My data range is E2:H15. A separte calculation would generate a number in C2. C4 uses Index(match) to finds the closest Vol match greater than or equalin column E. Column E is sorted Desending for the Match. The user then inputs two maximum values for W (column F) and H (col G).
The example problem should return 20 for L. Help! I have been trying every combination of index, match, lookup etc.
Sheet1 *ABCDEFGH1****VolWHL2*Minimum Vol463*800104203Lookup 1Closet Match Greater Than or Equal To480*64084204Lookup 2Input Max W =8*600103205Lookup 3Input Max H =3*600104156****48083207*Solve for L20*48084158****48064209****4501031510****4001041011****360831512****360632013****360641514****320841015****30010310Spreadsheet FormulasCellFormulaC3=INDEX(E2:E15,MATCH(C2,E2:E15,-1),1) Excel tables to the web >> Excel Jeanie HTML 4
Attached is my sample workbook. There would normally be 600+ employees with multiple rows per employee. I would like Cell O3 in the Premium Calculation Worksheet to look at the Premium Contribution Report, and if Row A contains the employee number (A3) AND row C contains "H&D" I would like it to sum row E.
I included the sumproduct formula I tried to put together but I'm getting an error, so I'm not sure what I've done wrong. The reason I have it referencing "O2" instead of just inputting "H&D" is that O2 could be any number of plans - I have multiple rows with different plans and I need it to pull in all the data.
I have end of the week Brain fry.In Row 4 - The Date the report Arrives is entered. If Blank the report has not yet arrived.
In Row 6 - The Date the report is processed is entered. If Blank the report has not been processed. (Suppose to be process the next business day)
Neither row (4 or 6) are sorted, all rows are sorted by Row 3 (Sales Date) Columns C:AOThis is for one Location there are more than 20 locations.Different rows for each location each 2 rows apart.There are 12 Sheets one for each month.I need to find the oldest date in Row 4 that exist, that does not have a processed date in Row 6.For each Location spanning all 12 months.I Hope this is clear enough.
I use the sumproduct for the attached example. I know I have seen this somewhere on the forum where I can get a value based on a criteria from a row and criteria from a column, but I just can't seem to figure it out right now.
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
I am looking around any way wherein I can sumproduct the values as given in attached sheet, basically I wanted to know the total MRP value of Sale and Stock
I am stuck - I have a large amount of data for a group of physicians I work for. I am trying to set up a monthly trend report to be able to run quickly after I plug in the data. I want to use some sort of lookup to look up two things - 1) the physician's specialty and 2) the month.
Can anyone look at the attached example and tell me how to do this? I have started a SUMPRODUCT formula, but am stuck on how to tell it to find only that month's data.
I was wondering if I could use a range of cells as my criteria as opposed to inserting quotation marks with each criteria. For example in the syntax below can I do something like this? Report!$C$3:$C$5000=B45:B51?
My sumproduct has multiple conditions - is there a limit to the number of multiple conditions one sumproduct formula can have? I didn't think there was????
The formula looks like this, and should return results - at the moment, it returns #N/A. Does it have anything to do with the fact that I'm using named ranges?
I'm trying to create a budget worksheet that pulls actual data from another sheet within the file for comparison (Budget vs. Actual). There are two criteria: 1) the actual transaction falls into the same category of transaction as the budget line item (e.g., mortgage payment) and 2) the date of the actual transaction matches the month in the budget (e.g., a January or March transaction isn't pulled into the actual data for February budget information). From there, I'd like it to sum any charges or reduce by any deposits for those given criteria.
I've tried numerous things from DSUM, to SUMIF with IF, to SUMPRODUCT.
Column B has the "date" Column D has the "time" Column E has the "field" then in Column F is "VIN" and Column G is "HOMI"
Then I have another area on my page that I need to redistribute data.
I need a vlookup, sumproduct, or something that will give me the data I want. here is what i am looking for:
R138 through AE300 is the data area. Column R has the "date" Column T has the "time" Column V and W are "field 1" Column X and Y are " field 2" Column Z and AA are "field 3" Column AB and AC are "field 4" Column AD and AE are "field 5"
I want to be able to put a formula in the field areas V138:AE300 that will find the "VIN" and put it in my new area and my "HOMI" and put it in the new area.
Is this impossible? Or is this just wishful thinking? If I need to give anymore info let me know. I cannot add any software at work so I can't show you the data I am talking about, unless i can copy and paste the sheet to show you.
I received an answer to my original question and now have a new question but I wanted to reference my original for the history. I posted my new question at the end of my original thread.
I have two text columns and a column with numbres in a worksheet called 'SZU new'. In another 'summary' worksheet I am able to return a total number where the two conditions are met by entering in a cell:
BUT how do I adapt the formula above so that I can get a total number meeting the two conditions in ten different worksheets and with a varying range of rows eg the data could be from $D$9:$D$500.
I don't want to repeat the above formula ten times, even if this was possible in excel.
I trying to figure out how to calculate a field based off multiple variables that are dependent on another cell range.
I'm looking to count everything in the C8:C49 cell range that contains either "BETA" or "FINAL" in the cell but ONLY if the F8:F49 cell range contains "In Test")
I haven't been this deep into excel before. The deeper I look, the more potential I recognize, the more amazed I get. That being said, I have come to a tough count issue. Let me attempt to explain as precisely as possible.
My current worksheet is large but I am only particularly concerned with two columns of information (Regions) and (Days). The logic I am attempting is something along the lines of Count If Region = East, or West, and Days is greater than 0, less than 60.
I am open to any and all suggestions on how to tackle this situation. I have been able to achieve similar counts by using pivot tables but the dynamic nature of these two columns presents some difficulties that my “new user” mind has been unable to work through.
I have 2 columns of data being populated by vlookups
Column H is both numbers and text. Column I is Text and blanks. I need to be able to find only numeric values in column H greater than 0 and compare those occurrences with the corresponding cells in column I and if column I has a text entry (not a blank space) than to count that and at the end give me a total number of times these 2 criteria are met. As an example.
If column H has a text entry then don't count it. If column H has a number less than zero then don't count it. If column H has a number greater than zero but column I is blank then don't count it. If column H has a number greater than 0 and column I has a text entry then count it.
I've tried using many variations of a sumproduct formula and none of them work.
This formula counts all instances where column I has a text entry without checking column H for a number greater than 0.
=SUMPRODUCT(--(H2:H110>0),--(I2:I110<>" "))
Or it's possible that the formula is counting the text entries in column H as a number greater than 0 but I'v tried excluding text using this..
=SUMPRODUCT(--(H2:H110>0&<>"*"),--(I2:I110<>" "))
but this causes an error in the formula somehow that I can't figure out. I even tried this
=SUMPRODUCT(--(H2:H110>0&"*"),--(I2:I110<>" "))
and I get a formula that counts only the times text appears in column H and column I together which is not what I want either.
I'm self-taught on Excel so I know there's a lot I'm not understanding about creating formulas like this but I need to have this working by Friday and I just want it to work.
Ive started using the sumproduct function to count multiple conditions which is useful
howveer if i want to count those records in one column that meet a condition and those records in another column that meet anyone of a number of conditions how can i do that?
I have two sets of criteria I want to incorporate into one formula. In the first column, if the criteria is matched, it will check the criteria in the next column. The criteria in the second column is something that resembles the 'or' function. So if criteria equals x,y, or z, sum the results from the data range c3:c98. I tried writing it like this.
I'm needing a macro that will allow me to get around the limits of no more than 7 IF statements and using a SUMPRODUCT formula as well. I need the total or sum of the macro/formula to be in cell "DB8".
Here's my formula: =SUMPRODUCT(IF(CP8=M11,EXACT(K7,"DI"),0)+0+SUMPRODUCT(IF(CP8=W11,EXACT(U7,"DI"),0)+0+SUMPRODUCT(IF(CP8=AG11,EXACT(AE7,"DI"),0)+0+SUMPRODUCT(IF(CP8=AQ11,EXACT(AO7,"DI"),0)+0+SUMPRODUCT(IF(CP8=BA11,EXACT(AY7,"DI"),0)+0+SUMPRODUCT(IF(CP8=BK11,EXACT(BI7,"DI"),0)+0+SUMPRODUCT(IF(CP8=BU11,EXACT(BS7,"DI"),0)+0+SUMPRODUCT(IF(CP8=CE11,EXACT(CC7,"DI"),0)+0+SUMPRODUCT(IF(CP8=CO11,EXACT(CM7,"DI")+0,0))))))))))
I want to create a certification only list on a separate tab of training that has been completed where a certification has been issued (as indicated by a "Y" in the "Certification?" column on the training tracking tab) and then populate from some of the fields vs. all of the fields.
What I have now, only pulls the first occurence, not all occurences. I saw that I could have identified the multiple columns that needed to be populated, but it didn't work either, so I'm fine putting a separate vlookup in each column.
I have an issue with SUMPRODUCT. My data is the budget for different items as follows
Column C has criterias such as Payroll, Expense or Fringes. Column D has criterias such as "32", "43" Column E to P are the numeric value (budget) by month (Period 01 to Period 12)
I am trying to create a formula that, for a given month, will sum the budget according to specific criteria.
For example, I want the value of the budget for "Payroll" + "32" for Period 1.
I used INDEX/MATCH so that the range into which the sumproduct will look for data to sum is variable and depends on what I want (I can easily change E18 to any period for which I would like to see my budget).
Now, I would like to take this to the next level and ask for a range of a column. For example, I would like to know the value of budget for "Payroll" + "32" for Period 01 + Period 02 + Period 03. How can I do that? I tried adapting the INDEX/MATCH but got no results.
I've not used SUMPRODUCT previously and can't understand how to get results for the attached.
I've tried SUMIFS but it doesn't work because I'm looking down columns and across rows, I'm assuming.
I've attached a summary of what I'm trying to achieve. I want to sum all costs with an R,P,I,G, etc. in column C for December '13 (E3) in the top table.
The second table is actually in a different sheet but is the source of the data I need added.
