Worksheet_Change To Highlight Changes

Jan 13, 2009

I'm trying to find code (I can't write my own yet) that will highlight any cells that have been changed with fill color and bold font. I've searched around the forum and come up with the code below so far. It's not working - when I make a change to a cell and hit enter, it highlights and bolds the cell BELOW the one that changed!

Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
With Selection.Font
.Name = "Calibri"
.FontStyle = "Bold"
.Size = 11
.Strikethrough = False
.Superscript = False
.Subscript = False
.OutlineFont = False
.Shadow = False
.Underline = xlUnderlineStyleNone
.ThemeColor = xlThemeColorLight1
.TintAndShade = 0
.ThemeFont = xlThemeFontMinor
End With

View 9 Replies


ADVERTISEMENT

Worksheet_Change For One Row Only

Jul 24, 2008

With worksheet_change(byval target as range), is there a simple way to focus on only the row that has changed? Currently I have a 'do while' loop that looks for x until it is blank. That is causing a delay that I am hoping to avoid by only changing one row.
Also, any direction on resoures that shed more light on the front half of macros (dim, range, where you want the macro to look and act, etc)

View 9 Replies View Related

Worksheet_Change

Jul 17, 2009

Can you have more then one worksheet_change event for the same worksheet and if not what is a work around. I have two that I want to use but only the first one works. Both work if they are the only one, but when they are both present the second one does not work.

View 9 Replies View Related

Sub Worksheet_Change

Oct 6, 2009

i have some code that is set in the Worksheet_Change routine.

For some reason the code is not activated when a change is made on the relevant sheet.

I can type into boxes and hit return amongst other things and the code simply wont fire, is there a reason for this (am i missing something)?

my code is...........

Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False

Application.DisplayAlerts = False

If Range("r_PatientType") Sheets("Data store").Range("store_PatientType") Then

If Range("r_PatientType") = "Paroxysmal" Then

View 9 Replies View Related

How To Use 2 Private Sub Worksheet_Change

Jul 10, 2013

VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Target.RowHeight = 16
End Sub

[Code]....

How to Use 2 Private Sub Worksheet_Change

View 6 Replies View Related

Worksheet_change For More Than One Cell

Oct 17, 2008

Worksheet_change for more than one cell
I have the code

View 3 Replies View Related

Worksheet_change Code

Mar 2, 2009

I have a problem with the vba script attached. RoyUk very kindly helped me with this code a few weeks ago.

What I have is an example of some worksheets. I want the person to input into the first sheet their name & period and Y for whether they have checked the balance or not.

The problem I have is that if I fill in all those three details straight away it copies through wrightie, 5 and Y through all the pages. I don't want Y (balance check to copy through) as I need the user to manually input that.

It does work though if I put in wrightie, 5 and then check the other pages to see if it's copied through and then go back to the first sheet and put Y, it seems to work then.

View 9 Replies View Related

Worksheet_Change Event

Dec 31, 2006

I have two workbooks that have the following
Private Sub Worksheet_Change(ByVal Target As Range)
Dim myColor As Integer
With Target
If Intersect(.Cells, Range("v:v")) Is Nothing Then Exit Sub
If IsEmpty(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub
If Not IsDate(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub
Select Case Month(.Value)
Case 1: myColor = 3
Case 2: myColor = 17
Case 3: myColor = 19
Case 4: myColor = 22
Case 5: myColor = 26
Case 6: myColor = 33
Case 7: myColor = 36
Case 8: myColor = 38
Case 9: myColor = 40
Case 10: myColor = 42
Case 11: myColor = 44
Case 12: myColor = 7

I have this code in 1 sheet in one of the books (and all other sheets work fine), and the same code in all sheets in the other book. Both books work the way it's supposed to.

My question,
Is it necessary to have the Worksheet_Change event in all the sheets (all sheets act on the code the same way) or is it okay for just one sheet?

Could I encounter a problem if in only one sheet?

I just don't see why I would have to add more size with the code in all sheets if it is not necessary.

View 9 Replies View Related

Two Private Sub Worksheet_Change

May 22, 2008

I currently have this code in my sheet, and would like to incorporate the second bit of code into the same sheet, but not sure how to do it. At this point, when I just put them together neither will work.


Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Range)

If Target.Column 12 Then Exit Sub

If Target.Value = "Daniel Amaya" Then
Target.EntireRow.Cut
Sheets("Daniel").Range("A3").End(xlUp).Offset(1, 0).EntireRow.Insert
Target.EntireRow.Delete

View 9 Replies View Related

Isolating Worksheet_Change

Jan 28, 2009

I have this code in my worksheet,

Private Sub WorkSheet_Change(ByVal Target As Range)

Dim response As Integer

If Range("AD2").Value = "1" Then
response = MsgBox("Rental Agreement Does Not Exist. Do you wish to continue entering information for", vbYesNo)
If response = vbYes Then
MsgBox ("Add")
ElseIf response = vbNo Then
Range("E2").Value = 0
End If

View 9 Replies View Related

Worksheet_Change Macro

Jun 2, 2009

I have created a macro to hide columns depending upon text in specifically identified cells. However, I am getting the error message "Run Time Error 1004 Unable to set the Hidden property of the Range class" with the line in red below highlighted when I debug.

This macro is worksheet specific.

Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$K$8"
If Target = "Actual" Then
Columns("C:J").EntireColumn.Hidden = True
Else
Columns("C:J").EntireColumn.Hidden = False
End If
End Select
End Sub

View 9 Replies View Related

Adding More Than One Worksheet_Change Function

Feb 1, 2007

I have a bit of code someone on this board provided and I want to make it work for two different ranges. If I just paste it, I get an ambiguous name error. How do I make it work for a second range?

Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim rng As Range
Set rng = [A2:A101]
If Intersect(Target, rng) Is Nothing Then Exit Sub
If IsEmpty(Target) Then
Target.Offset(0, 4).Value = ""
Target.Offset(0, 1).Value = ""
Else
Target.Offset(0, 4).Value = Application.UserName
Target.Offset(0, 1).Value = Date
End If
End Sub

View 9 Replies View Related

Worksheet_Change Event Not Firing

Nov 2, 2008

Bit of an odd one, but I'm sure it's probably happened before to others. I've just been sent a worksheet to redesign (an audit template) one which I'll be making use of data validation lists (Yes, No, N/A) a fair bit.

What I want to happen is that when the user selects from a list, I'll fire a Worksheet_Change event, which will then run some background calculations to set up the next questions, etc. Problem is, the event isn't firing at all. I'm using the following to test the event...

View 2 Replies View Related

Worksheet_Change Event Not Firing ...

Jan 16, 2008

I wrote a simple script to show/hide certain rows based on the value of a certain cell on my worksheet (cell value chosen by drop down). When I left work last night, everything worked fine. When I returned this morning, the change event no longer appears to be firing. I'm quite certain no one else accessed the file to change the coding, so my only guesses are 1)perhaps some sort of system update was applied in the middle of the night and it messed with something or 2) aliens have blocked our technology in advance of their invasion.


Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next

If Target.Address = "F1" Then

Application.EnableEvents = False

Select Case Target
Case "150"
Rows("13").EntireRow.Hidden = False
Rows("14:19").EntireRow.Hidden = True
Case "330"
Rows("14").EntireRow.Hidden = False
Rows("13").EntireRow.Hidden = True
Rows("15:19").EntireRow.Hidden = True
Case "340"
Rows("15:19").EntireRow.Hidden = False
Rows("13:14").EntireRow.Hidden = True
Case Else
Rows("13:19").EntireRow.Hidden = True
End Select

Application.EnableEvents = True

End If
End Sub

View 9 Replies View Related

To Combine Worksheet_Change Macro

Feb 27, 2008

I've been Google-ing for the last 45 minutes and tried to combine them myself, but I'm afraid of breaking it.

I believe the second code was taken from the MrExcel site, I don't remember.

CODE 1:

// Track Changes; updates any/all changed cells with a comment identifying the author, date and change that was made //

Option Explicit
Public preValue As Variant
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Select Case Target.Column
Case Is = 2, 4, 6
Target.ClearComments
Target.AddComment.Text Text:="Previous Value was " & preValue & Chr(10) & "Revised "

CODE 2:

// Whenever a specific range of cells are updated, the adjacent cells update with a timestamp //

Private Sub Worksheet_Change(ByVal Target As Excel.Range)
With Target
If .Count > 1 Then Exit Sub
If Not Intersect(Range("F3:F1000"), .Cells) Is Nothing Then
Application.EnableEvents = False
With .Offset(0, 1)
.Value = Now
End With
End If

View 9 Replies View Related

Private Sub Worksheet_Change (timer)

May 13, 2008

Private Sub Worksheet_Change(ByVal Target As Range)

If Target.Address = "$b$1" Then

For i = 1 To 10
Cells(1, 1) = i
Next i

End If

End Sub

It is supposed to count to 10 when the info in cell B1 changes, i would like to use it as a timer.

View 9 Replies View Related

New Workbooks To Get A Worksheet_change Macro

Oct 2, 2009

Rather than just export and import a module, to import a sheet macro?

I don't quite know what they're called, but basically I have a functional Worksheet_change macro, which is sitting idly in a module. When a separate macro is run which creates new workbooks, It exports that specific module to the desktop, and then the new workbooks all import the module. THat works fine.

But I want all of the new workbooks to get a worksheet_change macro (so a macro that goes into the sheet, not into a module in the workbook)

View 9 Replies View Related

Worksheet_Change To Make Two-way Link

Jun 3, 2006

I am trying to give the user the ability to hard a enter a value in either of two cells and then the other cell automatically changes to the same value when either cell is changed. If cell A1 on Sheet1 is changed to 20, want cell A1 on Sheet2 to also change to 20. But I also want the opposite to happen, if If cell A1 on Sheet2 is changed to 20, want cell A1 on Sheet1 to change to 20. I put this code on the Sheet1 module, but it doesn't work.

Private Sub Worksheet__Change(ByVal Target As Excel.Range)
Dim rWatchrange As Excel.Range
Set rWatchrange = ThisWorkbook. Sheets("Sheet1").Range("A1")
If Not Application.Intersect(Target, rWatchrange) Is Nothing Then
ThisWorkbook.Sheets("Sheet2").Range("A1").Value = ThisWorkbook.Sheets("Sheet1").Range("A1").Value
End If
End Sub

View 3 Replies View Related

Worksheet_change Executing Selectively

Apr 4, 2007

I have a Worksheet_Change method in my sheet module which has suddenly begun working selectively. I have several target ranges in my worksheet that I need to watch for changes. One range of cells is all pull-down menus (a list of electrical loads through excel's validation), another two cells are looking at the name and location of an electrical panel.

When the user selects an electrical load, the worksheet_change method updates a legend of definitions. When the user enters a new name or location, the method updates similar fields elsewhere on the same sheet.

The problem is, excel has stopped executing worksheet_change when a load is chosen or location entered. It only executes when the aforementioned load and location are deleted. However, the name field triggers worksheet_change just fine!

I have attempted to put breakpoints on the worksheet_change method; Excel does not even execute the method as described above. I've tried breaking on the toggling of Application.EnableEvents (which occurs early on in the execution of worksheet_change). I currently have a global watch on Application.EnableEvents and I'm quite sure it's TRUE before I attempt to trigger a worksheet_change event.

My next step is to create a brand new workbook and copy my spreadsheet and code into it. I'll post the results of that experiment.

View 9 Replies View Related

Multiple Worksheet_Change Events

Dec 20, 2007

I have code the following code that is working great:

Private Sub Worksheet_Change(ByVal Target As Range)

If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("C2:C" & Rows.Count)) Is Nothing Then
Application.EnableEvents = False
If IsDate(Target) Then
Target.Offset(0, -1).Value = Month(Target)
ElseIf IsEmpty(Target) Then
Target.Offset(0, -1).ClearContents
End If
Application.EnableEvents = True

End If
End Sub

But I also need to create the same type of code that will copy the cell entry from column E and paste that data into column A along the data from column B that was created from the above code. This data is a sort of key for a vlookup formula on another worksheet. How do I "nest" this second bit of code into the original code?

View 3 Replies View Related

Prevent Worksheet_Change Event

Mar 12, 2008

I'm trying to find a way to bypass a worksheet_change event. Right now, my code validates if a change has been done to a specific cell ("D13"). It works perfectly, too perfectly actually.

Here is the code I got :

First line of Module 1 :

Public bDeviation As Boolean

On Sheet1 :

Public Sub Worksheet_Change(ByVal Target As Excel.Range)

Dim VRange As Range
Dim strName As String

Application. ScreenUpdating = False

View 4 Replies View Related

Can A Worksheet_Change Range Permanently Adjusts Itself

Dec 15, 2008

Working on a simple worksheet_change issue for someone, the thought came, "after this code runs" it would be good if the TargetRange changed to no longer include the rows it had run on already. This way, if you later accidentally deleted/edited a cell that already had data, it wouldn't cause the macro to run again and do the paste job again?

Anyway, here is the code original

View 11 Replies View Related

Worksheet_Change(ByVal Target As Range)

May 15, 2009

when I use worksheet_change for something so simple to do, it prevents me from deleting cells.

When I try to delete the cell values from A2 (5) and A3 (6), they won't delete unless I delete the value on A1 (True).

Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Range("A1").Value = "True" Then
Range("A2").Value = 5
Range("A3").Value = 6
Else
End If
Application.EnableEvents = True
Exit Sub
End Sub

View 9 Replies View Related

Worksheet_Change Event With Named Range

Aug 17, 2006

Is it possible to use a named range as part of the Target.Address in a Worksheet_Change event? For example, if I've named cell A1 to be XYZ, can I use something like the following VBA script:

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = Range("XYZ") Then
.....
End If
End Sub

The above script obviously doesn't work. The only thing I can get to work is:

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$1" Then
.....
End If
End Sub

I would like to be able to use a named range so that I don't have to remember to update my VBA when I insert rows or columns in my worksheet.

View 6 Replies View Related

Worksheet_change Event And Delete Rows

Feb 16, 2007

I'm using the following code. Basically it formats some cells in row based on the value in the first column of the row.

Private Sub Worksheet_Change(ByVal Target As Range)

Dim icolor As Integer
Dim RowNr As Integer

If Not Intersect(Target, Range("A1:A65536")) Is Nothing Then
For Each cell In Target
If Target.Text = "" Then
icolor = 0
ElseIf Target.Text = "Row Loaded" Then
icolor = 4
ElseIf Left(Target.Text, 14) = "Row not loaded" Then

This works fine, except when I delete a row by clicking on the row number to highlight the row, and then right click to select delete.

The event fires for each cell in the rows, and takes ages to run.

Does anyone have any ideas on how to prevent this from happening? I tried substituting


For Each row In Target

View 9 Replies View Related

Using Worksheet_Change To Copy Formulas Into An Inserted Row

Mar 13, 2007

I've a spreadsheet with each row representing a record of some equipment installation escept for Row #1, which contains the column headers. For each record, Columns A through G contain the installation information,Columns H onwards are for monthly billing purposes(March 07, April 07, etc.). Each cell in Column H onwards contains a complicated formula for billing. Under the row that represents the last installation, there is a Totals Row. Since we are adding installations very frequently at the moment, my goal is to: Using a Worksheet_Change Event,

When a row is inserted into the worksheet, the code tests for

1) If the event is an "Insertion"-if not, Exit the code.
2) If the Target is a row- if not, Exit the code.
3) The row number-if row #2, copy the formulas from the row below.
If the row # is less than 2, Exit the code.
4) If the Target Range's row number is > 2, copy the formulas from row above.
5) If the Target Range's row number is => than that of the "Totals", Exit the code.

I've got 2,3 and 4-

How can I test for #1, and for #5, every time a row is inserted, the row # increases. How can I code #5?

View 3 Replies View Related

Worksheet_change Event Disables Undo

Jul 4, 2007

I have a user who wanted a spreadsheet to highlight cells containing formulas whenever the formula was changed. (They want the ability to make changes, but want those changes highlighted. They do not want to protect cells with formulas.) I tried to accomplish this with Conditional Formatting but could not figure out a way to do it, so I turned to VBA. I wrote the following routine that is called on the Worksheet_change event:

Sub CheckFormulas(Target As Range, FormulaRange As String)
Dim CurCell As Range
For Each CurCell In Range(FormulaRange)
If Target.Address = CurCell.Address Then
Target.Interior.ColorIndex = 3
End If
Next CurCell
End Sub...................

View 2 Replies View Related

Get Cell Value Before Worksheet_change Event Triggers

Jul 28, 2007

In the worksheet_change event I am calling a method for performing some calculations. The method is called only if certain cells are affected. I want to know the cell values before the event gets triggered.

For eg: Lets say Cell A1: 10 Cell A2: 20 I select both A1 & A2 and click on delete. Then I want to obtain the values 10 & 20 in the method called. Is this possible? Currently If I do Cell.value it returns blank.

View 5 Replies View Related

Can Worksheet_Change Routine Perform Actions On Different Worksheet

Sep 26, 2013

I'm using a Private Sub Worksheet_Change(ByVal target As Range) macro on Worksheets(2) to perform certain actions when a selection from Worksheets(1) is pasted to Worksheets(2). Before ending the Worksheet_Change sub I'd like it to deselect the copied selection on Worksheets(1). I've tried to do this by selecting Worksheets(1) and moving the cursor, but VB ignores the "With Application.Worksheets(1)" instruction. Removing "Private" from the sub heading makes no difference.

Is it possible do this with a Worksheet_Change routine? If so, how?

View 7 Replies View Related

Multi Column Excel Validation On Worksheet_Change

Aug 14, 2009

I have a fairly large spreadsheet with about fifty columns. Some of the columns have dropdown lists from named ranges on other sheets. The problem i am having is rather than filling in the sheet a row at a time the users are cutting and pasting the values in from other excel docs. Works okay but they paste over my dropdowns and validations making them useless. How can i use the Worksheet_change event to validate the columns that have validation lists whenever a change is made? Overkill- I know but I am using these sheets to load databases and if the value is not valid the load croaks.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved