Rather than just export and import a module, to import a sheet macro?
I don't quite know what they're called, but basically I have a functional Worksheet_change macro, which is sitting idly in a module. When a separate macro is run which creates new workbooks, It exports that specific module to the desktop, and then the new workbooks all import the module. THat works fine.
But I want all of the new workbooks to get a worksheet_change macro (so a macro that goes into the sheet, not into a module in the workbook)
I have created a macro to hide columns depending upon text in specifically identified cells. However, I am getting the error message "Run Time Error 1004 Unable to set the Hidden property of the Range class" with the line in red below highlighted when I debug.
This macro is worksheet specific.
Private Sub Worksheet_Change(ByVal Target As Range) Select Case Target.Address Case "$K$8" If Target = "Actual" Then Columns("C:J").EntireColumn.Hidden = True Else Columns("C:J").EntireColumn.Hidden = False End If End Select End Sub
I've been Google-ing for the last 45 minutes and tried to combine them myself, but I'm afraid of breaking it.
I believe the second code was taken from the MrExcel site, I don't remember.
CODE 1:
// Track Changes; updates any/all changed cells with a comment identifying the author, date and change that was made //
Option Explicit Public preValue As Variant Private Sub Worksheet_Change(ByVal Target As Range) If Target.Count > 1 Then Exit Sub Select Case Target.Column Case Is = 2, 4, 6 Target.ClearComments Target.AddComment.Text Text:="Previous Value was " & preValue & Chr(10) & "Revised "
CODE 2:
// Whenever a specific range of cells are updated, the adjacent cells update with a timestamp //
Private Sub Worksheet_Change(ByVal Target As Excel.Range) With Target If .Count > 1 Then Exit Sub If Not Intersect(Range("F3:F1000"), .Cells) Is Nothing Then Application.EnableEvents = False With .Offset(0, 1) .Value = Now End With End If
determine the coding for a worksheet_change macro for the attached spreadsheet? I've got a macro set up in the worksheet and would like it to run any time there is a change in any of the cells on the worksheet.
I want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Cells.Count <> 1 Then Exit Sub
If Target(1, 1).Address = "dataentry!H5:IV72" Then If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then
On Error Resume Next Application.EnableEvents = False
With worksheet_change(byval target as range), is there a simple way to focus on only the row that has changed? Currently I have a 'do while' loop that looks for x until it is blank. That is causing a delay that I am hoping to avoid by only changing one row. Also, any direction on resoures that shed more light on the front half of macros (dim, range, where you want the macro to look and act, etc)
Can you have more then one worksheet_change event for the same worksheet and if not what is a work around. I have two that I want to use but only the first one works. Both work if they are the only one, but when they are both present the second one does not work.
I have a problem with the vba script attached. RoyUk very kindly helped me with this code a few weeks ago.
What I have is an example of some worksheets. I want the person to input into the first sheet their name & period and Y for whether they have checked the balance or not.
The problem I have is that if I fill in all those three details straight away it copies through wrightie, 5 and Y through all the pages. I don't want Y (balance check to copy through) as I need the user to manually input that.
It does work though if I put in wrightie, 5 and then check the other pages to see if it's copied through and then go back to the first sheet and put Y, it seems to work then.
I have two workbooks that have the following Private Sub Worksheet_Change(ByVal Target As Range) Dim myColor As Integer With Target If Intersect(.Cells, Range("v:v")) Is Nothing Then Exit Sub If IsEmpty(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub If Not IsDate(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub Select Case Month(.Value) Case 1: myColor = 3 Case 2: myColor = 17 Case 3: myColor = 19 Case 4: myColor = 22 Case 5: myColor = 26 Case 6: myColor = 33 Case 7: myColor = 36 Case 8: myColor = 38 Case 9: myColor = 40 Case 10: myColor = 42 Case 11: myColor = 44 Case 12: myColor = 7
I have this code in 1 sheet in one of the books (and all other sheets work fine), and the same code in all sheets in the other book. Both books work the way it's supposed to.
My question, Is it necessary to have the Worksheet_Change event in all the sheets (all sheets act on the code the same way) or is it okay for just one sheet?
Could I encounter a problem if in only one sheet?
I just don't see why I would have to add more size with the code in all sheets if it is not necessary.
I currently have this code in my sheet, and would like to incorporate the second bit of code into the same sheet, but not sure how to do it. At this point, when I just put them together neither will work.
Option Compare Text Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column 12 Then Exit Sub
If Target.Value = "Daniel Amaya" Then Target.EntireRow.Cut Sheets("Daniel").Range("A3").End(xlUp).Offset(1, 0).EntireRow.Insert Target.EntireRow.Delete
I'm trying to find code (I can't write my own yet) that will highlight any cells that have been changed with fill color and bold font. I've searched around the forum and come up with the code below so far. It's not working - when I make a change to a cell and hit enter, it highlights and bolds the cell BELOW the one that changed!
Private Sub Worksheet_Change(ByVal Target As Range) Application.EnableEvents = False With Selection.Font .Name = "Calibri" .FontStyle = "Bold" .Size = 11 .Strikethrough = False .Superscript = False .Subscript = False .OutlineFont = False .Shadow = False .Underline = xlUnderlineStyleNone .ThemeColor = xlThemeColorLight1 .TintAndShade = 0 .ThemeFont = xlThemeFontMinor End With
Private Sub WorkSheet_Change(ByVal Target As Range)
Dim response As Integer
If Range("AD2").Value = "1" Then response = MsgBox("Rental Agreement Does Not Exist. Do you wish to continue entering information for", vbYesNo) If response = vbYes Then MsgBox ("Add") ElseIf response = vbNo Then Range("E2").Value = 0 End If
i need to make a macro that takes workbooks or files and runs them through another macro. i already have the 2nd macro done and it is working perfectly i just need to know how to make the one that finds the other files and runs them all through the macro i already made. My boss said that he will have about 150-200 files to run through this macro.
I have a bit of code someone on this board provided and I want to make it work for two different ranges. If I just paste it, I get an ambiguous name error. How do I make it work for a second range?
Private Sub Worksheet_Change(ByVal Target As Excel.Range) Dim rng As Range Set rng = [A2:A101] If Intersect(Target, rng) Is Nothing Then Exit Sub If IsEmpty(Target) Then Target.Offset(0, 4).Value = "" Target.Offset(0, 1).Value = "" Else Target.Offset(0, 4).Value = Application.UserName Target.Offset(0, 1).Value = Date End If End Sub
Bit of an odd one, but I'm sure it's probably happened before to others. I've just been sent a worksheet to redesign (an audit template) one which I'll be making use of data validation lists (Yes, No, N/A) a fair bit.
What I want to happen is that when the user selects from a list, I'll fire a Worksheet_Change event, which will then run some background calculations to set up the next questions, etc. Problem is, the event isn't firing at all. I'm using the following to test the event...
I wrote a simple script to show/hide certain rows based on the value of a certain cell on my worksheet (cell value chosen by drop down). When I left work last night, everything worked fine. When I returned this morning, the change event no longer appears to be firing. I'm quite certain no one else accessed the file to change the coding, so my only guesses are 1)perhaps some sort of system update was applied in the middle of the night and it messed with something or 2) aliens have blocked our technology in advance of their invasion.
Private Sub Worksheet_Change(ByVal Target As Range) On Error Resume Next
If Target.Address = "F1" Then
Application.EnableEvents = False
Select Case Target Case "150" Rows("13").EntireRow.Hidden = False Rows("14:19").EntireRow.Hidden = True Case "330" Rows("14").EntireRow.Hidden = False Rows("13").EntireRow.Hidden = True Rows("15:19").EntireRow.Hidden = True Case "340" Rows("15:19").EntireRow.Hidden = False Rows("13:14").EntireRow.Hidden = True Case Else Rows("13:19").EntireRow.Hidden = True End Select
I am trying to give the user the ability to hard a enter a value in either of two cells and then the other cell automatically changes to the same value when either cell is changed. If cell A1 on Sheet1 is changed to 20, want cell A1 on Sheet2 to also change to 20. But I also want the opposite to happen, if If cell A1 on Sheet2 is changed to 20, want cell A1 on Sheet1 to change to 20. I put this code on the Sheet1 module, but it doesn't work.
Private Sub Worksheet__Change(ByVal Target As Excel.Range) Dim rWatchrange As Excel.Range Set rWatchrange = ThisWorkbook. Sheets("Sheet1").Range("A1") If Not Application.Intersect(Target, rWatchrange) Is Nothing Then ThisWorkbook.Sheets("Sheet2").Range("A1").Value = ThisWorkbook.Sheets("Sheet1").Range("A1").Value End If End Sub
I have a Worksheet_Change method in my sheet module which has suddenly begun working selectively. I have several target ranges in my worksheet that I need to watch for changes. One range of cells is all pull-down menus (a list of electrical loads through excel's validation), another two cells are looking at the name and location of an electrical panel.
When the user selects an electrical load, the worksheet_change method updates a legend of definitions. When the user enters a new name or location, the method updates similar fields elsewhere on the same sheet.
The problem is, excel has stopped executing worksheet_change when a load is chosen or location entered. It only executes when the aforementioned load and location are deleted. However, the name field triggers worksheet_change just fine!
I have attempted to put breakpoints on the worksheet_change method; Excel does not even execute the method as described above. I've tried breaking on the toggling of Application.EnableEvents (which occurs early on in the execution of worksheet_change). I currently have a global watch on Application.EnableEvents and I'm quite sure it's TRUE before I attempt to trigger a worksheet_change event.
My next step is to create a brand new workbook and copy my spreadsheet and code into it. I'll post the results of that experiment.
I have code the following code that is working great:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub If Not Intersect(Target, Range("C2:C" & Rows.Count)) Is Nothing Then Application.EnableEvents = False If IsDate(Target) Then Target.Offset(0, -1).Value = Month(Target) ElseIf IsEmpty(Target) Then Target.Offset(0, -1).ClearContents End If Application.EnableEvents = True
End If End Sub
But I also need to create the same type of code that will copy the cell entry from column E and paste that data into column A along the data from column B that was created from the above code. This data is a sort of key for a vlookup formula on another worksheet. How do I "nest" this second bit of code into the original code?
I'm trying to find a way to bypass a worksheet_change event. Right now, my code validates if a change has been done to a specific cell ("D13"). It works perfectly, too perfectly actually.
Here is the code I got :
First line of Module 1 :
Public bDeviation As Boolean
On Sheet1 :
Public Sub Worksheet_Change(ByVal Target As Excel.Range)
Working on a simple worksheet_change issue for someone, the thought came, "after this code runs" it would be good if the TargetRange changed to no longer include the rows it had run on already. This way, if you later accidentally deleted/edited a cell that already had data, it wouldn't cause the macro to run again and do the paste job again?
when I use worksheet_change for something so simple to do, it prevents me from deleting cells.
When I try to delete the cell values from A2 (5) and A3 (6), they won't delete unless I delete the value on A1 (True).
Private Sub Worksheet_Change(ByVal Target As Range) Application.EnableEvents = False If Range("A1").Value = "True" Then Range("A2").Value = 5 Range("A3").Value = 6 Else End If Application.EnableEvents = True Exit Sub End Sub
Is it possible to use a named range as part of the Target.Address in a Worksheet_Change event? For example, if I've named cell A1 to be XYZ, can I use something like the following VBA script:
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = Range("XYZ") Then ..... End If End Sub
The above script obviously doesn't work. The only thing I can get to work is:
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$A$1" Then ..... End If End Sub
I would like to be able to use a named range so that I don't have to remember to update my VBA when I insert rows or columns in my worksheet.
I'm using the following code. Basically it formats some cells in row based on the value in the first column of the row.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer Dim RowNr As Integer
If Not Intersect(Target, Range("A1:A65536")) Is Nothing Then For Each cell In Target If Target.Text = "" Then icolor = 0 ElseIf Target.Text = "Row Loaded" Then icolor = 4 ElseIf Left(Target.Text, 14) = "Row not loaded" Then
This works fine, except when I delete a row by clicking on the row number to highlight the row, and then right click to select delete.
The event fires for each cell in the rows, and takes ages to run.
Does anyone have any ideas on how to prevent this from happening? I tried substituting
I've a spreadsheet with each row representing a record of some equipment installation escept for Row #1, which contains the column headers. For each record, Columns A through G contain the installation information,Columns H onwards are for monthly billing purposes(March 07, April 07, etc.). Each cell in Column H onwards contains a complicated formula for billing. Under the row that represents the last installation, there is a Totals Row. Since we are adding installations very frequently at the moment, my goal is to: Using a Worksheet_Change Event,
When a row is inserted into the worksheet, the code tests for
1) If the event is an "Insertion"-if not, Exit the code. 2) If the Target is a row- if not, Exit the code. 3) The row number-if row #2, copy the formulas from the row below. If the row # is less than 2, Exit the code. 4) If the Target Range's row number is > 2, copy the formulas from row above. 5) If the Target Range's row number is => than that of the "Totals", Exit the code.
I've got 2,3 and 4-
How can I test for #1, and for #5, every time a row is inserted, the row # increases. How can I code #5?
I have a user who wanted a spreadsheet to highlight cells containing formulas whenever the formula was changed. (They want the ability to make changes, but want those changes highlighted. They do not want to protect cells with formulas.) I tried to accomplish this with Conditional Formatting but could not figure out a way to do it, so I turned to VBA. I wrote the following routine that is called on the Worksheet_change event:
Sub CheckFormulas(Target As Range, FormulaRange As String) Dim CurCell As Range For Each CurCell In Range(FormulaRange) If Target.Address = CurCell.Address Then Target.Interior.ColorIndex = 3 End If Next CurCell End Sub...................
