Multiple Worksheet_Change Events

Dec 20, 2007

I have code the following code that is working great:

Private Sub Worksheet_Change(ByVal Target As Range)

If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("C2:C" & Rows.Count)) Is Nothing Then
Application.EnableEvents = False
If IsDate(Target) Then
Target.Offset(0, -1).Value = Month(Target)
ElseIf IsEmpty(Target) Then
Target.Offset(0, -1).ClearContents
End If
Application.EnableEvents = True

End If
End Sub

But I also need to create the same type of code that will copy the cell entry from column E and paste that data into column A along the data from column B that was created from the above code. This data is a sort of key for a vlookup formula on another worksheet. How do I "nest" this second bit of code into the original code?

View 3 Replies

Multiple Worksheet_Change Commands On The Same Work Sheet

Jun 12, 2007

I have 2 cells on the same page of the worksheet that I would like to have a popup box flag if the user has entered a number over 100%. In this example the value is hard coded in cell A41 as 100% and can not be changed by the user. The entry cells are A14 and A15. The code works fine if I comment out one of the Worksheet_Change statements.

Is there a way to have 2 worksheet_Change statements on the same sheet or do I have to combine the if statement. My attempts at this point to combine the if statements have not worked.

Private Sub Worksheet_Change(ByVal Target As Range)
'MsgBox for the % value range READS
Select Case Target.Address
Case "$H$14"
If Range("H14").Value > Range("A41").Value Then
Application.EnableEvents = False
Application.Undo
Application.EnableEvents = True
MsgBox "This value cannot exceed 100%.", vbCritical, "ERROR"
End If
Exit Sub
Case Else
Exit Sub
End Select
End Sub

View 3 Replies View Related

UserForm Textboxes Triggering Events - Even After Events Have Been Disabled?

Oct 20, 2012

I have a UserForm with a Text Box, I populate that Text Box with a number (say 5) and then the following code runs:

Code:
Private Sub tbOverrideMokWh_Change()
Application.EnableEvents = False: Application.ScreenUpdating = False
With tbOverrideMokWh

[Code]....

After the Sub is run 1 time, it runs again. Why? I've disabled Events?

View 6 Replies View Related

Multiple Change Events

Jul 8, 2013

In both instances I want to put a date stamp of the column immediately after the defined columns below.

The first issue is that when it runs the 1st change event, it only puts the date stamp in the top row of the column. The change in the "Inportedshapeall" column would almost always be brought about from range being copied from another column, however, I would still like a date stamp in every cell of the column.

The second issue comes about when I try to run the second change event. It simply seems to get stuck. I have tried Else, Else if, removing End ifs. I am not sure how best to define the events in order to ensure it loops through both.

VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("IMPORTEDSHAPEALL")) Is Nothing Then
With Target(1, 2)

[Code] ......

View 2 Replies View Related

Multiple Change Events In One Worksheet

Apr 21, 2009

I am trying to have multiple change events work in one worksheet and can not get it to work at all.

The simple setup is, I have a column for each month of the year.

I have several rows of numbers beneath each monthly column.

What I want to do is if I enter a date in say January (my change field), I want it to "ClearContents" out all of the data in the August column.

This works fine currently.

But say the next month I enter a date in February, I want to "ClearContents" in the September column. And so on for each month.

My various attempts at this does not recognize the second change agent, so nothing occurs.

Should I try to "call" each section, or use "Else If", or some other idea?

I've tried attaching the worksheet in case that helps to see what I am attempting.

There are extra "items" on the side and below the table that will be removed if I get this "change event" working. So this worksheet is a rough draft so far.

View 10 Replies View Related

Multiple VBA Calculation Events To Just One Worksheet

Oct 14, 2009

I use VBA's WorkSheet_Calculate event to detect when a cell of particular interest calculates to a specified value. It works well as long as there is only one worksheet (tab). However, when I duplicate that tab (and the final app could have up to 10 copies) to run a different set of data concurrently, I get bad results. The data is online, real time trading data, with each selected stock being tracked in a different tab.

Apparently both (or all) tabs in the workbook react to the same event, whereas I would assume that the event routine in each tab would react only to a calculation in that tab. If this is in fact the case, is there a way to a) make the event routine in each tab respond only to a calculation in that tab, or b) upon a calc event anywhere, determine which tab it occurred in?

Here is the present event code; right now it reads exactly the same in every tab. As long as nothing is happening in any other tab, it does its job correctly.

View 4 Replies View Related

Worksheet Multiple Change Events

Jan 23, 2010

I realize that it�s not possible to have on one sheet, multiple Worksheet Change Events, so I tried to come up with an alternative method of handling it, but quickly realized that it�s beyond my capabilities at this time.

I would like to set up a worksheet change event on each of a number of identical sheets. Each Change Event will run exactly the same macro. The exception is the �DeptStr� string value that is relevant to the sheet calling the macro .

Each sheet will be a different department.�If the Target in either range has data added, then data will be added to the cell offset one column to it�s right.
�If the Target in either range has data cleared, then data will be cleared in the cell offset one column to it�s right.

�There can only be one sheet active at a time.
�Only one sheet has data entered at a time.
�The two non-contiguous ranges are of equal length. Ex. (C3:C52) and (E3:E52) and are uniquely named in this case,

but they are not a necessary requirement in order to solve this problem if there is a more practical method.

View 3 Replies View Related

Referring To Code From Multiple Events

Jul 14, 2006

If I have a button on each of numerous sheets, how do I get all of the buttons to refer to the same bit of code, without having to copy it to the click event of each?

View 4 Replies View Related

Paste Multiple Private_Sub Worksheet Events

Oct 9, 2008

I have 2 codes that I'd like to run on the same worksheet, but i don't know how to paste them in together. This may happen many times in the future, so I'd like to know what rules to follow or how to configure 2 codes such as this to get them to work. For example, here's 2 codes I need ran on the same worksheet and I tried pasting one after the other and it won't let me do both.

View 2 Replies View Related

Multiple Recurring Events In Rows And Columns?

Feb 2, 2012

I would like to create a calendar within excel that would be linked to a series of recurring events. Those events are happening every 15 days, and expected to occur for a period of up to 15 months (so 30 times in a row). We have about 1000 events, each named with an ID code (a01,a02,a03...) We have a database that contains the id code, the date of first manipulation and the recurring dates after that, this file is updated daily, as some schedule might have been moved 1 day as it is meant to be flexible. The difficulty being that a single day may have up to 50 events, hence 50 ID code.

The database (Sheet DB) is organized as follows first row for the headings, data starting from row 2 till row 1205.
Column A is blank
Column B is for the Department ID (Drop Down Menu).
Column C is for the ID code
Column D for the first date (encoded by coordinator).
Column E and forth (AF) for the due dates (formula based on column B).
Now for some instance we have events up to column CC (schedule is flexible and prone to change).
Due dates are linked and will update themselves automatically if any previous date is modified.

For the result (Sheet Cd), the Coordinator needs to see for a specific date all ID codes due for manipulation.

Cd is arranged as follows:
Column A is blank
Column B is the date range that is from 7 days prior today() (row 2) till today()+30 days (row 39).
Column C to BN is supposed to allow the coordinator to see a whole month schedule, due events of manipulation, and monitor past week schedule (in case of delayed manipulation as I stated a possibility of schedule being moved). If this would work, the coordinator would need not update the summary but merely update the database.

A conditional formatting with the formula $A2=TODAY() as condition in order to highlight the present day (faster to spot) is used.
The formula used in C2 is as follows:

=IFERROR(INDEX(DB!$B$2:$B$459, SMALL(IF(Cd!$B2=DB!D$2:D$459, ROW(DB!D$2:D$459)-MIN(ROW(DB!D$2:D$459))+1, ""), ROW($A$1))),"")

I stopped at row 459 here, but eventually it should go to row1205. Above formula being an array is entered as "command+ return" (using a mac, excel v14.1.4).

I was hoping to have each corresponding ID code returned for a specific date regardless of their position in the table DB. DB is sorted per ID code.

Right now the formula is working, as long as we have NO duplicated in Sheet Cd Column D. Also the results are scattered along the rows, and will require scrolling.

View 1 Replies View Related

Could Two Change Events (Conditions) Be Possible With Worksheet Change Events

Dec 13, 2012

I am aware that I can use single changing events in worksheet change events. For instance, if column 1, or A is changed, do something. This is only a single If statement, i.e. either the condition is true, or not. What I am not sure is if I can use two changing events, i.e. two conditions. For e.g. I would like if Column A value is X and Column B is "Active", action it, but only if two conditions are true.

For.e,g. The below syntax does not work. If it is only column A, it does work, but I want both A and B to be true, then copy and paste the target does not anything.

VB:
If Target.Column = 1 Then
If Target.Column = 2 Then
If Not Intersect(Target, Range("A2:A" & Rows.Count)) Is Nothing Then
If Not Intersect(Target, Range("B2:B" & Rows.Count)) Is Nothing Then
If Target.Value = "X" And Target.Value = "Active" Then

View 4 Replies View Related

Worksheet_Change For One Row Only

Jul 24, 2008

With worksheet_change(byval target as range), is there a simple way to focus on only the row that has changed? Currently I have a 'do while' loop that looks for x until it is blank. That is causing a delay that I am hoping to avoid by only changing one row.
Also, any direction on resoures that shed more light on the front half of macros (dim, range, where you want the macro to look and act, etc)