I am trying to create a workload spread sheet for work I need to have the same looking spread sheet 365 times but also need each sheet to be dated, EG (tue,01/04/2014 through to tue,31/03/2015) I can create 365 tabs that have the same spread sheet on and I can create dates but not do both at the same time, it isn't fun doing copy and paste 365 time.
View 1 RepliesI would like to combine 2 tabs into one spreadsheet. I was not able to do so, because it exceeds the max rows allowed in excel. I have installed powerpivots but not sure how to combine data using powerpivots.
View 3 Replies View RelatedI have a spreadsheet with multiple sheets, which can vary from project to
project, and they all have the same center sections of the headers. Is there
any way to automate the filling in of all these headers based on the first
sheet?
Is it possible to make multple worksheets from a selection of multiple cells?
This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.
I am working on a macro that copies tabs from the spreadsheet the macro (button) is located in, creates a new book for them, and then pastes values so that no formulas still exist. The problem I am having is with named ranges. The named ranges do not reference the new sheet, but rather the old spreadsheet. This is fine because the new file is solely for presentation, however, one macro (which selects print ranges based on user selected checkboxes) tries to reference the old spreadsheet once it runs. I would like the macro that I currently have working, to also make this macro in the NEW spreadsheet so that it can still highlight the correct print area when used. The macro does not reference the name of the workbook at any point, it is purely "Range("ai10") type references so I don't understand why it is trying to open the old sheet back up.
View 2 Replies View RelatedI had in my macro toolbox a macro where in column A I listed names for worksheet the macro would then create and name the worksheets from the list in Column. But unfortunately our share drive where I kept the toolbox crashed and all the data was lost.
View 1 Replies View RelatedIs it even possible to create an IF/AND formula that draws data from multiple tabs?
For example,
(assume there are tabs named exactly the same as each of the data entries in column A)
IF A2 = "ARI" then D2 = ARI!H3. Is this possible?
I need to create a Worksheet within a macro that has 10 tabs. I had something running, then I made some changes and I got Application-defined or object defined error.
Sheets("Sheet1").Name=Sheetname(1)
Sheets.Add after:=Sheets(Sheets.Count)
I was looping thru this up to 10 now its not working. This isn't too complicated,
I work with contracts and have to report the sales for each contract by customer number, name, address, product code or sku, sales amount, quantity, and invoice date. Each contract number is associated with a product group and within that product group are a laundry list of product codes or skus.
Customers are often on different contracts for different products and may purchase some or all of the products on that contract. When I run a query from the system to extract this data, I get one sheet that contains 20,000 lines that have to then be sorted and seperated into different tabs based on the contract number. Keep in mind that a customer may be listed multiple times because each line in the query represents a product code and an invoice date.
I currently have a macro that will format the reporting such that it sorts the data, however, what it doesnt do is look for each instance of a particular contract number and separate it into different tabs.
So below are two examples: April and May 2008 Reports
April 2008 Report
Contract 1 contains 5,000 lines of data - extract into new tab
Contract 2 contains 5,000 lines of data - extract into new tab
Contract 3 contains 5,000 lines of data - extract into new tab
Contract 4 contains 5,000 lines of data - extract into new tab
Total lines = 20,000
May 2008 Report
Contract 1 contains 7,500 lines of data - extract into new tab
Contract 2 contains 5,500 lines of data - extract into new tab
Contract 3 contains 8,000 lines of data - extract into new tab
Contract 4 contains 9,000 lines of data - extract into new tab
Total lines = 30,000
So for the April Example, I would like excel to take this one list and break into 4 new tabs based on the contract number and carry over all of the data into that tab.
Where this may become difficult is that there may be more lines of data one month and fewer another. Im not sure if there is a function that will tell excel to stop when it reaches the last line for one contract number and to start a new tab for the next contract number. (see the month of May example)
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedI am trying to find a code that will allow me to generate multiple sheets depending on what is selected in one specific column. I have found a code that is perfect for this however I can't seem to set the range. For example instead of copying all of column headings I only need to copy up to column AN2.
View 1 Replies View RelatedI am trying to create a spreadsheet where when certain conditions are met, a certain score is given. For example, if the condition is >= 300, the score is 15. If the condition is >= 290, the score is 14. All the way down to a score of zero.
I tried...
=if(A2>= 300, "15", if(A2>= 290, "14", if(A2>= 280, "13"))) etc.
How do I create VBA macro to create CSV files out of Excel spread sheet for each tab? Right now I am manually opening the spreadsheet and saving each tab as CSV file. But it is taking lot of time if we have lot of tabs.
View 14 Replies View RelatedI would like this Macro to run on 6 different tabs in a worksheet as one Macro. It is currently only running on the active sheet. The tabs that I need it to run on are labeled "Totals" "New" "Used" "Service" "Parts" "Other Income-Ded"
Sub ExpenseAnalysis2012()
Dim rngSource As Range
Dim rngDestination As Range
Set rngSource = Range("D3:E90")
Set rngDestination = Cells(3, Columns.Count).End(xlToLeft).Offset(0, 2)
rngSource.Copy
rngDestination.PasteSpecial (xlPasteValues)
End Sub
I am trying to create a macro to insert monthly P&L figures into a spreadsheet.
I am needing the macro to insert a column to the left of a column titled 'movement' each month and copy&paste my monthly figures in.
I have recorded the below macro but my inserted column is always moving into column E and pushing the prior month to the right, where I need it to always be situated to the immediate left of the movement column, e.g. if the macro is inserting September P&L data I need it to be situated between August data (currently in column E and movement data currently in row F and so on.
Column C D E FItem
July
August
Movement
Fees
26,500
28,000
2,000
Assets Ongoing
150,000
160,000
10,000
Columns("E:E").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Sheets("P&L Current Month").Select
Range("D11:D127").Select
[Code] ...
I'm not very good with macros and I need to create a macro that copies data from one excel worksheet into multiple other worksheet tabs in the same workbook. I have 8 columns and thousands of rows of data. The spreadsheet is sorted by column E.
In column E, there are about 25 different values going down throughout the spreadsheet. I would like the data for each of these Column E categories to be copied over to a new tab in the spreadsheet with the tab name as the value in E. So in the end there would be the main tab, and then 25 new tabs with the filtered data. Does anyone already have a macro that will do this?
I am trying to create a spreadsheet to calculate the macro nutrient ratio of foods based on carbohydrates, proteins, and fats and how many units/servings I eat of each. I've attached the file I've started. It's fairly straightforward and simple, thus far.
I would like to be able to associate a food with its various nutritional data in its row (fat, carbs, sugar, fiber, sat. fats, protein.. etc.). With all of my food items entered, I would like to be able to choose from a list, have it prompt me for how many units I've eaten then plug it into my formula to calculate totals and ratios.. The final flow should go soemthing like this...
1. Select a food from a list (each food on the list has its associated characteristics)..
2. Select how much ( each food will have an associated serving size i.e. 1/2 cup, 1oz..) ---- (4) oz VS. entering each unit in A1
3. Make these totals of each characteristic feed into my final chart with which to track and graph.
I'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted
b) Trigger the macro
c) A row is inserted above the highlighted row in Tabs #1, #4 and #5
d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
create a macro that will find and calculate based on the details of 4 columns on the same spreadsheet.
Basically, here is what I need to do:
1. Need to calculate how many QTY IN (Column F) and PALLETS IN (Column I) of a specific PART# (Column A) and LOT CODE (Column B) For example if enter a PART # and LOT CODE, it will calculate how many QTY IN and PALLET IN of that PART # and LOT CODE.
2. Need to do the same for QTY OUT (Column G) and PALLETS OUT (Column J) also.
3. Output should contain the PALLET # , QTY IN and PALLETS IN based on the PART # and LOT CODE search. I just want to simplify the search function in this spreadsheet because it is very cumbersome if you need to find how many items left for that PART # and LOT CODE.
Attached is the spreadsheet..
I have never written a macro and when I record one I usually have trouble with the relative references.
I am trying to write a macro to transform formulas into values every month.
I want to transform formulas:
- across a range of tabs: each tab is exactly alike and is named page-1 to page 25
- on a different column every month (same column across all tabs)
- on the same rows: L168 to L227 and L266 to L277 (same rows across all tabs)
I have 2 workbooks. The workbooks have 36 tabs for each department. Workbook 1 are current charges for the departments and workbook 2 is the revenue for each department. I would like to take the top 2 rows from workbook 2 and add them to workbook 1 at the bottom of each tab. I was able to get it to work to a specific row but the workbook 1 has variable rows for each tab.
View 3 Replies View Relatedget the code for sending multiple emails as per the spreadsheet list. Assume the spreadsheet has 100 line items and each columns specifies the name of the person, value, recipient email address ("To" and "CC") and sender name.
And the Body of text is :
Hi "Name of the person" Please find the value of "Value" to be paid for the moth of xxx and kindly let me know for further clarification.
I have an excel sheet wherin there is a column that has the data where in the dates are displayed and many other columns.
I get this excel every Thursday so i want to filter this date column in such a way that it give me the data related to the date of the previous week only yet there is a catch here. When i say previous week i mean.
Suppose today is 03/14/14 then i want the data from 03/07/14 till today ie Last week friday to this week full( so cant use Current week option) and then paste it in a new sheet.
I tried the Record part but in that it is taking a hard coded value as i am selecting the date myself. I dont want to change the date manually every time.
this was the macro that was created
Code:
ActiveSheet.Range("$A$1:$BX$58").AutoFilter Field:=1, Operator:= _
xlFilterValues, Criteria2:=Array(1, "3/10/2014")
Range("A59").Select
ActiveCell.FormulaR1C1 = "=COUNT(R[-4]C:R[-1]C)"
Range("A60").Select
I have attached a test workbook excel 2010 (ignore ref# errors, I've cut the workbook down for uploading purposes) What I would like to do is have a 'Button' on my 'information Sheet' which when clicked would clear certain cells. I have searched the forum but can't find a solution, everyone seems to want to delete rows or columns but I just want to clear certain cells. The workbook will have 11 sheets each named 'caravan 1' through to 'caravan 11' The uploaded test workbook only only has 3 sheets.
On 'caravan 1' (which is slightly different to the other 10) I want to clear the content of cells
B4 & B5
C4, C22 & C41
D4 & D5
E4,E5, E22,E23,E41 &E 42
On all other 'Caravan sheets' I want to clear the contents of cells
D4 & D5
E4, E5, E22, E23, E41 & E42
It would be icing on the cake if it could give a warning such as " are you sure you want to clear these cells" but that isn't really necessary. The worksheets will be password protected, but the cells mentioned above will not be. If it proves too difficult to clear all the cells on all the sheets with one click, then perhaps a simpler solution might be to have a button on each sheet instead
I have a list of cities, counties, and schools with dates for each account. I want to put these into a workbook with tabs along the bottom for each one, then I want to be able to select all of the accounts that have a Jan 1st effective date and show them on a list in the first worksheet.
View 9 Replies View RelatedIs it possible to move rows of data in a spreadsheet to multiple spreadsheet accordingly?
I had lists of tasks in a single spreadsheet and i need to segregate the tasks for all my staff in serial while no duplication among all of them. For instance, i got 4 personals in my department and i need the 1st 4 tasks to be distribute to each of them and next 4 tasks accordingly. This is due to all tasks are equip with due date and i need to calculate how much time i need to accomplishing them. i'm used to manually move it and found it time consuming, so i was wondering if someone would instruct me where or how to achieve it by using a simple macro.
From a master (data entry) spreadsheet of work projects, I'd like to automatically create a tab for each individual contributor that lists all projects they are involved with. The thing is that being a contributor can mean being the lead, assisting with, or being the technician on the project (all columns in the master). To make the individual tabs easier to read, it'd be great to have that tab's contributor name in red, wherever it happens to fall in the various columns.
I've created an example that's a little simpler than reality - in real life there would be 20 tabs for the individual contributors and instead of 3 "Assist" columns there would be 20 columns.
Can you passwrod protect a tab or a range of cells within a spreadsheet
View 9 Replies View RelatedI am interested in printing an entire workbook in one shot with multiple tabs, where each tab is one page. I would like to print the tabs such that the first tab has the number '1' in the footer, the second tab has '2' etc. And I don't want to go into each tab and type the number in the footer.
Does anyone know how to easily make this happen?
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.