I like this formula a lot and have used it more often, however it has made my file exceedingly slow..
Considering that it takes every small change in the file to compute around 5 mins or more than this the whole purpose seems to be defeated, I have read a lot of posts on Array Vs Non-Array of late by DonkeyOte.
I am working on a spreadsheet for a retail store. Column A has style numbers; Column B has an indication of A+ if that style number is a high selling item; Column C is called June and represents the number of units per style we will need in the month of June. There are some styles in June that we won't need at all and so the cell is blank for those style numbers in the June column.
I want to count all style numbers we will be ordering in June that are also indicated as an A+ item in column B.
So, I want to write a formula that says count populated cells in column C if column A has an A+.
How can we set two criterias in autofilter property in vba? For example if there are two columns - departments and grade ... i want that all those rows that have department as Finance and Grade as Grade A should be filtered automatically in VBA Coding.
I have a spreadsheet with several thousand lines on it and I only want certain rows from it. Unfortunately I cannot use a sort as I have to keep groups of data in the same order (the line count in between the data that I need left behind isn't always the same so I can't go that route either). I was hoping there was some code to delete all rows other than those where the cell in column A contains either "NAME"; "Data1" or "Data 2".
I am attempting to create a formula that will, return text results based on 2 criterion.
This is what my sheet looks like
Name Job Full Time / Partime Bob Admin Full Time Barry Accounts Part Time Chris Claims Full Time Emma Claims Full Time
The formula I have for this is {=INDEX(A1:A4,MATCH(1,(((B1:B4)="Claims")*((C1:C4)="Full Time")),0))}
Which is fine and returns the name Chris, however as you can see from above, Emma also meets the criteria given however, I cannot get Emma to appear also. Is it possible to display more than one entry in a cell/s based on this formula, or am I missing something.
I would use a pivot table to do this, however I need the sheet to be completely automated.
How to create checked and unchecked checkboxes based on three criterion(in sheet 1)?for clear explanation..it will be like this...firstly,the "SELECT TAKEN only"checkbox will checked/unchecked row d20:r20.secondly,the "SELECT RETURN only" checkbox will checked/unchecked row d21:r21 and so on.lastly,"SELECT ALL" will checked/unchecked all the rows.
Find Multiple instances of Numeric Criterion in Row & Return To a Single Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows. Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across each single Row in the Dynamic Range "Data" and have the Results returned to a New Sheet in a single column.
NEW Sheet: The Numeric Criterion is housed in G5. The matched criterion should be returned to the New Sheet starting at G7. Duplicate instances in the same Row should ALL be returned to the same cell in Column G on the New Sheet.
Sample Data Layout: Columns I J K L M N O P Q R Row No.76 1 0 1 1 0 1 1 1 0 1 Row No.77 2 2 3 2 1 2 2 0 0 0 Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario: Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet: Row No.7 Column G (Cell G7) 1111111 Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be returned to the same cell G7. In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it should be returned to cell G8.
I am retrieving a CSV file from the net. In this file there are 'x' amount of row data and 7 columns. I only care about the values in the 7th column for each row. I also don't care about the entire first row. A graphical version would be represented something like this, with the values I want colored in orange:
I've managed to dice this thing into a jagged array by first splitting it using vbLf as a delimiter, and therefore adding those to an array called Lines(). Then I split Lines() up using commas as the delimiter and threw those into a jagged array, let's call it Breadcrumbs()(). I want to throw all the values from Breadcrumbs(i)(6) into an array of its own. Here's my code so far:
Code: Public Sub CSVparser(file As String) Dim Lines As Variant Dim j As Integer Lines = Split(file, vbLf) ReDim breadCrumbs(UBound(Lines)) As Variant For i = 1 to UBound(Lines) - 1 breadCrumbs(i) = Split(Lines(i), ",") Next i End Sub
I have two column on two seperate worksheets. One worksheet has both columns filled out. On the second worksheet, I want to be able to type in info in once column and have excel pull the other column from the other worksheet.
WKSHT 1 WKSHT 2
ID Name ID Name 1 Bill 3 ?VLookup? 2 Steve 3 Mike
Ive tried using Vlookup('worksheet1'!A2:A4,'worksheet1'!B2:B4,2) but can not get it to work.
I have attached a sample from aspeadsheet I am working on. The option reply sheet has '1' entered if the student has opted to take this course. On the other subject sheets I would like the names who have opted for that subject to appear. Stuidents can opted for multiple subjects. I have tried Match and Index functions but it is difficult as students can opt for more than one.
what I'm looking at doing is counting the number of reccuring unauthorised absences in a list. We have the persons name in column B, the absence type in column C and the date in column E. Basically I need to send out an AWOL notice when 5 days of unauthorised absence for the person in column B has occurred, so I need some sort of indication that this has happened in order for me to stick some conditional formatting in there to flag it.
I'm trying to create a template that will be able to return a sales persons call target based on the category they sell and the current level they are. It works when I only ask it to look for one or the other, but I'm getting stuck trying to make it use both. I've attached a small sample. My original equation is as follows
and this works perfectly fine. The problem I've now got is I need to add in a second criteria for setting the row_num. I've tried the following but I get a ref error. =INDEX($C$2:$Q$51,AND(MATCH($B3,$A$2:$A$51,0),MATCH(D3,$B$2:$B$51,0),MATCH(G$1,Telesales!$C$1:$Q$1,0)))
I have a procedure that I want to pass two arrays to. When I pass a single array it works fine but as soon as I try to pass two arrays I get a syntax error. Both arrays are declared exactly the same way and are used in the same way. Am I limited to passing only one array per procedure?
Now, I need a formula that will sum the entire column B, by looking up the array of column A on another sheet and only summing the numbers on sheet 1 that also have a value of "West" on sheet 2. Sheet 2 looks like this:
This needs to be functional as a template to be used each month - the entire point of the formula is to save time and eliminate the current (and lengthy method that is in use). I can tweak the formulas as needed. But am trying to avoid having to concatenate anything or do any modifications to the format of the sheets.
I'm looking to look up sheet name based on a date, then look the date up within that sheet which is a merged cell, then return the figure in the corresponding cell.
I have a sample worksheet to attach, just have to work out how to do it.!
In the sheet "Cashflow Summary" in cell E24, i want to lookup the sheet name based on the value in C22 (merged cell), then lookup the date in that sheet (6 August 2014), and return the value in cell y8.
The difficulty is with firstly the merged cells, but also performing the lookup over a number of different arrays, as the sheets for each month, have the months listed under each other in rows of 5 days at a time.
I'm having trouble with doing a similar thing with conditions/criteria based on arrays for different formulas (e.g. IF, COUNTIFS, SUMIFS).
Here's what i'm trying to condition and than use different formulas:
column A - Region 1. Europe 2. Europe 3. Asia 4. Asia 5. America 6. Asia 7. America 8. America 9. Europe 10. America
[Code] ....
QUESTIONS
1. (IF, AND ?) For all cases listed in column A that have "university" in the column B, If there is at least one case having "Europe" write 1, if there isn't write 0.
The conditions are "Europe" in column A and "university" in column B. If there are cases like that, I want formula to produce 1. If there are no cases like that, I want formula to produce 0.
* In this example the formula would produce 1. for "Europe" and "university". * If the formula was looking for "Oceania" in the column A with "university" in column B it would produce 0.
2. Using COUNTIF with multiple criteria. Count all of the cases that have "Europe" in column A and "university" in the column B The conditions are "Europe" in column A and "university" in column B. If there are cases like that, I want formula to do count. * In this example the formula would produce 2 for "Europe" and "university". * If the formula was counting "Oceania" in the column A with "university" in column B it would produce 0.
3. Using COUNTIFS with multiple criteria. Count all of the cases that have "Europe" in column A, "university" in the column B and "GER" in column C
The conditions are "Europe" in column A, "university" in column B and "GER" in column C. * In this example the formula would produce 2 for the 3 conditions. * If the formula was counting "Oceania" with "university" and "GER" it would produce 0.
I've spent a lot of time searching the Internet for this (e.g.how to use IF with an array, about different functions and formulas...) and found nothing that works.
For COUNTIF(S) they just didn't work, event with ctrl+shift+enter.
Is there a formula to look in multiple arrays and return whatever it finds i.e. text or numeric values?
Sheet1  ABCDEFGH1Cat0 CatFive Donkey32   Mouse2 Wolf43 4WolfFour CatFive Donkey35   Mouse2 WolfFourSpreadsheet FormulasCellFormulaB1=LOOKUP(9.99999999999999E+307,CHOOSE({1,2,3},0,VLOOKUP(A1,$D$1:$E$2,2,0), VLOOKUP(A1,$G$1:$H$2,2,0)))B4=LOOKUP(REPT("z",255),CHOOSE({1,2,3},0, VLOOKUP(A4,$D$4:$E$5,2,0),VLOOKUP(A4,$G$4:$H$5,2,0)))
I am trying to multiply one array of prices for multiple input products across the volume that that product my go into multiple end products.
I know you can use SUMPRODUCT with two arrays that are equal BUT I want to Multiply the price matrix across 15 or 16 other matrices and sum all the products. The price matrix and the other arrays are all 1 x "whatever".
I am looking to create an index array. the conditions for the array are based on drop down menus. I want to have it that if the drop down menu has * in it, the array should calculate everything rather than a specific value.
The array works fine but only if I place an actual value in the drop down cells which are H2, I2. The third condition is just to ensure it only calculates the array for rows that have numbers above 0. My question is how can I amend it so that selecting "*" in the drop down cells will calculate for everything?
I deal with Income statements of varying length. What I'm trying to do is figure out a way to rank only the expenses.
The account names change from sheet to sheet, and the number of accounts always changes.
However, Expenses always START after a cell in the "A" column marked "OPERATING EXPENSES" and always ENDS after a cell in the "A" column marked "TOTAL OPERATING EXPENSES". However, I don't want to rank "TOTAL OPERATING EXPENSES" because it's the sum of all the indivicual expenses.
I have a large spreadsheet, to which I add 4 weeks worth of data, from a database printout, (cut n paste) to the bottom, this could be any number of rows. However there is a column with week numbers in for each row. I can happily use =SUMIF('FORM R60'!$H$1:$H$1248,$A1,'FORM R60'!$AH$1:$AH$1248)
This gives me the info I need on a TOTALS sheet, across various columns and rows, where the formula sits, adjusted for whichever column of data I require totals. This info is then read by another spreadsheet.
However, rather than manually change the formula (to suit a range) to add certain numbers of weeks, as I do now, I would like to include in the formula a condition say where the week numbers are >5 and <10, preferably if the condition could refer to cells.
This INDEX formula looks at two data sets for a match in two cells on the same row
If there is a match betwen BOTH B&D columns on the same row, the code will take data from column F of the second data set and put it in the matching row of the first data set
How do I set this code to do an OR operation rather than an AND operation on the match check?
I.e. a match in either B OR D rather than B AND D?
=INDEX(custom!$F$2:$F$99,MATCH(1,(custom!$B$2:$B$99=B1)*(custom!$D$2:$D$99=D1),0)) Thanks in advance-
see the attached spreadsheet. Basically I want the formula in the yellow cell to carry out a sum product of two columns, but only for rows where the value in the first (criterion) column is 10.
I behind developed to a time a function of Addition with an only conditional criterion. I would like to extend at least for three criteria, this function I function accurately as the function SUMPRODUCT alone that done in VBA.
Function VlookupAllSum(name As String, IntervalSearches As Range, IntervalReturn As Range) As Variant ' as integer para valores até 32.767 Dim Valor, Nome Dim lin, col As Integer Dim Total Application.Volatile lin = 1 col = lin For Each Nome In IntervalSearches If Nome = name Then Valor = IntervalReturn(lin, col)................
In each row of my data set, columns A thru E contain different three-digit numbers, in ascending order (e.g. 012 312 344 798 880). No number is repeated more than once in a single row, and no two rows contain the same set of five numbers. Column F contains a value (these are what I'd like to sum).
The variables I want to create a formula with are each three-digit numbers, call them X and Y. I want to find the pairs of rows where one row contains X in one of the first five columns, and the other row contains Y and the same other four values as were contained in the four non-X cells in the X-row (note that X and Y may or may not be in the same column, since each row is in ascending order). If X=344 and Y=955, an example of a match would be one row with 012 312 344 798 880 and another row with 012 312 798 880 955. For each X and Y combo there could be many such matching pairs of rows (with different sets of the other four values). I'd like to sum all the values in the X rows of such pairs (and then I'd do the same with a different formula for the Y rows).............
I have collected some data from survey respondents, and I have the following array formula:
=MIN(
IF($C$1:$C$400="happy",
IF($G$1:$G$400="tall",
IF($H$1:$H$400="american",
$F$1:$F$400
))))
What I'd like to do is make the 3rd criterion -- $H$1:$H$400="american" -- dependent on whether the string value in cell A1 ("Evaluate Americans only?") is "yes" or "no".
Because, my actual situation is considerably more complex (see below), I'm looking to insert a test within the MIN array formula to check the value of A1, and calculate the answer accordingly.
I'm aware that I could theoretically create two array arguments (one with & one without the American test), and place them inside an IF function that tests the value of A1. However that isn't practical for my real-world situation...
I occasionally see array formulas with all sorts of symbols that I don't really understand in the array context (such as * and | and . ), and I'm wondering if one of those magic symbols might be the doorway to my solution.
