I have this code in my worksheet,
Private Sub WorkSheet_Change(ByVal Target As Range)
Dim response As Integer
If Range("AD2").Value = "1" Then
response = MsgBox("Rental Agreement Does Not Exist. Do you wish to continue entering information for", vbYesNo)
If response = vbYes Then
MsgBox ("Add")
ElseIf response = vbNo Then
Range("E2").Value = 0
End If
I have a spreadsheet with 2 sheets (Railcar Record & Switch) They both contain the same column names and will contain the same data. I want to do, is to have the user type in the Railcar # on Switch, and have all the information in the columns on this sheet fill in. As you can see and as previously mentioned, the information is all stored on the Rail Car Record, I just need to isolate certain information on the switch sheet.
View 2 Replies View RelatedI have data that I'm copying from a PDF and pasting in an excel sheet. The data that I need is mostly in groups of three rows, but sometimes there will be two extra rows under each data group. The two extra lines are extremely similar to two of the lines of data I need, so I can't think of a way to isolate them with a filter, and each document is 15,000 rows long, so doing it manually doesn't seem to be an option.
One of the lines of data that I need always starts with a dollar sign, so my thought is I could cut those so there would be a blank cell, and then I would just need a way to select the two rows immediately above every blank cell, leaving the two data rows I don't want below every blank cell.
I have the following examples of text in column A
Race 1 - NORTHAM FEED & HIRE MAIDEN STAKE (SKY2)
Race 12 - NORTHAM MAIDEN STAKE (SKY2)
I want to isolate the race numbers so thy are in column P as follows
1
12
I have a For loop, its an array with 5 file names in it. The loop checks for the files in the path, and if the file is there it places the file in the corresponding sheet in the workbook. If it is not, I get the option to browse for the file. Originally all 5 files were required, however now the requirements changed and only 4 are required the last file "byband.csv" is not required. So they want the option a message box telling the user the file is not required they can browse or keep going.
I worked out the second part but only by taking "byband.csv" out of the loop and writing a separate procedure for it, I wondered if in my original procedure I could isolate "byband" and if not found go to another part of the procedure. Basically, I needed to do the following:
If the file in the array byBand.csv is not found, Then:
vmbProceed = MsgBox(strFifthImportFile & strMessage, vbYesNo + vbQuestion, strTitle)
If vmbProceed = vbNo Then
Exit Sub
Else
go to Line 1 in the procedure below.
Code:
Sub import_Employee_Data()
'This is Step 1 when the frmDataImportSplash is activated.
'This procedure imports the byEmployee.csv sheet. The procedure checks if the file is
'in the same directory as the template. If the file is not there, a browser window appears to allow the user
'to browse for the missing file. A series of message boxes guide the user through the process and
'verifies that the user picked the right file. The user can cancel the import at any time.
Dim strPath As String
Dim strFirstImportFile As Variant
[Code] .........
I have an address column in which multiple strings of text and numbers have been combined. I need to isolate each string and place it into its own column.
Column looks like this....
ADDRESS
615 NE CORDER AVE, LEES SUMMIT, MO 64063
2661 NW LEES SUMMIT RD, LEES SUMMIT, MO 64064
104 SE 4TH ST, LEES SUMMIT, MO 64063
4944 SW GULL POINT DR, LEES SUMMIT, MO 64082
3904 SW PRYOR RD, LEES SUMMIT, MO 64082
329 NW BRADFORD ST, LEES SUMMIT, MO 64064
They need too look something like this...
No.
Suffix
Street
Type
City
State
Zip
615 NE Corder Ave Lees Summit MO 64083
The problem I'm having when trying to use a "left" or "right" formulas is some of the strings have different positions in the whole string itself (does that make sense?) (some addresses have 4 characters, some have 3, so on....)
I want to isolate text on either side of dashes ( " - " ) that occur either 2 or 3 times in a single cell.
Example:
Apples - Pears - 99 - 100+ years
Bananas - 56 - 57+ years
In particular, I would like to capture the "99 - 100+ years" and "56 - 57+ years" text on its own.
I tried this " =SUBSTITUTE(A1, "*- ", "", 1) but it doesn't work
With worksheet_change(byval target as range), is there a simple way to focus on only the row that has changed? Currently I have a 'do while' loop that looks for x until it is blank. That is causing a delay that I am hoping to avoid by only changing one row.
Also, any direction on resoures that shed more light on the front half of macros (dim, range, where you want the macro to look and act, etc)
Can you have more then one worksheet_change event for the same worksheet and if not what is a work around. I have two that I want to use but only the first one works. Both work if they are the only one, but when they are both present the second one does not work.
View 9 Replies View Relatedi have some code that is set in the Worksheet_Change routine.
For some reason the code is not activated when a change is made on the relevant sheet.
I can type into boxes and hit return amongst other things and the code simply wont fire, is there a reason for this (am i missing something)?
my code is...........
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
Application.DisplayAlerts = False
If Range("r_PatientType") Sheets("Data store").Range("store_PatientType") Then
If Range("r_PatientType") = "Paroxysmal" Then
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Target.RowHeight = 16
End Sub
[Code]....
How to Use 2 Private Sub Worksheet_Change
Worksheet_change for more than one cell
I have the code
I have a problem with the vba script attached. RoyUk very kindly helped me with this code a few weeks ago.
What I have is an example of some worksheets. I want the person to input into the first sheet their name & period and Y for whether they have checked the balance or not.
The problem I have is that if I fill in all those three details straight away it copies through wrightie, 5 and Y through all the pages. I don't want Y (balance check to copy through) as I need the user to manually input that.
It does work though if I put in wrightie, 5 and then check the other pages to see if it's copied through and then go back to the first sheet and put Y, it seems to work then.
I have two workbooks that have the following
Private Sub Worksheet_Change(ByVal Target As Range)
Dim myColor As Integer
With Target
If Intersect(.Cells, Range("v:v")) Is Nothing Then Exit Sub
If IsEmpty(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub
If Not IsDate(.Cells) Then r.Offset(, 1).Interior.ColorIndex = xlNone: Exit Sub
Select Case Month(.Value)
Case 1: myColor = 3
Case 2: myColor = 17
Case 3: myColor = 19
Case 4: myColor = 22
Case 5: myColor = 26
Case 6: myColor = 33
Case 7: myColor = 36
Case 8: myColor = 38
Case 9: myColor = 40
Case 10: myColor = 42
Case 11: myColor = 44
Case 12: myColor = 7
I have this code in 1 sheet in one of the books (and all other sheets work fine), and the same code in all sheets in the other book. Both books work the way it's supposed to.
My question,
Is it necessary to have the Worksheet_Change event in all the sheets (all sheets act on the code the same way) or is it okay for just one sheet?
Could I encounter a problem if in only one sheet?
I just don't see why I would have to add more size with the code in all sheets if it is not necessary.
I currently have this code in my sheet, and would like to incorporate the second bit of code into the same sheet, but not sure how to do it. At this point, when I just put them together neither will work.
Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column 12 Then Exit Sub
If Target.Value = "Daniel Amaya" Then
Target.EntireRow.Cut
Sheets("Daniel").Range("A3").End(xlUp).Offset(1, 0).EntireRow.Insert
Target.EntireRow.Delete
I'm trying to find code (I can't write my own yet) that will highlight any cells that have been changed with fill color and bold font. I've searched around the forum and come up with the code below so far. It's not working - when I make a change to a cell and hit enter, it highlights and bolds the cell BELOW the one that changed!
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
With Selection.Font
.Name = "Calibri"
.FontStyle = "Bold"
.Size = 11
.Strikethrough = False
.Superscript = False
.Subscript = False
.OutlineFont = False
.Shadow = False
.Underline = xlUnderlineStyleNone
.ThemeColor = xlThemeColorLight1
.TintAndShade = 0
.ThemeFont = xlThemeFontMinor
End With
I have created a macro to hide columns depending upon text in specifically identified cells. However, I am getting the error message "Run Time Error 1004 Unable to set the Hidden property of the Range class" with the line in red below highlighted when I debug.
This macro is worksheet specific.
Private Sub Worksheet_Change(ByVal Target As Range)
Select Case Target.Address
Case "$K$8"
If Target = "Actual" Then
Columns("C:J").EntireColumn.Hidden = True
Else
Columns("C:J").EntireColumn.Hidden = False
End If
End Select
End Sub
I have a bit of code someone on this board provided and I want to make it work for two different ranges. If I just paste it, I get an ambiguous name error. How do I make it work for a second range?
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim rng As Range
Set rng = [A2:A101]
If Intersect(Target, rng) Is Nothing Then Exit Sub
If IsEmpty(Target) Then
Target.Offset(0, 4).Value = ""
Target.Offset(0, 1).Value = ""
Else
Target.Offset(0, 4).Value = Application.UserName
Target.Offset(0, 1).Value = Date
End If
End Sub
Bit of an odd one, but I'm sure it's probably happened before to others. I've just been sent a worksheet to redesign (an audit template) one which I'll be making use of data validation lists (Yes, No, N/A) a fair bit.
What I want to happen is that when the user selects from a list, I'll fire a Worksheet_Change event, which will then run some background calculations to set up the next questions, etc. Problem is, the event isn't firing at all. I'm using the following to test the event...
I wrote a simple script to show/hide certain rows based on the value of a certain cell on my worksheet (cell value chosen by drop down). When I left work last night, everything worked fine. When I returned this morning, the change event no longer appears to be firing. I'm quite certain no one else accessed the file to change the coding, so my only guesses are 1)perhaps some sort of system update was applied in the middle of the night and it messed with something or 2) aliens have blocked our technology in advance of their invasion.
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
If Target.Address = "F1" Then
Application.EnableEvents = False
Select Case Target
Case "150"
Rows("13").EntireRow.Hidden = False
Rows("14:19").EntireRow.Hidden = True
Case "330"
Rows("14").EntireRow.Hidden = False
Rows("13").EntireRow.Hidden = True
Rows("15:19").EntireRow.Hidden = True
Case "340"
Rows("15:19").EntireRow.Hidden = False
Rows("13:14").EntireRow.Hidden = True
Case Else
Rows("13:19").EntireRow.Hidden = True
End Select
Application.EnableEvents = True
End If
End Sub
I've been Google-ing for the last 45 minutes and tried to combine them myself, but I'm afraid of breaking it.
I believe the second code was taken from the MrExcel site, I don't remember.
CODE 1:
// Track Changes; updates any/all changed cells with a comment identifying the author, date and change that was made //
Option Explicit
Public preValue As Variant
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Select Case Target.Column
Case Is = 2, 4, 6
Target.ClearComments
Target.AddComment.Text Text:="Previous Value was " & preValue & Chr(10) & "Revised "
CODE 2:
// Whenever a specific range of cells are updated, the adjacent cells update with a timestamp //
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
With Target
If .Count > 1 Then Exit Sub
If Not Intersect(Range("F3:F1000"), .Cells) Is Nothing Then
Application.EnableEvents = False
With .Offset(0, 1)
.Value = Now
End With
End If
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$b$1" Then
For i = 1 To 10
Cells(1, 1) = i
Next i
End If
End Sub
It is supposed to count to 10 when the info in cell B1 changes, i would like to use it as a timer.
Rather than just export and import a module, to import a sheet macro?
I don't quite know what they're called, but basically I have a functional Worksheet_change macro, which is sitting idly in a module. When a separate macro is run which creates new workbooks, It exports that specific module to the desktop, and then the new workbooks all import the module. THat works fine.
But I want all of the new workbooks to get a worksheet_change macro (so a macro that goes into the sheet, not into a module in the workbook)
I am trying to give the user the ability to hard a enter a value in either of two cells and then the other cell automatically changes to the same value when either cell is changed. If cell A1 on Sheet1 is changed to 20, want cell A1 on Sheet2 to also change to 20. But I also want the opposite to happen, if If cell A1 on Sheet2 is changed to 20, want cell A1 on Sheet1 to change to 20. I put this code on the Sheet1 module, but it doesn't work.
Private Sub Worksheet__Change(ByVal Target As Excel.Range)
Dim rWatchrange As Excel.Range
Set rWatchrange = ThisWorkbook. Sheets("Sheet1").Range("A1")
If Not Application.Intersect(Target, rWatchrange) Is Nothing Then
ThisWorkbook.Sheets("Sheet2").Range("A1").Value = ThisWorkbook.Sheets("Sheet1").Range("A1").Value
End If
End Sub
I have a Worksheet_Change method in my sheet module which has suddenly begun working selectively. I have several target ranges in my worksheet that I need to watch for changes. One range of cells is all pull-down menus (a list of electrical loads through excel's validation), another two cells are looking at the name and location of an electrical panel.
When the user selects an electrical load, the worksheet_change method updates a legend of definitions. When the user enters a new name or location, the method updates similar fields elsewhere on the same sheet.
The problem is, excel has stopped executing worksheet_change when a load is chosen or location entered. It only executes when the aforementioned load and location are deleted. However, the name field triggers worksheet_change just fine!
I have attempted to put breakpoints on the worksheet_change method; Excel does not even execute the method as described above. I've tried breaking on the toggling of Application.EnableEvents (which occurs early on in the execution of worksheet_change). I currently have a global watch on Application.EnableEvents and I'm quite sure it's TRUE before I attempt to trigger a worksheet_change event.
My next step is to create a brand new workbook and copy my spreadsheet and code into it. I'll post the results of that experiment.
I have code the following code that is working great:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("C2:C" & Rows.Count)) Is Nothing Then
Application.EnableEvents = False
If IsDate(Target) Then
Target.Offset(0, -1).Value = Month(Target)
ElseIf IsEmpty(Target) Then
Target.Offset(0, -1).ClearContents
End If
Application.EnableEvents = True
End If
End Sub
But I also need to create the same type of code that will copy the cell entry from column E and paste that data into column A along the data from column B that was created from the above code. This data is a sort of key for a vlookup formula on another worksheet. How do I "nest" this second bit of code into the original code?
I'm trying to find a way to bypass a worksheet_change event. Right now, my code validates if a change has been done to a specific cell ("D13"). It works perfectly, too perfectly actually.
Here is the code I got :
First line of Module 1 :
Public bDeviation As Boolean
On Sheet1 :
Public Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim VRange As Range
Dim strName As String
Application. ScreenUpdating = False
Working on a simple worksheet_change issue for someone, the thought came, "after this code runs" it would be good if the TargetRange changed to no longer include the rows it had run on already. This way, if you later accidentally deleted/edited a cell that already had data, it wouldn't cause the macro to run again and do the paste job again?
Anyway, here is the code original
when I use worksheet_change for something so simple to do, it prevents me from deleting cells.
When I try to delete the cell values from A2 (5) and A3 (6), they won't delete unless I delete the value on A1 (True).
Private Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
If Range("A1").Value = "True" Then
Range("A2").Value = 5
Range("A3").Value = 6
Else
End If
Application.EnableEvents = True
Exit Sub
End Sub
Is it possible to use a named range as part of the Target.Address in a Worksheet_Change event? For example, if I've named cell A1 to be XYZ, can I use something like the following VBA script:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = Range("XYZ") Then
.....
End If
End Sub
The above script obviously doesn't work. The only thing I can get to work is:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$1" Then
.....
End If
End Sub
I would like to be able to use a named range so that I don't have to remember to update my VBA when I insert rows or columns in my worksheet.
