I am trying to create a spreadsheet where when certain conditions are met, a certain score is given. For example, if the condition is >= 300, the score is 15. If the condition is >= 290, the score is 14. All the way down to a score of zero.
I tried...
=if(A2>= 300, "15", if(A2>= 290, "14", if(A2>= 280, "13"))) etc.
I am trying to filter a range of text and copy only those entries from it that meet selected criteria into a new part of my page. The entries will all look like the following but will have varying numbers before the final Equity/Index part:
IBM US 3 C60 Equity
IBM US 3 P60 Equity
UKX 3 P5000 Index
UKX 3 C5000 Index
I have constructed something using a modification of the find nth word function from this site that allows me to filter based on whether the fourth part (or for the third and fourth choices, third part) shows C or P at the beginning and then based on the value that is written after the letter. However, I have to break down the code a bit further to firstly check whether the final word of the string is Index or Equity to decide which word to check for C/P. I was wondering if anyone knew whether there is possibly a more simple way of running a find within one cell than using the nth word function. Would it possibly be a case of making two subs within a different module and then calling them to look for the specific word number based on what I have in F6 (my original equity/index ticker symbol: for example IBM US Equity or UKX Index)? Attaching code below. I'm sure it doesn't make a lot of difference but in case it helps I am currently running Excel 2007 on a Vista machine but I also use it at work on a Win XP PC with 2003.
----CODE----........................
I am trying to find a code that will allow me to generate multiple sheets depending on what is selected in one specific column. I have found a code that is perfect for this however I can't seem to set the range. For example instead of copying all of column headings I only need to copy up to column AN2.
View 1 Replies View RelatedI am trying to create a workload spread sheet for work I need to have the same looking spread sheet 365 times but also need each sheet to be dated, EG (tue,01/04/2014 through to tue,31/03/2015) I can create 365 tabs that have the same spread sheet on and I can create dates but not do both at the same time, it isn't fun doing copy and paste 365 time.
View 1 Replies View RelatedI have 6 different sections of questions, each section having a final average score between 1 and 5.
I would like to somehow create a percentage weighting on each of these sections and then have a final score accross all section, taking into account this weighting?
I want to see if i can make a formula that works out how a player got a score based on a scoring system. See the attached file for more details. I want this to show that the player scored or didn't score, played a full match or was a substitute, was booked or wasn't booked and was sent off or wasn't sent off.
View 5 Replies View RelatedI have a table of golfers with their scores throughout the year. I would like to display the golfer with the highest score - this i can do but my problem is when more than one golfer has the same highest score. How can i dispay the two names. Ideally in one cell but i think i can work around that. If not there will be another post to follow.
A
B
C
[Code]....
I'm Seeking in InRegards To Working Out How To Display Multiple Leaders Within The Same Cell Based Apon There Score In A Game Of Golf, Or If This Cant Be Done Perhaps A Message Saying "Multiple Leaders" So That It Is Known That Its Not Just The One Persons Name That Is Been Displayed. I Have Attatched The Document I Have Been Playing With While Trying To Work It Out Before Making A Big Sheet.
As You Will See "Daniel" And "Paul" Both Have The Same Score, And Below In The Summary It IS Currently Only Showing "Daniel" As The Scratch Leader, Is There A Way Of Getting It To Show Them Both As A Leader, EG: "Daniel, Paul", Or As Said efore Just Saying "Multiple Leaders" Thus Having To Manual Go Through Them ( The Fist Option Would Be Better As There Will Be Approx 85 Names In The Final Sheet)
i have many tables for many carriers with the same format, and i need to create a unified table of them, the tables look like this
-------A---------------------B-----------------------C---------
----Destination----------Country_Code-----------Price_Per_Minute
1------UK-------------------4479-------------------0.256-----
2------USA------------------1148------------------0.300------
3------Jordan----------------9626------------------0.899------
4------India------------------9198------------------0.345------
so let us consider that these are the prices for X company and i have another ten tables for other 10 companies, what i need to do is to create a unified table that includes all the companies prices for all the destination depending on the Country_Code as it could be considered as a primary Key and without any duplications and to include the all the data in all the tables as some destinations and prices are not available in all the tables, so the tables contains different data, the unified table should look something like this
-------A----------------B----------------C------------D---------E------
----Destination-------Country_Code-----X Price-----Y Price----Z Price----
1------UK-----------------4479-----------0.256-----0.254------0.356----
2------USA---------------1148------------0.300-----0.876------ ---
3------Jordan-------------9626-----------0.899------0.987------0.324---
4------India---------------9198-----------0.345----- -------0.564--
I’ve created a spreadsheet to record all transactions ( Sheet 1) at a train auction for members only (Sheet 2). Currently, the workbook I created will ‘manually’ create receipts for any buyers/sellers by filling in Member's name in Sheet 1 and then selecting ‘View ‘Member’ Receipt’ button.
Ideally, I would like a macro that will automatically generate a worksheet for any member that has sold or bought an item at the auction and insert worksheets between ‘Start’ & ‘End’ tabs (with option to refresh data) in location order (A-D). Because members come from near and far we would like to generate the members that need to travel the farthest first. Is it possible to create a receipt for only the members that have transactions?
I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.
This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.
The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.
Here is a working formula for only one page.
=COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))
Here's 2 problems with this formula:
1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.
2. I don't know how to make it work across several sheets.
This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.
SUM(IF(FREQUENCY(IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""), IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""))>0,1))
I need to create a Spreadsheet where a certain Value is added to the from of the data I enter into the cell. For example: All of my MAC Addresses start with 00:80:64. I want to be able to just type in the last three entries into the cell and have Excell automatically add the value 00:80:64 So I want to be able to add a specified value to ebvery entry in a collumn.
View 1 Replies View RelatedI have the following spreadsheet:
A-------------B
File No.-----PRODUCT TYPE
123456-----NDT
123456-----NDT
123456-----NDT
123456---------
123456---------
789110---------
789110---------
789110---------
What I need is if there is an NDT in Column B and 123456 in Column A then I need to eliminate all rows which contain 123456.
End result
A
789110
789110
789110
I've got a master spreadsheet grabbing data from 12-13 different tabs/spreadsheets.
One of those has a table, and I was wondering:
Is it possible for the master spreadsheet to automatically add a new line every time someone adds a new line and creates a new entry in a different spreadsheet?
In other words,
If there is a table in the master spreadsheet, and someone adds a new line, is there a formula which allows the master spreadsheet to add a new line in order to autopopulate?
I'd like to create a button that makes the "Find and Replace" popup come up when pressed. How to do this? (Ctrl + F is the shortcut for it)
View 3 Replies View RelatedI'm trying to create a spreadsheet in which the cell will tell me how many hours, more or less, i have worked a week.
Below is what I’m trying to create - but I'm having trouble.
- if the total = 35 (in cell A1) then display -2 (in A3),
- if the total = 36 (in cell A1) then display -1 (in A3),
- if the total = 37 (in cell A1) then display 0 (in A3),
- if the total = 38 (in cell A1) then display 1 (in A3),
- if the total = 39 (in cell A1) then display 2 (in A3), etc (and so on)
How do I create VBA macro to create CSV files out of Excel spread sheet for each tab? Right now I am manually opening the spreadsheet and saving each tab as CSV file. But it is taking lot of time if we have lot of tabs.
View 14 Replies View RelatedI have a small loan business funded by multiple investors. A spreadsheet that could calculate each investors monthly share of cash flow. Can a party familiar with Excel create this custom sheet with my input. How would your charges be determined.
View 2 Replies View RelatedI was wondering how to create buttons such that when the user clicks on the button they are automatically taken to a different part of the workbook.
I'd like to do this because my spreadsheet is now large enough such that navigating just using the sheet tabs at the bottom is not ideal.
I can create a hyperlink, but I think a button just looks nicer.
1. I have 4 columns (let's say D,E,I,J);
D E I J
Account1 Sum1 Account2 Sum2
151 93,79 BF2479 30,00
1476757 93,79 BF7 22,00
BF2479 30,00 151 93,79
86041 84,03 23235 30,00
534 6608,45
2. I need to clean the multiple identical data in the list by both Account no. and Sum (of course the list is much longer!) so that the list should look like this:
D E I J
Account1 Sum1 Account2 Sum2
1476757 93,79 BF7 22,00
86041 84,03 23235 30,00
534 6608,45
I must say that I am a beginner in Excel, so I tried to use this:
=IF(OR(E5=$J$5:$J$430);IF(INDEX($I$5:$I$430;MATCH(E5;$J$5:$J$430;FALSE);1)=D5;"";E5);E5)
for column E, and
=IF(OR(J5=$E$5:$E$452);IF(INDEX($D$5:$D$452;MATCH(J5;$E$5:$E$452;FALSE);1)=I5;"";J5);J5)
(which is reverse of the first one) for column J; (The ranges are the ones used in the real sheet), not for the ones in the example above!); The formula does seem to eliminate a dew unwanted data, but does not give me all the wanted results!
I'm trying to divide my data into 6 different groups, based on 2 different criteria. First, I am not sure how to write the logical test to take 2 columns of data into consideration (using "&" and "AND" do not work; I am not sure what else to try), and second I can't figure out how to write the formula so that it can select from 1 of 6 conditions.
So, overall here is what I want:
If DL2=3 and CK2=1, then I want this to be labeled as '1'
If DL2=3 and CK2=2, 2
If DL2=1 and CK2=2, 3
If DL2=2 and CK2=2, 4
If DL2=1 and CK2=1, 5
If DL2=2 and CK2=1, 6
These 6 conditions cover all possible combinations of numbers in the two columns.
Has ever created a spreadsheet that used Monte Carlo Simulation?
I've been able to create one that works using the random number generator in conjunction with discrete probability distributions - that's fairly easy, just assign a probability to each discrete value in the distribution and then decide whether or not to select it using a randomly generated number.
However, I want to perform a Monte Carlo simulation that uses a continuous (not discrete) probability distribution, but how I would use the random number generator to then select a value from the distribution based on its probability of occurance.
i have a spreadsheet which i have attached, currently users have to filter each column to get the end result
I would instead, like to create a screen where by they answer questions, for example. a drop down box where they choose flow rate, ie. 0-5l/min 6-10 l/min and so on for each option and then they end up with the list of choices which meet their criteria
I have an Excel spreadsheet containing a large amount of formulas applicable to 2009. I want to create a duplicate workbook for 2010. I want to maintain all cell formatting, ie A1=sum(whatever) without retyping it all. When I attempt to use copy-and-paste (or paste special) from 2009 to 2010, the cell values maintain a reference to the 2009 workbook. For example on 2010 workbook, A1=[2009]sum(whatever). Therefore the values from 2009 print in cells. I only want to maintain cell formula formatting, not a reference back to 2009 workbook.
View 5 Replies View RelatedI would like to combine 2 tabs into one spreadsheet. I was not able to do so, because it exceeds the max rows allowed in excel. I have installed powerpivots but not sure how to combine data using powerpivots.
View 3 Replies View RelatedWhat i'm looking to do is create a spreadsheet where the first page allows me to input the number of teams in the group.The teams cannot play others in the group except the ones they are paired with. eg. "Enter number of team pairs in set" (in this case 4)
Team 1a vs Team 1b
Team 2a vs Team 2b
Team 3a vs Team 3b
Team 4a vs Team 4b
After number of teams in set is established click a start button on the first tab of the spreadsheet.
this auto generates a new tab with all the possible win/loss combinations of 4 team pairs.
New Picture.jpg
if the number of teams on Tab 1 is changed (say to 6) and the start button is clicked, another new tab is generated with all possible win loss combinations of a 6 team set.
remember 1a vs 1b can only be win or lose and the win lose combinations are for the set of 4 matches ( or more matches if specified on the first tab and clicked).
if you put 7 in for the number of team pairs then it would be win loss combos for 7 pairs of teams.
I would simply like to know how to create a basic ranked leaderboard through EXCEL or Google Spreadsheet, which i will later on implement on a community forum. I would like 2 entries for the leaderboard column titles, being:
Column A: PLAYERS
Column B: POINTS
Then under A i will be typing all players manually, and similarly for B with points.
I am trying to create a macro to insert monthly P&L figures into a spreadsheet.
I am needing the macro to insert a column to the left of a column titled 'movement' each month and copy&paste my monthly figures in.
I have recorded the below macro but my inserted column is always moving into column E and pushing the prior month to the right, where I need it to always be situated to the immediate left of the movement column, e.g. if the macro is inserting September P&L data I need it to be situated between August data (currently in column E and movement data currently in row F and so on.
Column C D E FItem
July
August
Movement
Fees
26,500
28,000
2,000
Assets Ongoing
150,000
160,000
10,000
Columns("E:E").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Sheets("P&L Current Month").Select
Range("D11:D127").Select
[Code] ...
get the code for sending multiple emails as per the spreadsheet list. Assume the spreadsheet has 100 line items and each columns specifies the name of the person, value, recipient email address ("To" and "CC") and sender name.
And the Body of text is :
Hi "Name of the person" Please find the value of "Value" to be paid for the moth of xxx and kindly let me know for further clarification.
I am trying to create a spreadsheet to calculate the macro nutrient ratio of foods based on carbohydrates, proteins, and fats and how many units/servings I eat of each. I've attached the file I've started. It's fairly straightforward and simple, thus far.
I would like to be able to associate a food with its various nutritional data in its row (fat, carbs, sugar, fiber, sat. fats, protein.. etc.). With all of my food items entered, I would like to be able to choose from a list, have it prompt me for how many units I've eaten then plug it into my formula to calculate totals and ratios.. The final flow should go soemthing like this...
1. Select a food from a list (each food on the list has its associated characteristics)..
2. Select how much ( each food will have an associated serving size i.e. 1/2 cup, 1oz..) ---- (4) oz VS. entering each unit in A1
3. Make these totals of each characteristic feed into my final chart with which to track and graph.