Sum Identical Rows Meeting Criterion
Aug 10, 2007
In each row of my data set, columns A thru E contain different three-digit numbers, in ascending order (e.g. 012 312 344 798 880). No number is repeated more than once in a single row, and no two rows contain the same set of five numbers. Column F contains a value (these are what I'd like to sum).
The variables I want to create a formula with are each three-digit numbers, call them X and Y. I want to find the pairs of rows where one row contains X in one of the first five columns, and the other row contains Y and the same other four values as were contained in the four non-X cells in the X-row (note that X and Y may or may not be in the same column, since each row is in ascending order). If X=344 and Y=955, an example of a match would be one row with 012 312 344 798 880 and another row with 012 312 798 880 955. For each X and Y combo there could be many such matching pairs of rows (with different sets of the other four values). I'd like to sum all the values in the X rows of such pairs (and then I'd do the same with a different formula for the Y rows).............
View 3 Replies
ADVERTISEMENT
Apr 28, 2008
I have a spreadsheet with several thousand lines on it and I only want certain rows from it. Unfortunately I cannot use a sort as I have to keep groups of data in the same order (the line count in between the data that I need left behind isn't always the same so I can't go that route either). I was hoping there was some code to delete all rows other than those where the cell in column A contains either "NAME"; "Data1" or "Data 2".
I tried the code below but that didn't work.
View 10 Replies
View Related
Jan 28, 2014
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
View 9 Replies
View Related
Jun 7, 2007
i have got two tables each on a different sheet. The column headings are not the same but in both tables column A contain names. Users can enter names in column A in the first table, and these should be copied to the second table. However, users can insert rows in the first table which should automatically be copied to the second table to ensure the tables haven an identical number of rows (names)
View 2 Replies
View Related
Mar 8, 2012
I want to delete some rows that are identical. Aside from creating a macros to do this, is there a way to find a row with a specific criteria and delete it if value returns TRUE?
View 1 Replies
View Related
Dec 6, 2013
Is it possible to find duplicate rows that are not EXACT identical. Conditional formatting can find duplicate rows but they must be identical exactly(ofcourse)(even extra SPACE,COMMA,DOT wont find duplicates)
I have name and address(street address) columns. I don not want my invitation cards or mails go to same address twice.
As you can see in the file ..all 5 records belong to same address.(address entered in diff styles,some comma,space extra..etc) 4 and 5 are Son and Wife of 1st person. Row 5 and 6 have same text but one extra space in 5th row makes it unique so i need to eliminate such records with same address So can i set some formula so that duplicate rows will be highlighted if any 3-4 words match ?
Attached File : inwell.xlsx‎
View 2 Replies
View Related
Aug 8, 2007
I found a useful resource on the web that gives a macro that deletes rows when the cells within a SINGLE column are identical. [url]
Does anyone know of a macro that can do more than that, one that will delete rows if ALL cells within ALL columns are identical?
For example, the macro should delete row 4 of the attached spreadsheet. It should leave row #2 there because it's the orginal row. But the duplicate row #4 should be deleted. The macro should leave row #5 there because not all columns are identical for that row.
View 9 Replies
View Related
Jun 21, 2008
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
View 9 Replies
View Related
Feb 24, 2009
I have over 2000 rows with 20 columns and i need to find and remove identical rows. I can do a match with MATCH() by concatenating the columns and comparing them as a whole but i need to apply this to the whole table and i need it to remove all the duplicate rows it finds.
View 5 Replies
View Related
Nov 30, 2006
I am trying to delete rows - based on 1 field in each row not being equal to ANY of the values stored in an Array. e.g. my array has 3 values, CAT,DOG,MOUSE
cells are:
A1 = CAT
A2 = HORSE
A3 = DOG
A4 = DOG
A5 = BIRD
i want to delete rows not containing CAT,DOG,MOUSE. I think the autofilter could be the trick but cant quite get my head around it.
View 5 Replies
View Related
Aug 9, 2007
I have been trying to work on this thing for like 3hours and i could not make even a single line since I dont get what loops I should make and how I should do it. Could someone suggest me how to do this.
1. check the date.Calculate two weeks backwards.
2. Check for id no which is scanned more than once in that two weeks from the current date.
3. Check for type of ppe if its different then leave it if they are same and exceeds 3 of the same type it should BOLD the badge id.
Have attached the sample file.
View 5 Replies
View Related
Sep 3, 2007
Searching through hide/unhide topics seem to yield more complicated codes then my meager needs. Within my worksheet I have a column BD which contains a list of values,
ie:
BD
1
2
3
6
3
2
1 etc..
I've created a toggle button "HideRow", which I would like to use to hide/unide only the rows containing value "2" within column BD.
View 2 Replies
View Related
Jan 16, 2009
I got this code form Ozgrid that works great other than everytime I run the macro it copies everything over again.
View 3 Replies
View Related
Mar 12, 2009
I have a worksheet that contains 2 Rn managers per 3 Site and 2 TSR managers per 3 Site.
I want to be able to sort these managers by Site into 6 tabs: 3 RN tabs and 3 TSR tabs.
I want to keep the original worksheet as is and copy the appropriate rows to the designated worksheets labeled SACRN SACTSR VALRN VALTSR and so on. The data range is A:M
The columns of value is A (JOB) and B (SITE) and here is the sample of the data
JOB SITE TEAM
RN SITE SAC GASTON SUSAN TEAM SAC BERNAL
RN SITE SAC GASTON SUSAN TEAM SAC CASTILLO
RN SITE SAC GASTON SUSAN TEAM SAC CASTILLO
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE VAL RANADA TERESA TEAM VAL RINCON
RN SITE SAC MCINNIS JOHN TEAM SAC SMITH
RN SITE SAC MCINNIS JOHN TEAM SAC LEMON
RN SITE SAC MCINNIS JOHN TEAM SAC JACK
TSR SITE SAC GRECO DAVE M TEAM SAC KEN
TSR SITE SAC GRECO DAVE M TEAM SAC ROGERS
TSR SITE SAC GRECO DAVE M TEAM SAC LOPEZ
TSR SITE SAC SHAVER KELLY TEAM SAC JONES
TSR SITE VAL FRANCIS TEAM SAC YANG
View 9 Replies
View Related
Jun 4, 2009
I have a large number of user inputs which is linked to a data sheet. In this sheet are rows to be kept and rows to be deleted. See attached example...
I need code to delete all other similar rows than the one with a number (1) in the field Complete. There can only be a number (1) in the field Complete in one of the rows.
But if there is no number (1) in the field Complete in any of the rows, no rows should be deleted.
The data sheet is to be transferred to Access afterwards.
View 3 Replies
View Related
Feb 2, 2010
Broken off from:Delete Rows Meeting Criteria
Thats for that, the sheet in the workbook is called Ticket Handling and if i try to change the name in the VBA code it will not accept this.
It Displays the following error:
Compile Error:
Expected: End of Statment
View 8 Replies
View Related
Dec 13, 2006
In my code I am searching a spreadsheet for certain states and deleting rows that have states I want to exclude. Is there a way to do this with a list of states, instead of having to make many for loops?
For i = lastrow To 2 Step -1
Cells(i, 4).Select
If Cells(i, 4).Value = "PA" Then
Rows(i).Select
Selection.ClearContents
End If
On Error Resume Next
Next
For i = lastrow To 2 Step -1
Cells(i, 4).Select
If Cells(i, 4).Value = "TX" Then
Rows(i).Select
Selection.ClearContents
End If
On Error Resume Next
Next
View 5 Replies
View Related
Aug 7, 2007
I have the following code that works well on a single worksheet
Sub hide()
For Each rw In ActiveSheet.UsedRange.Rows
If rw. Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw
End Sub
However I want it to run on each worksheet in the workbook when I run the macro. I tried this but it seems to loop continuously on the first worksheet. When I press escape the line "next row" is highlighted in yellow by the debug in the VBA Editor.
Sub hide()
Dim ws As Worksheet
Dim rw
For Each ws In ThisWorkbook.Worksheets
For Each rw In ActiveSheet.UsedRange.Rows
If rw.Cells(3) = 0 And rw.Cells(5) = 0 And rw.Cells(6) = 0 Then rw.Hidden = True
Next rw
'Next ws
End Sub
View 6 Replies
View Related
Aug 20, 2007
I need a macro to sort through a large table of data entries and remove all repetitive entries (entires are based on a number in column A with data entries in B through EY) so i need to locate repetive numbers select entire row and paste them in a new location.
But i cant sort the data as it will change the entire order and i need the data intact.
the user will specify which entry number to search for.
I know some sort of search and loop function would work but i just cant seem to make them work.
View 9 Replies
View Related
Sep 29, 2007
I'm trying to make my spreadsheet to show next hidden row by entering a text or number on the cells in the range of my code. It works from rows 67 to 135 but I canot make it work with an additional ranges on it. if i insert the same instruction 'Private Sub Worksheet_SelectionChange(ByVal Target As Range)' it shows an error that said ambiguos name detected.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If RenglonAnt > 67 And RenglonAnt < 135 Then
If Range("C" & RenglonAnt).Value <> "" Then
Sheet1.Rows(RenglonAnt + 1).Hidden = False
End If
End If
If Target.Row > 67 And Target.Row < 135 Then
RenglonAnt = Target.Row
Else......................
View 2 Replies
View Related
Nov 21, 2007
Excel Range A1 - D500. Data located in column C. I would like to delete the rows in this spread sheet that do not contain any of the following 3 prefixes of part numbers from column C: X-SXP, X-SCM and X-SBP. There are many part numbers but only parts with these 3 prefixes are needed. Part numbers are 10 characters long after the prefix. If any additional information is needed, let me know.
I viewed the Delete Rows Meeting Conditions thread, but the input value in that code is for what you want to delete, and I need to delete everything not meeting the data I want to keep, which is about 30 different part numbers. Also, that appeared to only offer one input and not 3.
View 3 Replies
View Related
Feb 29, 2008
I have an extremely large CSV file that I am opening via Excel. Can anyone tell me how to delete a row using multiple criteria. For Example, i want to delete the whole row if a certain cell doesnt equal GA SC or NC. I have seen how it can be done using one criteria but not multiple ones.
View 8 Replies
View Related
Apr 4, 2008
I have a macro that hides rows in my workbook if certain criterias are met. I'd like to add a criteria to the logic that only hides rows if the date in cell 17 is less than 3 months from today's date. The date in cell 17 is shown in this format: 25-03-2008.
Sub ForceHide()
Dim ws As Worksheet
Dim line As Integer
Dim Endline As Long
For Each ws In Worksheets
If ws.Name <> " Total" And ws.Name <> "Batch" And ws.Name <> "Summary" And ws.Name <> "PivotTable" And ws.Name <> "Fields" And ws.Name <> "RTP" Then
With ws........................
View 3 Replies
View Related
Jun 6, 2008
I Have workbook-1 with 5 cells and 10 rows and in 5 th (E) cell i have value of 1 or 0 .
i want to selectively copy entire rows which has value = 1 in cell(E) and paste these rows into 2 nd row(A2 cell) of workbook-2 using Macro
View 5 Replies
View Related
Aug 11, 2008
I have searched for this topic, and I have read http://www.ozgrid.com/VBA/row-delete-criteria.htm, I don't really understand it though. I think what I want is simple, I want to search column A for cells containing the word " Total" - if any are found I then want to delete the corresponding rows.
View 2 Replies
View Related
Aug 22, 2008
In the included sheet I have 5 groups of data with five categories in column A. Current, Plan, Plan Var, Prior, Prior Var. I have included the button “Show Options” that opens the userform I created and gives 5 options. What I want is the user to be able to select any number of these options and then upon “ok” the rows in the sheet that weren’t selected are automatically hidden. If the procedure is completed again and a differen set of options is selected I want it to unhide any hidden ones that were selected and hide any that werent selected.
So if just current is selected the sheet will show 5 rows of current and nothing else. If current and prior are selected it will show current prior current prior current prior... etc.
I have some hide code that I created in the file as well.
Sub NotCurrentHide() ...
View 5 Replies
View Related
Sep 17, 2009
I'm working with transcribed comments from patient satisfaction surveys. The goal is to produce a single Excel file that contains all of the positive comments from source files where physicians are mentioned by name. Our vendor notes this by preceding any person's name with an asterisk (e.g., *Dr. Smith or *Doctor Smith"). I've attached a sample source file (Ambulatory.xls), so you can see what I'm starting with (I've deleted the identifying data in columns B, C, and D).
I'm looking for the appropriate VBA code to cut and paste the row in one file (in this case, Ambulatory.xls) to a separate Excel file (Weekly Physician Comment Report.xls) IF the cell contents in column G of that row contain either of the following text pieces:
*Dr
*Doctor
Each week's file will obviously have an unknown number of total rows - and will contain lots of positive comments that DON'T mention a physician by name. In the file I've attached here, for example, there is only one such comment (highlighted in yellow). I simply want to cut and paste the rows with physician names into the new file. If you can provide me with the code to do this for this example file, I can repeat the process for my other files (there are 6 source files in all).
View 6 Replies
View Related
Oct 26, 2007
A friend is trying to change an entire row's color based on a specific cell's value in that row. He cannot use conditional formatting. This is the code he's tried, to no avail:
Sub temp()
totalrows = ActiveSheet.UsedRange.Rows.Count
For Row = totalrows To 2 Step -1
If Cells(Row, 25).Value = 4 Then
Rows(Row).Select
Selection.Font.ColorIndex = 3
End If
Next Row
End Sub
View 2 Replies
View Related
Apr 17, 2008
I have a large file of invoices, and some have been paid. The problem is, sometimes it is not paid against the correct invoice, so I have a lot of credit and debit that should offset each other. I want to go through the sheet and highlight all the rows that has a matching ID and an a 0 value when total amount column was added up to another row. I would like it so that it highlights a different color for every pair of offsetting amount, but the same color highlight is fine too.
View 2 Replies
View Related
Jun 19, 2008
1) I have a original worhsheet_A which with header rows(1~6) and many columns.
2) In the sheet_A, there are 2 columns (ColumnN & S) which I need to set criteria (value>5).
3) If any row's data which meet the criteria (value >5) with either column N or S, copy all the entired rows to sheet_B following sheet_A sequence.
4) The sheet_B should have the same header row with sheet_A(row1~6).
Btw, is possible create a corn job trigger this macro to run daily 9am to send out the worksheet_B as email, so that the command button can be disregarded.
View 4 Replies
View Related
