Msg Box Needed For Cell Value In Range

Jul 31, 2009

I am trying to get a MsgBox to appear if the cell value within a given range exceeds a certain number value in my case "8". The only issue I am experiencing is that the code seems to take into account any input from any cell, not just the range specified, and additionally since there are 7 columns in the range the MSgBox pops up 7 times, and I need it only once and if the cell value exceeds "8" only when input.

ideally i would like to do a named range as there as there is a block of data where this will need to repeat.

Private Sub Worksheet_Change(ByVal Target As Range)

Dim cell As Range

With ActiveSheet
For Each cell In Range("J40:P40")

If cell.Value [A35].Value Then
MsgBox "Red Cell cannot exceed 8 hours per shift. Please correct this."
End If
Else

End If
Next
End With
End Sub

View 9 Replies


ADVERTISEMENT

Excel 2010 :: If Statement With Text As Range Of Values And Numbers Needed As Output?

Apr 23, 2013

Excel 2010, I have the following list (showing part of it):

Name
T-Shirt Sizes
Nathan
S

[Code]....

The aim of the list is to see what Sizes each and every person needs and then count how many T-Shirts are required for that particular size. The list is over a 100 entries long so counting it manually isn't really an option as it's time consuming as well as errors might arise.

Thus, I've been trying to use the IF statement with the following logic but to as no avail

IF Size in Column is XS
Add 1 to a particular Cell
IF Size in Colum is S
Add 1 to a particular Different Cell

and so on for the other sizes...kind of like a counter for a for-do-loop.

View 2 Replies View Related

Formula Needed To Format A Cell When Its Value Is 0.2 Less Than The Cell To The Left

Apr 27, 2009

Is it possible to do the following?

if cell A1 = 6 and cell A2 =5.8 (0.2 below A1) colour cell A2 orange

if cell A1 = 6 and cell A2 =5.5 or below (0.5 or more below A1) colour cell A2 red

if cell A1 = 6 and cell A2 =6.2 / 6.5 / 6.8 (0.2/0.5/0.8 above A1) colour cell A2 green

if cell A1 = 6 and cell A2 =7.2 or above (1.2 or above A1) colour cell A2 green

View 9 Replies View Related

Needed Function To Display Filename In A Cell

Aug 1, 2008

I am running excel 2003 and I am looking for a function that will display the filename or part of the file name in a cell. I know you can do this as part of a header or footer but is there anyway to have an individual cell display the file name of the document?

View 9 Replies View Related

Finding The Min Number Needed, For Bottom Cell To Be Greater Than Top?

Mar 17, 2009

Hi, sorry for posting this twice but i wasn't sure which category it fell under!

I have a slight problem with excel and and was wondering if anyone can help.

I have 3 columns, A, B, C: .....

View 14 Replies View Related

Macro Needed To Fill Down Other Cell Base On Condition

Apr 8, 2009

I have accounts that I need to compare to see if they exist on my system the account that has a listed date, exist on my system then if I can fill the dates in the accounts the match then I will be able to delete the other accounts that don’t have a date see attach file for more understanding.

View 2 Replies View Related

Simple Macro For Dividing Cell Content By 100 Needed

Dec 14, 2006

I'm only starting to get into the Macro side of excel, and I've created a couple of macros to automatically format cell contents and the like.
However I'm having trouble trying to divide some cell contents by 100.

I have 2 files I'm working with, one contains information regarding cd's and percentages, however the percentages in this file cannot be formatted to percentages (so the powers that be say) for whatever reason.
I copy all this information into another file which does have the percentages formatted as percentages, the result is that the values get multiplied by 100.

So values that read:
100
50
50.25

for example, appear on the new sheet as:
10000%
50000%
5025%

Is it possible to write a macro that will divide these percentages by 100 so the read correctly as:
100%
50%
50.25%

the macro will have to work on selected ranges.

View 9 Replies View Related

VBA Macro Needed For Auto Fill Using Another Cell Reference

Apr 28, 2009

Is there anyone who can suggest a solution to my problem below ?
Basically, what I need is a macro which would ideally work like this:

if D32 = 1, then the background colour of D4 should be red
if D32 = 2, then the background colour of D4 should be orange
if D32 = 3, then the background colour of D4 should be yellow
if D32 = 4, then the background colour of D4 should be green

And then I plan to use it for columns E, F, G

View 9 Replies View Related

Collect Date & Output To Cell In Needed Format

May 2, 2008

I have created a standard input box for the date (UK)

datereceived = InputBox("Please enter the DATE the text message was received, please enter in format DD/MM/YY", , Date)
Sheet1. Range("e" & x).Value = datereceived

I have formatted the cells for row 'E' for 'Date' and DD/MM/YYYY in English UK, But when I have inputted the date into the input box ( e.g. 01/05/2008 ), it inputs into the spreadsheet 05/01/2008 (American Obviously),

View 5 Replies View Related

VBA Macro Code Needed To Run The Code Contained Within A Cell

Dec 17, 2008

I have a macro that, when run, needs to read the contents of cell B5, and run the code that it contains.

Cell B5, for example, would contain the text:
Range("B13").Formula = "SUM(D12:D14)"

I need a macro to "execute this code", as if it were in the macro itself.

I have assigned the above to a variable, but am not sure how to execute it.

EG.


Dim the_calc
the_calc = Range("B5").value

Now, how do I run the_calc ?

View 9 Replies View Related

Joining Two Datasets Together (VBA Needed?)

Jun 19, 2014

So I have two sets of data, I've attached a worksheet which has them both. The datasets have different intervals, but I need to drag "Colour" from Data2 into Data1 and associate it with the correct interval. Sometimes the intervals match up and sometimes they don't - which could be a problem, but as long as its within a small spread it's fine. The "Colour" column in Data1 is filled with my desired result, the source being Data2.

ManyToMany_Example.xlsx

View 3 Replies View Related

TOC Or Index Needed For Workbooks Only

Sep 13, 2008

way to take 18 different workbooks, each containing the same 5 worksheets, and create a TOC that reference the workbook name only.

For Example, I would like to have one workbook with the first worksheet as an index or a table of contents that lists the name of 18 workbooks. When I hover my cursor over the name of a particular workbook in the index or TOC, it will open that workbook where I can now view 5 worksheets of that workbook.

Each workbook will contain the same 5 worksheets.

I am using excel 2002

View 9 Replies View Related

Formula Needed That Changes According To A Specific Day

Oct 12, 2008

I'm trying to make a spreadsheet for work so when im not there they can just enter the day for example sunday and what they have and then it will show them what they need to prep

View 4 Replies View Related

Formula To Sum If 2 Different Factors Are Needed

Apr 9, 2014

I have a big list with names, money spent and date. I need somehow with a formula to do:

Take all the money spent on some specific day from a specific person an put it into a field.. and this for every date of the week and for everyname... Im gonna upload a photo.

Name
Money

Date

Daniel
5

01.03.2014

[Code] ........

I need the list of the left to produce me list of the right somehow, at least just the sum of everything spent everyday.

View 7 Replies View Related

UDF Needed To Get Correct Data

Jul 3, 2014

I need identifying correct title and corresponding company name. For this I need a UDF which looks for first occurrence of title having event or marketing or meeting word in data and if found the remove other titles and company names already separated with "/".

Sample Data
Producer, Target BTC@Periscope/Events Manager, Recognition Events@Minneapolis Park & Recreation Board/Event Producer@Events by JLS

Required Result
Events Manager, Recognition Events@Minneapolis Park & Recreation Board

Sample Data 2
Sales Associate@Teavana/Event Assistant@City of Saint Paul

Required Result 2
Event Assistant@City of Saint Paul

Sample Data 3
Sales and Catering Manager@Bunker Hills Golf Course at Town & Country Caterers/Marketing Coordinator@Town & Country Caterers

Required Result 3
Marketing Coordinator@Town & Country Caterers

View 3 Replies View Related

Calculator Needed For Data Between Ranges

Jul 9, 2014

See the screen shot I have attached: ramp rate.jpg

Basically I have to trawl through tonnes of data every day and I would like an automatic way to do it for me. I am calculating the ramp up rate on an Autoclave oven so these figures are temperatures.

I have various ranges for each section of a cure cycle so I will use this one example.....

I need to calcuate the ramp up rate between 115°C and 140°C

I need to find the min and max between 115°c and 140°c then count the cells within the min and max, minus the min from the max then divide by how many cells there are inbetween

(MAX-MIN)/CELL COUNT BETWEEN THE TWO

Is this possible?

View 3 Replies View Related

Exact Values Needed In InputBox

Jan 16, 2007

When I click a command button an InputBox pops up asking me to enter a set of initials. When I enter the initials and click OK all of the rows with the initials in column 'H' are transfered to another worksheet. However if I was searching for say the initials 'AP' and I only entered 'A' and clicked OK, it will still transfer all the corresponding data with an 'A' in column 'H'.

In other words I want the data that is entered into the inputbox to be exact or nothing gets transfered.

View 9 Replies View Related

Web Address Needed For Excel File

Apr 25, 2013

I want to create a web address for the attached file and then post the link on my football forum so that members can view the file in their browsers. Is it possible to do this?

Attached File : Book1.xlsx‎

View 2 Replies View Related

Delete Sheets Macro Needed!

Jan 31, 2009

I have a macro on: Sheet101 (DAY 1) that adds additional sheets.
Example: When I click active button it will add Sheet102 (DAY 2) & can add up to Sheet130 (DAY 30)

I want a macro that will delete any of the sheets added from Sheet130 (DAY 30) to Sheet102 (DAY 2) But WON'T Delete Sheet101 (DAY 1)

Example:
If I have added 3 sheets I want it to delete those 3 Sheets:

Sheet104 (DAY 4) <--DELETE
Sheet103 (DAY 3) <--DELETE
Sheet102 (DAY 2) <--DELETE
Sheet101 (DAY 1) <--DON'T DELETE

& give a vbOkCancel MessageBox saying: Do you want to Delete Added sheets?

Okay the code below works, but one thing!

It deletes DAY 30 to DAY 20, then it skips DAY 19 to DAY 10, then Deletes DAY 9 to DAY 1.
So it's not deleting DAY 10 to DAY 19...

Do I need to add a wildcard?

Here is the Code: .....

View 10 Replies View Related

Multiply 2 Columns With Each Other. Dynamic Row Needed

Jul 31, 2009

Hi, I have this good working formula: ...

View 6 Replies View Related

Array (delete Un-needed Data)

Sep 24, 2009

Is there a way to delete this un-needed data while it is still in an array (effectively resizing the array - removing specific columns and rows) and then writing the array back to the worksheet?

Example:
(5X5) Array with the following data

View 3 Replies View Related

Display Needed Info On Different Worksheet

Sep 29, 2009

The worksheet perfectly performs as expected, big thanks to JBeaucaire again. Now, as am looking around of the file and doing some exploration on the array, as I was trying to make this applicable to real life application, I noticed the following mysteries...

1. When I tried to delete some rows, The Members Sheet output went wrong and displaying #N/A. I noticed it's because the formula range have change. But it would be hard for a new user to re-arrange it over and over again everytime when a row is deleted.

2. I've been trying to solve this problem to no avail. I found this link that gives me an idea how my worksheet should work, this was already solved but I can't apply it on my worksheet...

http://www.excelforum.com/excel-prog...nd-resort.html

3. I would like to add another column on A to put the 0 and 1 on, but I don't need to delete this column after the resort so that next time if I need to delete another row existing row i'll just replace the existing 0 with 1 on column A.

View 2 Replies View Related

Specialized Average Formula Needed

Jan 14, 2009

In order to avoid embedding 12 if statements, I want to take an average of a selection of cells based on what month it is. So I have a "now" function, and then a month function referencing the "now" cell so that I get the current month as a number 1 through 12. I have a row of expenses (C14:N14) and I just want the average from January up to the current month. The reason I can't take an average of the entire selection is because the users don't want to have to enter a 0 everytime there's nothing, they'd like to leave it blank, so the sheet needs to recognize what month we're up to. And the average function in Excel only takes an average of the data that is present, not the entire range. For example, if the data in the first cell was 15, second cell was 15, and third cell was blank, the average function returns 15 and not 10. So what I need is, for example, if it's March, the average will calculate =average(C14:E14) and so on. Any ideas? Maybe it's a simple change of formula instead.

View 13 Replies View Related

Loop To Verify If Action Is Needed?

Jul 17, 2012

Anyway, I am basically done with a program which looks for one condition and displays an email to send as a reminder.

What I need is to have an if/then statement which checks a column in the spreadsheet and if the cell in the column states "closed" then an email is NOT displayed/sent. It seems whenever I run the macro, an email appears even if the cell for that row reads "closed."

My if/then statement in question lies following my note " 'here lies my current dilemma to solve"

Code:
Sub ThreeDayEmailTest()
'
' ThreeDayEmailTest Macro

[Code]....

View 6 Replies View Related

Hlookup With Dates Solution Needed

Oct 3, 2008

I am using HLOOKUP to show a date depending on the month shown in B10.

If B10 is January then the dates throughout January ie. 01/01/08 to 31/01/08 are shown in the cell range of F13 to F43. There is no problem with this unless there are 30 or 29 days etc in a month. So if November is in B10, in F43 I have the value of 00/01/1900. Can I modify my formula so if there is no data in the lookup table to return a blank value ie. "".

Here is my formula:

=HLOOKUP($B$10,DATES!$B$1:$M$32,2,FALSE)
I obviously change the 2 to 3, 3 to 4 as I copy the formula down the table.

View 9 Replies View Related

Macro Needed To Open Folder

Oct 4, 2008

need a macro that will open the following folder

c: my documentskatyexcel

View 9 Replies View Related

Formula Needed That Identifies Last Time Product Run

Jan 21, 2014

Basically I have in the first column, different products (lets call them a, b,c and d). in the second column is a counter which starts at 1 and continues counting down the column.

In the third column I need to identify if it is the last time the product has been run. i.e there are no more duplicates of product a further down the 1st column.

I have attached an example : example.xlsm‎

View 2 Replies View Related

Macro Needed For Email/submit Button

Jan 13, 2009

I've got this macro I pulled from some other site and it's not working quite like it should. In my eyes at least...

OK, first, a little back story...
At work we used to have a custom Outlook form that was used for submitting office supply order requests.
The form was stored on our public drive for all to access it when needed.
Well, the form broke somehow and no one knows how to fix it.
We need something to replace it.
Keep in mind that we have no access to the Internet, nor can we send/receive emails outside of the company.

So, I created a simple form in Excel with a drop-down list of all the items in the supply cage, a form field for the senders name, etc...

What the macro does is, it copies the active worksheet the form that just got filled out) to a new workbook (dropdown data is on other sheets in the original) and then opens Outlook (2003) to send it as an attachment.

The only catch is that when the email arrives the only thing filled out is the form fields, NOT the drop downs...

The ONLY way I can get the drop downs to send with data in them is to leave the original open.

Oh, and for some reason every time I sent this while testing, it would name the attachment Book1, Book 2, Book3, and so on. I can't have that...

Here's the code I'm currently using:

View 9 Replies View Related

Sorting Algorithm Doesn't Sort As Needed

Dec 2, 2009

I have this module that is supposed to look in column A and if it sees duplicates it looks in column B (with the date) and erases the entire row where the date is older in column B. I am attaching a sample to better illustrate it.

The highlighted in yellow rows are were I have duplicates and I want the row where the date is in red border to remain.
The module I have so far erases the newer records instead of the older.

This is the file:
Sample sorting.xls

Here is the

View 3 Replies View Related

Formulas Needed To Display Value If Two Conditions Apply

Sep 16, 2008

I need two formulas for my workbook. This is what the formula for Cell B6 needs to accomplish: I need Cell B6 to display what I have entered in Cell A6 but only if Cell A1 is greater than 1. This is what the formula for Cell C6 needs to accomplish: I need Cell C6 to display what I have entered in Cell A6 but only if Cell A1 is greater than 2.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved