way to take 18 different workbooks, each containing the same 5 worksheets, and create a TOC that reference the workbook name only.
For Example, I would like to have one workbook with the first worksheet as an index or a table of contents that lists the name of 18 workbooks. When I hover my cursor over the name of a particular workbook in the index or TOC, it will open that workbook where I can now view 5 worksheets of that workbook.
I'm in need of some VBA code to control the updating of information from 16 active workbooks to a master workbook and vise versa. I would like it on command as it slows down the use of the workbooks when they calculate after every change of data as they are being used. These workbooks are connected over a company intranet and are used 24/7.
The desire is that cells in the master workbook will read specific cells on each of the other workbooks and complete a "map display" of the data. The data is not in a column or row range side by side but scattered across the sheet to form a map when data is entered.
I've tried using code to open and close the workbook with on time events but that hasn't worked.
I have a list of data in columns Q R S and i need to in between each line insert the data from columns D E F underneath and then underneath that the data from G H I
so bascially i have a list at the moment like this
Q R S
[Code]....
There is 2 sheets in total , 1 i need to inc 1-1 draw as above and the other sheet to be exc the 1-1 draw . I have attached an example of what i am trying to achieve . can offer as i have had this on excelforum.com with over 150 views and no solution
I have more than workbook (containing a lot of data ) , each of them has 2 columns ( names and codes)
I need to use VLOOKUP in another workbook , with 2 coulmns also , to get the name relevent to the code that I enter in coulmn A , so that the name appear in the next cell in coulmn B
So I have two sets of data, I've attached a worksheet which has them both. The datasets have different intervals, but I need to drag "Colour" from Data2 into Data1 and associate it with the correct interval. Sometimes the intervals match up and sometimes they don't - which could be a problem, but as long as its within a small spread it's fine. The "Colour" column in Data1 is filled with my desired result, the source being Data2.
I'm trying to make a spreadsheet for work so when im not there they can just enter the day for example sunday and what they have and then it will show them what they need to prep
I have a big list with names, money spent and date. I need somehow with a formula to do:
Take all the money spent on some specific day from a specific person an put it into a field.. and this for every date of the week and for everyname... Im gonna upload a photo.
Name Money
Date
Daniel 5
01.03.2014
[Code] ........
I need the list of the left to produce me list of the right somehow, at least just the sum of everything spent everyday.
I need identifying correct title and corresponding company name. For this I need a UDF which looks for first occurrence of title having event or marketing or meeting word in data and if found the remove other titles and company names already separated with "/".
Sample Data Producer, Target BTC@Periscope/Events Manager, Recognition Events@Minneapolis Park & Recreation Board/Event Producer@Events by JLS
Required Result Events Manager, Recognition Events@Minneapolis Park & Recreation Board
Sample Data 2 Sales Associate@Teavana/Event Assistant@City of Saint Paul
Required Result 2 Event Assistant@City of Saint Paul
Sample Data 3 Sales and Catering Manager@Bunker Hills Golf Course at Town & Country Caterers/Marketing Coordinator@Town & Country Caterers
Required Result 3 Marketing Coordinator@Town & Country Caterers
I am trying to get a MsgBox to appear if the cell value within a given range exceeds a certain number value in my case "8". The only issue I am experiencing is that the code seems to take into account any input from any cell, not just the range specified, and additionally since there are 7 columns in the range the MSgBox pops up 7 times, and I need it only once and if the cell value exceeds "8" only when input.
ideally i would like to do a named range as there as there is a block of data where this will need to repeat.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim cell As Range
With ActiveSheet For Each cell In Range("J40:P40")
If cell.Value [A35].Value Then MsgBox "Red Cell cannot exceed 8 hours per shift. Please correct this." End If Else
See the screen shot I have attached: ramp rate.jpg
Basically I have to trawl through tonnes of data every day and I would like an automatic way to do it for me. I am calculating the ramp up rate on an Autoclave oven so these figures are temperatures.
I have various ranges for each section of a cure cycle so I will use this one example.....
I need to calcuate the ramp up rate between 115°C and 140°C
I need to find the min and max between 115°c and 140°c then count the cells within the min and max, minus the min from the max then divide by how many cells there are inbetween
When I click a command button an InputBox pops up asking me to enter a set of initials. When I enter the initials and click OK all of the rows with the initials in column 'H' are transfered to another worksheet. However if I was searching for say the initials 'AP' and I only entered 'A' and clicked OK, it will still transfer all the corresponding data with an 'A' in column 'H'.
In other words I want the data that is entered into the inputbox to be exact or nothing gets transfered.
I want to create a web address for the attached file and then post the link on my football forum so that members can view the file in their browsers. Is it possible to do this?
I have a macro on: Sheet101 (DAY 1) that adds additional sheets. Example: When I click active button it will add Sheet102 (DAY 2) & can add up to Sheet130 (DAY 30)
I want a macro that will delete any of the sheets added from Sheet130 (DAY 30) to Sheet102 (DAY 2) But WON'T Delete Sheet101 (DAY 1)
Example: If I have added 3 sheets I want it to delete those 3 Sheets:
Is there a way to delete this un-needed data while it is still in an array (effectively resizing the array - removing specific columns and rows) and then writing the array back to the worksheet?
The worksheet perfectly performs as expected, big thanks to JBeaucaire again. Now, as am looking around of the file and doing some exploration on the array, as I was trying to make this applicable to real life application, I noticed the following mysteries...
1. When I tried to delete some rows, The Members Sheet output went wrong and displaying #N/A. I noticed it's because the formula range have change. But it would be hard for a new user to re-arrange it over and over again everytime when a row is deleted.
2. I've been trying to solve this problem to no avail. I found this link that gives me an idea how my worksheet should work, this was already solved but I can't apply it on my worksheet...
3. I would like to add another column on A to put the 0 and 1 on, but I don't need to delete this column after the resort so that next time if I need to delete another row existing row i'll just replace the existing 0 with 1 on column A.
In order to avoid embedding 12 if statements, I want to take an average of a selection of cells based on what month it is. So I have a "now" function, and then a month function referencing the "now" cell so that I get the current month as a number 1 through 12. I have a row of expenses (C14:N14) and I just want the average from January up to the current month. The reason I can't take an average of the entire selection is because the users don't want to have to enter a 0 everytime there's nothing, they'd like to leave it blank, so the sheet needs to recognize what month we're up to. And the average function in Excel only takes an average of the data that is present, not the entire range. For example, if the data in the first cell was 15, second cell was 15, and third cell was blank, the average function returns 15 and not 10. So what I need is, for example, if it's March, the average will calculate =average(C14:E14) and so on. Any ideas? Maybe it's a simple change of formula instead.
Anyway, I am basically done with a program which looks for one condition and displays an email to send as a reminder.
What I need is to have an if/then statement which checks a column in the spreadsheet and if the cell in the column states "closed" then an email is NOT displayed/sent. It seems whenever I run the macro, an email appears even if the cell for that row reads "closed."
My if/then statement in question lies following my note " 'here lies my current dilemma to solve"
Code: Sub ThreeDayEmailTest() ' ' ThreeDayEmailTest Macro
I am using HLOOKUP to show a date depending on the month shown in B10.
If B10 is January then the dates throughout January ie. 01/01/08 to 31/01/08 are shown in the cell range of F13 to F43. There is no problem with this unless there are 30 or 29 days etc in a month. So if November is in B10, in F43 I have the value of 00/01/1900. Can I modify my formula so if there is no data in the lookup table to return a blank value ie. "".
Here is my formula:
=HLOOKUP($B$10,DATES!$B$1:$M$32,2,FALSE) I obviously change the 2 to 3, 3 to 4 as I copy the formula down the table.
Basically I have in the first column, different products (lets call them a, b,c and d). in the second column is a counter which starts at 1 and continues counting down the column.
In the third column I need to identify if it is the last time the product has been run. i.e there are no more duplicates of product a further down the 1st column.
I've got this macro I pulled from some other site and it's not working quite like it should. In my eyes at least...
OK, first, a little back story... At work we used to have a custom Outlook form that was used for submitting office supply order requests. The form was stored on our public drive for all to access it when needed. Well, the form broke somehow and no one knows how to fix it. We need something to replace it. Keep in mind that we have no access to the Internet, nor can we send/receive emails outside of the company.
So, I created a simple form in Excel with a drop-down list of all the items in the supply cage, a form field for the senders name, etc...
What the macro does is, it copies the active worksheet the form that just got filled out) to a new workbook (dropdown data is on other sheets in the original) and then opens Outlook (2003) to send it as an attachment.
The only catch is that when the email arrives the only thing filled out is the form fields, NOT the drop downs...
The ONLY way I can get the drop downs to send with data in them is to leave the original open.
Oh, and for some reason every time I sent this while testing, it would name the attachment Book1, Book 2, Book3, and so on. I can't have that...
I have this module that is supposed to look in column A and if it sees duplicates it looks in column B (with the date) and erases the entire row where the date is older in column B. I am attaching a sample to better illustrate it.
The highlighted in yellow rows are were I have duplicates and I want the row where the date is in red border to remain. The module I have so far erases the newer records instead of the older.
I need two formulas for my workbook. This is what the formula for Cell B6 needs to accomplish: I need Cell B6 to display what I have entered in Cell A6 but only if Cell A1 is greater than 1. This is what the formula for Cell C6 needs to accomplish: I need Cell C6 to display what I have entered in Cell A6 but only if Cell A1 is greater than 2.
I have a need to use data validation for user selection of dependent lists, but dependent upon what the user picks from a previous list I need some selections to disappear or become hiden somhow.
For example, let's say I want to first pick from a list of Countries, then States, then Cities, but some of the Countries do not have States, just Cities and some have both. When a Country does not have any States I need the States data validation drop down box to disappear and the cell to become blank so that the user knows there is no selection needed.
I know how to make the dependent data validation lists, but I do not know how to make one of these drop down lists disappear based upon a previous selection in dependent lists.
I have a phone list set up as LastName, FirstName PhNum all in a single column. The problem is, some last names have a space, some phone numbers are in the xxx-xxx-xxxx format while others are just an extension like xxxxx.
Example: Smith, John 519-123-4567 Van Smit, Joe 12345
What can I use in a formula to extract the numbers so that I can end up with 2 columns, one with names, the other with numbers.
I am attempting to have a pop message display when users of a certain form "X" out of the form. Below is what I came up with but it does not seem to be working:
Code: Private Sub IntroUpdate_BeforeClose(Cancel As Boolean) Call MsgBox("User closed the program before any formulas were updated.", vbExclamation, ".: ALERT: FM Program Tabs :.") End Sub
Currently the above is in the code section of the form (titled: IntroUpdate).
Also if the form unloads I do not want the message displayed - only in the event that a user "X" out of the specific form titled: IntroUpdate).
In my spreadsheet, I have data for each sale in each row. Column C is the buy price, and column D is the sell price. I need column C to be subtracted from column D to get the profit into column E so that I can AutoSUM any cells in column E for total profit over any time period. The problem I'm having is that in columns C and D, I have either a dollar sign in front, or the letter m following without a space (ie $45.00 or 150m). Many cells in column C also contain another word following the buy price, and many cells in column D have a date following the sell price (ie $32.00 12/11 or 42m buyout).
Examples of how my spreadsheet looks: A1: 12/13/12 B1: Item #1 C1: 100m D1: 152m A2: 12/14/12 B2: Item #2 C2: $20.00 D2: $35.00 A3: 12/15/12 B3: Item #3 C3: 90m bid D3: 120m 12/16
So looking at my example above, I would need cell E1 to automatically show "52m", cell E2 "$15.00", and cell E3 "30m"
How I can get a formula for all of column E that will give me my profit for both $ and "m" for each item (row). I have tried the SUM function but just keep getting the #VALUE! error, it does not ignore the text like many people say it should.
formula to calculate how many cells in a column contain data of any kind. The data might be a number, a word, or even a symbol, such as "):>:)" for example. The range will change from time to time. For example, one day it might be a2:a4956. A few days from now I might delete a few rows from the top, such as rows 2 through 26, so then the range would be a2:a4931. Then I might add rows at the bottom with data that I need to be counted. I dont want to have to change the formula evertime I add or delete rows with data. I do not want the formula to count a blank space created by the space bar as "data." One formula I used sorta worked, but if the cell appeared empty, but had been cleard out by pressing the space bar instead of the delete key, the formula counted it as a cell with data.
In Col D of my spreadsheet, I have a list of security codes, in this list there is a security code "all", i need a macro that will add 1 to the code, so it reads "all1", now i need the macro to run as soon as new data is pasted to sheet "Lending", the ranges in Col D do change on a daily basis therefore cell reference for security codes is not fixed.
