I've been Google-ing for the last 45 minutes and tried to combine them myself, but I'm afraid of breaking it.
I believe the second code was taken from the MrExcel site, I don't remember.
CODE 1:
// Track Changes; updates any/all changed cells with a comment identifying the author, date and change that was made //
Option Explicit
Public preValue As Variant
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Select Case Target.Column
Case Is = 2, 4, 6
Target.ClearComments
Target.AddComment.Text Text:="Previous Value was " & preValue & Chr(10) & "Revised "
CODE 2:
// Whenever a specific range of cells are updated, the adjacent cells update with a timestamp //
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
With Target
If .Count > 1 Then Exit Sub
If Not Intersect(Range("F3:F1000"), .Cells) Is Nothing Then
Application.EnableEvents = False
With .Offset(0, 1)
.Value = Now
End With
End If
I have created a macro to hide columns depending upon text in specifically identified cells. However, I am getting the error message "Run Time Error 1004 Unable to set the Hidden property of the Range class" with the line in red below highlighted when I debug.
This macro is worksheet specific.
Private Sub Worksheet_Change(ByVal Target As Range) Select Case Target.Address Case "$K$8" If Target = "Actual" Then Columns("C:J").EntireColumn.Hidden = True Else Columns("C:J").EntireColumn.Hidden = False End If End Select End Sub
Rather than just export and import a module, to import a sheet macro?
I don't quite know what they're called, but basically I have a functional Worksheet_change macro, which is sitting idly in a module. When a separate macro is run which creates new workbooks, It exports that specific module to the desktop, and then the new workbooks all import the module. THat works fine.
But I want all of the new workbooks to get a worksheet_change macro (so a macro that goes into the sheet, not into a module in the workbook)
determine the coding for a worksheet_change macro for the attached spreadsheet? I've got a macro set up in the worksheet and would like it to run any time there is a change in any of the cells on the worksheet.
I want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Cells.Count <> 1 Then Exit Sub
If Target(1, 1).Address = "dataentry!H5:IV72" Then If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then
On Error Resume Next Application.EnableEvents = False
Creating a macro that is a combination of other cell values. the cell order is listed below:
C57 = contains a unique number that will change from time to time eg. 1234 H57 = 1 (this will always be the value of 1) N57 = contains text eg. AUDUSD V57 = contains text eg. BS AB57 = contains a number eg. 1.8954 AH57 = 0 (this will always be the value of 0) AN57 = contains a number eg. 0.01 AS57 = contains a number eg. 1.7954 AZ57 = contains a number eg. 1.9954 BH57 = conatins either 1 or 0 eg. 1
the cell needs to contain the above examples like this : BT57 =OpenPosition(1234,1,"AUDUSD","BS",1.8954/0,0,0.01,1.7954,1.9954,1)
This will be needed for a total of 14 rows (57, 59, 61, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83)
The cell with the results cannot have any cell references contained in the end results and must be formatted as above so that the add in program can read and pass on the information.
I have a workbook with two sheets that I need to combine some of the data from. Sheet1 is a template to be used for translation purposes on Sheet2. I would like to put Sales Rep Info in column C on Sheet2 (has only Sales Rep ID) using Sheet1 as a translation table (shows Sales Rep ID and Sales Rep Info). I can do this with a vlookup function but would like to know how to do it in a macro so I can use on other more complex workbooks. Here is a sample data set.
I have an excell spreadhseet that has more than 100 sheets and I would like to combine all these sheets into one master sheet (Sheet1 = MasterSheet) within this workbook. Each sheet has different number of rows used. I just want used ranges to be copied over to a master file appending the previous copied range.
Sub MergeSheets() Dim strSheet As Object Dim LR As Long, LC As Long Sheets("Sheet1").Name = "MasterSheet" LR = Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row For Each strSheet In Sheets If strSheet.Index 1 Then
I've been attempting to find a macro that would combine a number of similar workbooks into one large workbook. The files I'm dealing with are all .csv files with identical columns and headers.
I found one macro here: see below (this is the start of the macro) yet either I'm not using it correctly or there are errors in it as when I run it I get an error that says Run-time error '9' Subscript out of range and gives me the option to debug it. When I choose to debug it opens up the macro and has the following section highlighted?
Set wsMaster = ThisWorkbook.Sheets("Master") 'sheet report is built into
The macro in I found on this site begins with the following:
Option Explicit
Sub Consolidate() 'Author: Jerry Beaucaire' 'Date: 9/15/2009 (2007 compatible) (updated 4/29/2011) 'Summary: Merge files in a specific folder into one master sheet (stacked) ' Moves imported files into another folder
I've got a macro that combines multiple worksheets and workbooks. Just a minor problem, the very last row of each worksheet is being deleted, and I can't seem to pinpoint the cause of the problem.
'This will copy data from all sheets of the selected workbooks 'To a sheet named 'Data' in the sheet in which the macro is run from
Dim pasterow As String mainsheetname = ActiveWorkbook.Name MsgBox ("Please select spreadsheets to combine") filestoopen = Application. GetOpenFilename(MultiSelect:=True) responseval = MsgBox("Do you want to leave the combined spreadsheets open?", vbYesNo) Worksheets("Data").Select Range("A1").Select 'open workbooks For Each w In filestoopen...................
I'm trying to get the following code to work (as a practice run for a bigger set of spreadsheets) but it doesnt seem to work - no errors either. There are 3 workbooks all with 1 worksheet called "Data 1" with 3 columns of data (under 20 rows). These (theoretically) should copy into 1 called " Totals". The code I have used is: ....
I have 2 cells that dump data in a column format. I need to combine these two cells with a ' after the data in the column. This macro will loop down until both column J and K are empty, I need a Macro that 1. Will combine both cells 2. Data will be value format not formula 3. Macro Will run as soon as workbook is opened
Ex. F J K 1 Prop MD MD Objective 2 1' Test Data 1 Test Data 3 235' next data 235 next data
With worksheet_change(byval target as range), is there a simple way to focus on only the row that has changed? Currently I have a 'do while' loop that looks for x until it is blank. That is causing a delay that I am hoping to avoid by only changing one row. Also, any direction on resoures that shed more light on the front half of macros (dim, range, where you want the macro to look and act, etc)
Can you have more then one worksheet_change event for the same worksheet and if not what is a work around. I have two that I want to use but only the first one works. Both work if they are the only one, but when they are both present the second one does not work.
I have a hard time creating a macro from scratch I have 7 different excel files which im trying to create a macro that will combine all of this files (reports) into one, and then put the CT information (an excel file i have) on a separate tab within the 1 common report.
I have a data sheet which has a series of dates within it. So for eaxample the data sheet will have date of "01/07/2007" I then want to take this data and create the following field: "June 2008 Pre Data" The problem I have is when I try to join my variables togeother the code crashes (Invalid Procedure call or argument).
I have a problem with the vba script attached. RoyUk very kindly helped me with this code a few weeks ago.
What I have is an example of some worksheets. I want the person to input into the first sheet their name & period and Y for whether they have checked the balance or not.
The problem I have is that if I fill in all those three details straight away it copies through wrightie, 5 and Y through all the pages. I don't want Y (balance check to copy through) as I need the user to manually input that.
It does work though if I put in wrightie, 5 and then check the other pages to see if it's copied through and then go back to the first sheet and put Y, it seems to work then.
I have two workbooks that have the following Private Sub Worksheet_Change(ByVal Target As Range) Dim myColor As Integer With Target If Intersect(.Cells, Range("v:v")) Is Nothing Then Exit Sub If IsEmpty(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub If Not IsDate(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub Select Case Month(.Value) Case 1: myColor = 3 Case 2: myColor = 17 Case 3: myColor = 19 Case 4: myColor = 22 Case 5: myColor = 26 Case 6: myColor = 33 Case 7: myColor = 36 Case 8: myColor = 38 Case 9: myColor = 40 Case 10: myColor = 42 Case 11: myColor = 44 Case 12: myColor = 7
I have this code in 1 sheet in one of the books (and all other sheets work fine), and the same code in all sheets in the other book. Both books work the way it's supposed to.
My question, Is it necessary to have the Worksheet_Change event in all the sheets (all sheets act on the code the same way) or is it okay for just one sheet?
Could I encounter a problem if in only one sheet?
I just don't see why I would have to add more size with the code in all sheets if it is not necessary.
I currently have this code in my sheet, and would like to incorporate the second bit of code into the same sheet, but not sure how to do it. At this point, when I just put them together neither will work.
Option Compare Text Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column 12 Then Exit Sub
If Target.Value = "Daniel Amaya" Then Target.EntireRow.Cut Sheets("Daniel").Range("A3").End(xlUp).Offset(1, 0).EntireRow.Insert Target.EntireRow.Delete
I'm trying to find code (I can't write my own yet) that will highlight any cells that have been changed with fill color and bold font. I've searched around the forum and come up with the code below so far. It's not working - when I make a change to a cell and hit enter, it highlights and bolds the cell BELOW the one that changed!
Private Sub Worksheet_Change(ByVal Target As Range) Application.EnableEvents = False With Selection.Font .Name = "Calibri" .FontStyle = "Bold" .Size = 11 .Strikethrough = False .Superscript = False .Subscript = False .OutlineFont = False .Shadow = False .Underline = xlUnderlineStyleNone .ThemeColor = xlThemeColorLight1 .TintAndShade = 0 .ThemeFont = xlThemeFontMinor End With
Private Sub WorkSheet_Change(ByVal Target As Range)
Dim response As Integer
If Range("AD2").Value = "1" Then response = MsgBox("Rental Agreement Does Not Exist. Do you wish to continue entering information for", vbYesNo) If response = vbYes Then MsgBox ("Add") ElseIf response = vbNo Then Range("E2").Value = 0 End If
I am looking for a macro that will combine qty's of item codes when first 6 out of 9 numbers in the item number match. Please see example of data below. In this case, the macro looking at the first 6 numbers in used and new. I should get a total of 26 - new and 45 -used.
A B C D E Item Name yard Item Numb Inv New Inv Used Frami panel 3x6 416-100 588801000 6 27 Frami panel 3x6 416-150 588801000 10 Frami Xlife 3x6 416-100 588801500 20 8
I have a bit of code someone on this board provided and I want to make it work for two different ranges. If I just paste it, I get an ambiguous name error. How do I make it work for a second range?
Private Sub Worksheet_Change(ByVal Target As Excel.Range) Dim rng As Range Set rng = [A2:A101] If Intersect(Target, rng) Is Nothing Then Exit Sub If IsEmpty(Target) Then Target.Offset(0, 4).Value = "" Target.Offset(0, 1).Value = "" Else Target.Offset(0, 4).Value = Application.UserName Target.Offset(0, 1).Value = Date End If End Sub
