dependant on the date and move as I change the date.
Since no work is done on weekends, I'd like the output column to skip weekends and move the input to the next available weekday. I have conditionally formatted the date to be a red fill as a visual cue but I'm not sure where to go from here.
I would like to make a macro that will move rows from one worksheet to another worksheet.
I have an excel spreadsheet with multiple columns and rows, within one of the columns there is some text that refers to SOS or County, I need to move everything that has SOS to another worksheet title UCC SOS and everything that has county to be moved to another worksheet title UCC County. Here is a sampling of the worksheet
Account
Primary Borrower
Corp
Status
[Code]....
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies View RelatedI am trying to run (or loop) through a column of cells, and if cell contains certain text (e.g. ALPHA, BRAVO, CHARLIE) and delete the row if found.
My macro as I run it:
Sub DATA_TEXT ()
'Number of cells to loop through (I am unsure how the .xlend works!)
For i = 1 to 2500
'If function defining the criteria.
If cells (1, i) = "ALPHA" OR "BRAVO" OR "CHARLIE" Then
[Code] .....
i had a database from which i need to extract data from COlUMN B, select the
View 2 Replies View RelatedI'm okay with Excel, but I'm just getting into utilizing VBA and I've been searching high and low for a simple VBA code that will remove/delete rows based off a single criteria without loop as there are over 40,000 rows. I tried a couple that I found onilne, and adapting them to my criteria range, but no luck. (All the ones that I found that work use loop and it takes about 15 mins to run through the entire spreadsheet)
I would like to maintain my first row as it's my headers. My single criteria is to remove all rows that have "NO" in column D.
I have a piece of code that put a check in all checkbox in column B from row 5 to row 50 but in column C, I have data from row 5 to 38. I want the macro to stop at row 38 in column B. When the cell in column C is empty stop putting checks in column B. How can I make this macro Check all checkbox down column B and stop when column C is empty. How do I add a loop to stop when the cell in column C is empty?
Private Sub CommandButton1_Click()
Dim CB As Variant
For Each CB In ActiveSheet.CheckBoxes
CB.Value = False
Next
End Sub.......
I looking for a macro that will go through multiple sheets & change specific cells to values if the column header is = to value set in specific cell.
for example
I would like the macro to look at row 3 in each tab (page 1, page 2, page 3) and if the value you is equal to X (parameter input on different sheet) then change the formula to a value in row 6 & row 12 of that column.
I'm attaching an simple example that i looking for this on. The green cells are the one i would like to change to a value.
Book1.xlsx
My code is working with respect to finding the right data, but it keeps overwriting itself on each loop through...I need it to copy/paste and then on the next loop, move down one cell...
[Code] .......
This sheet has A:K columns and 1:3212 rows. There are 'page headers' that are in the text file that I want to delete (the text file was exported from an AS400 program). The first row that starts the page header has SA341 in column 1. Each page header has 5 rows. I used this code from one of the other threads on deleting rows, but I obviously do not understand the code as it deleted all rows that contained SA341.
Sub DeleteRows()
Column_To_Check = 1
Start_Row = 1
End_Row = ActiveSheet. Cells(Rows.Count, Column_To_Check).End(xlUp).Row
MsgBox End_Row
Search_String = "SA341"
For Row_Counter = End_Row To Start_Row Step -1
If ActiveSheet.Cells(Row_Counter, Column_To_Check).Value < SA341 > Search_String Then
ActiveSheet.Rows(Row_Counter).Delete
End If
Next Row_Counter
End Sub
in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.
here is the macro that moves the data.
Sub movedata()
Range("A1:H1").Select
Selection.Copy
Sheets("Sheet2").Select
ActiveSheet.Paste
Sheets("Sheet1").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Range("A1").Select
Sheets("Sheet2").Select
Rows("1:1").Select
Selection.Insert Shift:=xlDown
Range("A1").Select
Sheets("Sheet1").Select
End Sub
There are two workseets involved. Inventory is the main and Pending is the second. There are 28 columns of data in each that match based on row 1 headers. I need to figure out how to cut all the rows with "Pend" listed in Inventory column Z to one row below the data in column A of the Pending worksheet. The data can be dates and also notes but no matter what is in column Z it must be cut and moved.
View 6 Replies View RelatedI have a column with dates (dd.mm.yy) and I have a column with names. Moreover, several dates and names are repeated. What is needed, is to delete all the rows in which the difference between dates is smaller than 1825 days (5years) for the same name. (Namely, if I have three rows 01.01.1996 - "A"; 01.01.2002 - "A" ; 01.01.2005 - "A" I want all the rows with "A" to be deleted)
View 5 Replies View RelatedI have a sheet with say 1000+ rows that is a QA report of possible mistakes found in a employee rostering tool.
The report finds all occurrences where the staff member only has one coffee break rather than the two they are entitled to. However, on days where they have training, or other half day commitments, on of the coffee breaks is not entered into out tool. This means we are getting a whole lot of entries that we do not require(i.e. one coffee break error).
The tool uses icons but the cells do have a single unique character under each icon type. For example, the coffee break cells have a "T" and training cells have a "&" underneath the icon (without quotes). The staff members day is separated into 15 minute blocks and each block occupies a cell in a column. This means each staff members day spans many columns in a row (i.e. C=8am, D=8:15am, E=8:30am etc...).
What I have been trying to accomplish is to create a macro in VB code that will locate any row with both a "T and a "&" and delete it. This will eliminate occurrences that we are aware of and leave only genuine errors. There are other combination's that I would like to include also such as:
"T" "["
"T" "#"
"T" "@"
"T" "]"
The first row is headers and the first two columns contain team names and staff names which I am trying to exclude (because names contains "T"'s ).
I have spent many hours now looking for example code on Google, this forum and other forums, however most of the examples I have found are looking for two criteria within a column or specific criteria that is not suitable to my application (i.e. values <> certain numbers etc...).
What am I doing wrong here?
I have a code and it doesn't error out, but it won't hide the rows either. I'm pretty sure the red is what needs to be altered. I've tried adding "Selection.", "Rows." and "Cells." and none of them are working.
I had a raw data sheet in which i need to prepare a statement just like the attached worksheet.
My requirement is to delete all those rows in the department column except the department which starts with "C" Just like "CNN" & "CNN-IN".
Rows with data containing the words starting with "CNN" should not be deleted .The rows can contain words with "CNN" or "CNN*"(here * denotes anything after the word CNN)
I had just formatted the whole worksheet for easy reference.Actually the raw data is extracted from other program which is very clumsy & irregular.
The department column might be in any column.
I've got two worksheets. One contains data from a query, the other worksheet should count rows in the queryresults based on two criteria. See example.
I tried doing it with sumproduct in the normal variant and the array-variant...
I am stuck with a task.
I need to hide all rows in a worksheet except the rows which contain the word which the user inputs through find (CTR+F).
The input word should be captured in a variable and this should be searched in all rows & hide all other rows in the sheet which does not contain this word.
I have this excel file where I every day have over 10.000 rows. I have 2 sheets, one called "Data" and once called "Include list".
The Data sheet contains a list of all of our customers and their customer IDs. The Include list sheet should contain the Customer ids which I want to keep in the Data sheet.
So what I have done is to loop through the Data sheet. If you are in the Include list sheet you should not be deleted fromt he Data sheet. If you are not then the row should be deleted.
I have actually done this and it works but the problem is it take a lot of time to run. I tested in earlier today and I had to break it after 20 minutes which is way too long for our users to wait.
This is the code I wrote:
Sub Include()
Dim FindString As String
Dim Rng As Range
Dim RowNr As String
Dim Lookup_x As String
Application.ScreenUpdating = False
[Code] ........
So my question is, is there any other way to speed this process up? The ScreenUpdating part I have tried but it didnt really speed it up as much.
I have a very large spreadsheet (>10,000 rows) of data. I did Conditional Formatting based on duplicate values for the serial numbers column (B) and then sorted to "Put Selected Cell Color on top". Next I did a sort by the Last Scan Date column M (Oldest to New). The date/time format appears as follows
I used the following macro to delete rows with duplicate serial numbers but retain the row that has the newest time stamp. When I run my macro it's doing the opposite where it deletes rows with the newest time stamp and retains the oldest time stamp.
Code:
Sub Test()
'for Macro to Delete Duplicate Rows and Retain Unique Value
Dim LR As Long
[Code].....
Is there a vba code that can delete the entire row based on two criterias? If a row has a location of Canada and is a female, then delete the entire row.
Name Location Gender
Alan Mexico Male
Dick USA Male
Sharon Canada Female <-- This will be deleted if based on criteria
Mike Canada Male
I am a pharmacist that runs reports and I need to sort and exclude data
It is in Excel 2003 format
I run a report that includes a patients name in one column, the medications name in another column and if the medication was withdrawn, wasted, returned or restocked in another column. Withdrawn, wasted, returned or restocked are treated as different functions and each have their own row entry. Patient and medication name are the same in all situations
I need a macro that will look at the patients name and medication name, see if it is the same and delete all rows that have a withdrawal with an associated wasted, returned or restocked.
Cell a1:a3000 contains a lot of trackingnumbers. Cell b1:b3000 I have a "IF" formulas in place to write "ok" if part of the data in "column A" matches my criteria. What i need is a macro that will cut all the rows showing "OK" in column B from "sheet1" to the next availible row in "sheet2"
I have tried converting copy macros to Cut macros, but thye have not worked. I am rather hopeless for the coding part and mostly make macros based on the record feature. Also looked at the ones that have been showed here, but my skills do not make me able to change them to fit my excel sheet. About 8000 rows with data is added into this sheet everyday and the criteria is not always present. That means on some days there will be no "OK" showing in column B
How can I extract rows from one sheet into another, based on certain criteria?
View 1 Replies View RelatedI have been struggling to setup these two workbooks for a bit now, and I can't for the life of me figure out a formula to do what I need to do. Essentially, I have one workbook that contains a list of purchase records for my company, sortable by Date, Vendor, Price, etc. and one workbook that has a sheet for every vendor. What I need is a formula that will search column B for a vendor, Allied Waste for example, and transfer all the information within the rows for every instance that vendor is found to the new workbook.
This is basically just a way where I can input information once in one workbook, where the sheets are divided by month, and the info will automatically transfer to another workbook, where the sheets are divided by vendor.