I have 2 codes that I'd like to run on the same worksheet, but i don't know how to paste them in together. This may happen many times in the future, so I'd like to know what rules to follow or how to configure 2 codes such as this to get them to work. For example, here's 2 codes I need ran on the same worksheet and I tried pasting one after the other and it won't let me do both.
View 2 RepliesI am trying to have multiple change events work in one worksheet and can not get it to work at all.
The simple setup is, I have a column for each month of the year.
I have several rows of numbers beneath each monthly column.
What I want to do is if I enter a date in say January (my change field), I want it to "ClearContents" out all of the data in the August column.
This works fine currently.
But say the next month I enter a date in February, I want to "ClearContents" in the September column. And so on for each month.
My various attempts at this does not recognize the second change agent, so nothing occurs.
Should I try to "call" each section, or use "Else If", or some other idea?
I've tried attaching the worksheet in case that helps to see what I am attempting.
There are extra "items" on the side and below the table that will be removed if I get this "change event" working. So this worksheet is a rough draft so far.
I use VBA's WorkSheet_Calculate event to detect when a cell of particular interest calculates to a specified value. It works well as long as there is only one worksheet (tab). However, when I duplicate that tab (and the final app could have up to 10 copies) to run a different set of data concurrently, I get bad results. The data is online, real time trading data, with each selected stock being tracked in a different tab.
Apparently both (or all) tabs in the workbook react to the same event, whereas I would assume that the event routine in each tab would react only to a calculation in that tab. If this is in fact the case, is there a way to a) make the event routine in each tab respond only to a calculation in that tab, or b) upon a calc event anywhere, determine which tab it occurred in?
Here is the present event code; right now it reads exactly the same in every tab. As long as nothing is happening in any other tab, it does its job correctly.
I realize that it’s not possible to have on one sheet, multiple Worksheet Change Events, so I tried to come up with an alternative method of handling it, but quickly realized that it’s beyond my capabilities at this time.
I would like to set up a worksheet change event on each of a number of identical sheets. Each Change Event will run exactly the same macro. The exception is the “DeptStr” string value that is relevant to the sheet calling the macro .
Each sheet will be a different department.•If the Target in either range has data added, then data will be added to the cell offset one column to it’s right.
•If the Target in either range has data cleared, then data will be cleared in the cell offset one column to it’s right.
•There can only be one sheet active at a time.
•Only one sheet has data entered at a time.
•The two non-contiguous ranges are of equal length. Ex. (C3:C52) and (E3:E52) and are uniquely named in this case,
but they are not a necessary requirement in order to solve this problem if there is a more practical method.
I am aware that I can use single changing events in worksheet change events. For instance, if column 1, or A is changed, do something. This is only a single If statement, i.e. either the condition is true, or not. What I am not sure is if I can use two changing events, i.e. two conditions. For e.g. I would like if Column A value is X and Column B is "Active", action it, but only if two conditions are true.
For.e,g. The below syntax does not work. If it is only column A, it does work, but I want both A and B to be true, then copy and paste the target does not anything.
VB:
If Target.Column = 1 Then
If Target.Column = 2 Then
If Not Intersect(Target, Range("A2:A" & Rows.Count)) Is Nothing Then
If Not Intersect(Target, Range("B2:B" & Rows.Count)) Is Nothing Then
If Target.Value = "X" And Target.Value = "Active" Then
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies View RelatedI have a worksheet that utilizes a Worksheet Change Event. I created a macro to copy the sheet and that works fine except for the fact that it doesn't contain the Worksheet Change event.
View 5 Replies View Related2 Woksheet Change Events? I have a question similar to one that was posted about 2 worksheet change events which I found out is not possible and so I have to merge the codes together and I don't know how. I'm facing a problem in the advanced filter when I remove the last item to be filtered and takes forever to calculate.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Address = "$F$2" Or _
Target.Address = "$F$3" Or _
Target.Address = "$F$4" Or _
Target.Address = "$F$5" Or _
Target.Address = "$F$6" Or _
Target.Address = "$F$7" Or _
Target.Address = "$F$8" Or _
Target.Address = "$F$9" Then
Range("Database").AdvancedFilter _
Action:=xlFilterInPlace, _
CriteriaRange:=Range("Criteria"), Unique:=False
Exit Sub
End If
If Target.Column = 3 Then
If Target.Value = "YES" Then........................
If a cell in some parts of the worksheet (SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo in the code) are selected the input (4 digits) should be converted into time (00:00).
Cells in some other parts (Util,Assis) require 6 digits and should be converted into time (00:00:00).
I had the code working in seperate worksheets but combined (as is shown in code bellow) only part of it works.
Only the input entered into the 4 digit part (SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo) is converted correctly.
The input in the other parts (Util,Assis) is not converted (so when 800 is entered I do not get 00:08:00 but I get the hour equivalent of 8 days (19200:00:00) and logically the message from the EndMacro "You did not enter a valid time".
The cell formats are correct [u]:mm and [u]:mm:ss.
To me it looks like it does not jump to the 6 digits part when need but I can't figure why.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim TimeStr As String
On Error GoTo EndMacro
If Application.Intersect(Target, Range("SSMa,SSDi,SSWo,SSDo,SSVr,SSZa,SSZo,Util,Assis")) Is Nothing Then
Exit Sub
End If
If Target.Cells.Count > 1 Then..........................
I have a previously working _chnage event that I am now trying to nest a similar event in. Neither event works now. What am I doing wrong?
Private Sub Worksheet_Change(ByVal Target As Range)
Dim refrange
If Target.Address(0, 0) "C55,G107" Then Exit Sub
refrange = [MATCH(C55,lst_AgentType,0)]
With Sheets("NewInput").Range("d63:r63")
If refrange = 1 Then
.NumberFormat = "#,##0"
ElseIf refrange = 2 Then
.NumberFormat = "#,##0.00"
Else
.NumberFormat = "0.00%"
End If
End With
If Target.Address(0, 0) = "G107" Then
refrange = [MATCH(G107,lstCommRev,0)]
With Sheets("NewInput").Range("E107")
If refrange = 1 Then
.NumberFormat = "#,##0.00"
Else
.NumberFormat = "0.00%"
End If
End With
End If
End Sub
I have a workbook with 4 sheets "Sheet1","sheet2","sheet3" and "sheet4". There is a macro "execute" in "sheet4". How to use the worksheet events, so that if anything on "sheet1", "sheet2" or "sheet3" changes, the macro "execute" in "sheet4" is excuted.
View 5 Replies View RelatedI have a UserForm with a Text Box, I populate that Text Box with a number (say 5) and then the following code runs:
Code:
Private Sub tbOverrideMokWh_Change()
Application.EnableEvents = False: Application.ScreenUpdating = False
With tbOverrideMokWh
[Code]....
After the Sub is run 1 time, it runs again. Why? I've disabled Events?
In both instances I want to put a date stamp of the column immediately after the defined columns below.
The first issue is that when it runs the 1st change event, it only puts the date stamp in the top row of the column. The change in the "Inportedshapeall" column would almost always be brought about from range being copied from another column, however, I would still like a date stamp in every cell of the column.
The second issue comes about when I try to run the second change event. It simply seems to get stuck. I have tried Else, Else if, removing End ifs. I am not sure how best to define the events in order to ensure it loops through both.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("IMPORTEDSHAPEALL")) Is Nothing Then
With Target(1, 2)
[Code] ......
I have code the following code that is working great:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("C2:C" & Rows.Count)) Is Nothing Then
Application.EnableEvents = False
If IsDate(Target) Then
Target.Offset(0, -1).Value = Month(Target)
ElseIf IsEmpty(Target) Then
Target.Offset(0, -1).ClearContents
End If
Application.EnableEvents = True
End If
End Sub
But I also need to create the same type of code that will copy the cell entry from column E and paste that data into column A along the data from column B that was created from the above code. This data is a sort of key for a vlookup formula on another worksheet. How do I "nest" this second bit of code into the original code?
If I have a button on each of numerous sheets, how do I get all of the buttons to refer to the same bit of code, without having to copy it to the click event of each?
View 4 Replies View Relatedi need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
View 5 Replies View RelatedI would like to create a calendar within excel that would be linked to a series of recurring events. Those events are happening every 15 days, and expected to occur for a period of up to 15 months (so 30 times in a row). We have about 1000 events, each named with an ID code (a01,a02,a03...) We have a database that contains the id code, the date of first manipulation and the recurring dates after that, this file is updated daily, as some schedule might have been moved 1 day as it is meant to be flexible. The difficulty being that a single day may have up to 50 events, hence 50 ID code.
The database (Sheet DB) is organized as follows first row for the headings, data starting from row 2 till row 1205.
Column A is blank
Column B is for the Department ID (Drop Down Menu).
Column C is for the ID code
Column D for the first date (encoded by coordinator).
Column E and forth (AF) for the due dates (formula based on column B).
Now for some instance we have events up to column CC (schedule is flexible and prone to change).
Due dates are linked and will update themselves automatically if any previous date is modified.
For the result (Sheet Cd), the Coordinator needs to see for a specific date all ID codes due for manipulation.
Cd is arranged as follows:
Column A is blank
Column B is the date range that is from 7 days prior today() (row 2) till today()+30 days (row 39).
Column C to BN is supposed to allow the coordinator to see a whole month schedule, due events of manipulation, and monitor past week schedule (in case of delayed manipulation as I stated a possibility of schedule being moved). If this would work, the coordinator would need not update the summary but merely update the database.
A conditional formatting with the formula $A2=TODAY() as condition in order to highlight the present day (faster to spot) is used.
The formula used in C2 is as follows:
=IFERROR(INDEX(DB!$B$2:$B$459, SMALL(IF(Cd!$B2=DB!D$2:D$459, ROW(DB!D$2:D$459)-MIN(ROW(DB!D$2:D$459))+1, ""), ROW($A$1))),"")
I stopped at row 459 here, but eventually it should go to row1205. Above formula being an array is entered as "command+ return" (using a mac, excel v14.1.4).
I was hoping to have each corresponding ID code returned for a specific date regardless of their position in the table DB. DB is sorted per ID code.
Right now the formula is working, as long as we have NO duplicated in Sheet Cd Column D. Also the results are scattered along the rows, and will require scrolling.
I am trying to find the total rows in multiple worksheets and to copy the row count to a summary sheet.
For Each ws In Workbooks("HR.xls").Worksheets
With ws
If ws.Name "Summary" Then
If ws.Name "Pivot" Then
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I would like to copy and paste two columns from a worksheet to another worksheet simultaneously. I would like to have a macro to do this function.
View 5 Replies View RelatedI have worksheet 1 and worksheet 2. I have a different list of names in column A in both worksheets. Some of the names in worksheet 1 are in worksheet 2, but only a partial list. Worksheet 2 names are not in any kind of order and the rows do not match up with worksheet 1. In worksheet 1, column B is filled with each person's email address. In worksheet 2, column B NEEDS to be filled with each person's email address.
Is there a way for me to take each name, sequentially, on worksheet 2 and find that same name in worksheet 1, then pull the email address from column B (beside the name) and copy it to that cell in column B of worksheet 2?
I need to loop through worksheets in a workbook and copy every first cell value(A1) and then paste into a new worksheet.
I have tried various loops. some have copied first value for the first sheet and then pasted in the new sheet. while others have been not so good.
This is the code I have so far and this does not work at all.
Code:
Sub Check()
Dim ws As Worksheet
Dim lr As Long
Dim treg As Worksheet
[Code]......
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies View RelatedI have 8 different files all have a set of data in them
each one has a long list of (column a-n) however the number of rows change by date. I need each file copied into the finalfile.xls one after another. in the files that will be merged into the final file the final row i need copied is blank.
I have all the copy formulas and everything set, I just need a range to copy that automaticaly takes cell a10 to the first blank a cell from each file and pastes it in the finalfile.xls under the last paste so they dont over write each other.
I’ve got a folder on drive C named “Customer Sheets”. In this folder at any time there could be over 500 individual customer sheets. i also have a "Summary Workbook" on drive C
What I need is a macro in my "Summary Workbook" that copies cells (“B3, B6, B12, B13, G5, G6”) form every customer sheet in my “Customers Sheets” folder and paste it into my “Summary Workbook” onto sheet2, every customer in a new row.
The “Summary Workbook” should run this macro every time it is opened or on my command so that the database is continually refreshed when a new customer sheet is made.
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
I'm trying to create a macro to merge multiple rows into one cell and display in a new worksheet.
This seems really simple but I've tried to re-work some other examples I've found online but none seem to do exactly what I need. I'm also pretty new to VBA , so it's highly possible i've missed something.
I need to display each set of Notes for each DonorNo in one row - with each note separated by a space.
I've attached a sample of the data and what I need for the output. In the actually file I have around 70,000 records so the prospect manually merging the rows is horrifying.
I have been trying to write a macro so that any rows with a 'Y' in column I in worksheet 'delivery' are cut and pasted into the first blank row of another worksheet 'archive'. I realise that this is similar to previous posts here and have spent all day trying to get it to work using your previous advice but I can't get it to work.
View 9 Replies View RelatedI have a monitoring database and I want to create a 'source' sheet in sheet 1 whereby when I enter names into a certain column they rename different tabs/sheets in the worksheet. for example, the name 'Brown' inputted in cell 'A2' would rename sheet 2, Black in A3 would rename sheet 3 etc.
View 2 Replies View Related