NEED ASSISTANCE FOR COLUMNS
Dec 3, 2006
Is it possible if 0 cells are filled with the word “out” in a column D7 thru D15 In work sheet team matches. To run a macro that will look up a column in another sheet A2 to A10 in work sheet Random Picks. And fill column D7 to D15 In sheet team matches with the contents of them cells.
If 1 cell is filled with the word “out” in a column D7 thru D15 In work sheet team matches. To run a macro that will look up a column in another sheet B2 to B9 in work sheet Random Picks. And fill column D7 to D14 In sheet team matches with the contents of them cells.
If 2 cells are filled with the word “out” in a column D7 thru D15 In work sheet team matches. To run a macro that will look up a column in another sheet C2 to C8 in work sheet Random Picks. And fill column D7 to D13 In sheet team matches with the contents of them cells.
If 3 cells are filled with the word “out” in a column D7 thru D15 In work sheet team matches. To run a macro that will look up a column in another sheet D2 to D7 in work sheet Random Picks. And fill column D7 to D12 In sheet team matches with the contents of them cells.
If 4 cells are filled with the word “out” in a column D7 thru D15 In work sheet team matches. To run a macro that will look up a column in another sheet E2 to E6 in work sheet Random Picks. And fill column D7 to D11 In sheet team matches with the contents of them cells.
If 5 cells are filled with the word “out” in a column D7 thru D15 In work sheet team matches. To run a macro that will look up a column in another sheet F2 to F5 in work sheet Random Picks. And fill column D7 to D10 In sheet team matches with the contents of them cells.
If 6 cells are filled with the word “out” in a column D7 thru D15 In work sheet team matches. To run a macro that will look up a column in another sheet G2 to G4 in work sheet Random Picks. And fill column D7 to D10 In sheet team matches with the contents of them cells.
View 9 Replies
ADVERTISEMENT
Oct 13, 2009
i was looking for some assistance in regards to a formula i have used for ranking. i have attached a sample spreadsheet of what i have done so far but struggling to work something so thot id try here.
(Sample WB) Currently i have managed to rank in accordance to column E but as i have alot of 0% i would like to be able to rank the 0% in accordance to the number of work done (column C).
For example i have 62 0% answers and Username Q has actioned 316 jobs with 0 Failures so should be ranked 1st as he has the highest number of jobs.
View 12 Replies
View Related
Apr 12, 2007
I only grasp the basics of loops and not any experience w/ formulas in VBA to date.
For each item in col "I" run this formula (the cell references are relative)
=RIGHT(I6,LEN(I6)-FIND(" ",I6))
I am only at this point so far:
Sub ItemName()
Dim wb As Workbook
Dim ws As Worksheet
Dim i As Integer
Dim LRow As Long
Set ws = Workbooks("TGSItemRecordCreatorMaster.xls").Worksheets("Record Creator")
LRow = ws.Cells(Rows.Count, 9).End(xlUp).Row
For i = 6 To LRow
=RIGHT(I6,LEN(I6)-FIND(" ",I6))
End Sub
The basic function of the loop is to Delete the first term of each cell in the range including the first space.
example:
Enjoi Barletta Deck
Resulting in:
Barletta Deck
View 9 Replies
View Related
Aug 4, 2009
The will eventually end in a series of pivottables. I am currently at the step where I need to add vlookups. This is for an inventory management report that averages 20,000 rows and 20 columns of data. I add a few columns (using vlookups) to increase visibilty to the operations dept.
The first thing I need help with is creating the VBA language for using a vlookup table from another workbook that pastes the vlookup formula every cell to the bottom of the data
Then I need to utilize an IF formula for one column that says IF c2 is blank use vlookup-formula1, and IF it is not blank use vlookup-formula2, and then paste at every cell all the way down.
I hope someone can help, and I hope I didn't write too much to where everyone will skip pver this thread.
I am currently to this state, and ready to continue.
--------------------------------------------------
Sub OHRTODDI1()
'
' OHR1 Macro
' Macro recorded 7/22/2009 by iahopbxm
'
' Keyboard Shortcut: Ctrl+o
'
' Sort and Add column Headers
Cells.Select
Selection.ColumnWidth = 9.43...........
View 9 Replies
View Related
Jun 15, 2007
I get a "#value" error message when I utilize the formula noted below. I seperated it into distinct sections so that it is easier to view. Basically, what the formula is doing is determining whether if two values are the same, then take the absolute difference of the average of other values ,excluding one of the previously noted values, and compare that difference to a different parameter. If the difference does not exceed the parameter, then calculate the difference; otherwise the ending result is zero. Pls. note that the error seems to occur when I input the fifth section into the formula.
=IF(K23="","",IF(AND(K23=E23,ABS(B23-AVERAGE(F23:J23))>B20),B23-ABS(AVERAGE(F23:J23)-B20),
IF(AND(K23=F23,ABS(B23-AVERAGE(E23,G23,H23,I23,J23))>B20),B23-ABS(AVERAGE(E23,G23,H23,I23,J23)-B20),
IF(AND(K23=G23,ABS(B23-AVERAGE(E23,F23,H23,I23,J23))>B20),B23-ABS(AVERAGE(E23,F23,H23,I23,J23)-B20),
IF(AND(K23=H23,ABS(B23-AVERAGE(E23,F23,G23,I23,J23))>B20),B23-ABS(AVERAGE(E23,F23,G23,I23,J23)-B20),
IF(AND(K23=I23,ABS(B23-AVERAGE(E23,F23,G23,H23,J23))>B20),B23-ABS(AVERAGE(E23,F23,G23,H23,J23)-B20),
IF(AND(K23=J23,ABS(B23-AVERAGE(E23:I23))>B20),B23-ABS(AVERAGE(E23:I23)-B20),0))))))))
View 9 Replies
View Related
Jun 19, 2008
I am trying to use excel to forecast budget expenditure for the fiscal year, using actuals from months past + unknown (future months).
I have this formula in cell G2: =IF((worksheet A!G70>0),F2,IF((B2
>D2),(B2-C2)*F6+F2,IF((B2
View 9 Replies
View Related
Aug 4, 2009
Current Formula
{=IF(AND(G144>0,F144:F173
View 9 Replies
View Related
May 1, 2006
the scenario is a spreadsheet for adding call centre operators evaluations (1 being worst and 5 being best) from the clients. in the spreadsheet, i need to create a function to add a quick evaluation based on the operators score from the client
so if the score is 4 or higher it would read "good - improving"
and if it is less than 4 "poor - improving"
i think this is just a simple IF question...but i have forgotten how to do it
View 3 Replies
View Related
Jun 13, 2006
Im doing a year nine maths project and need a little help with excel. This is my first time using macros/VBA. I have been playing around and have figured out a few things. I was asked to produce a game using excel, i am doing a kind of "racing" game with betting, i have the racing and most of the betting all working fine. I need to know how to get a message box to appear when the total of a cell reaches 0.
View 5 Replies
View Related
Dec 8, 2008
I was wondering if someone could help me generate a Macro to do the following:
I have a sheet with the following characteristics.
Column A, rows 8-15 contain headers
Column A, rows 17-24 contain headers
Column A, rows 26-40 contain headers
Column B to CV, row 6 may or may not contain an "X"
Column B to CV, rows 8-15 & 17-24 & 26-40 may or may not contain the various data
I need a macro which does the following on the press of a button located somewhere on the sheet:
Generate a .TXT file in the folder C:Test with the name "Test_YYYY_MM_DD_HH_MM_SS_Full.txt" which uses the system time and date to fill in the values In the TXT file the following data should be created: ....
View 7 Replies
View Related
Apr 3, 2007
i try to lock cells in the area the VBA code affects. My goal is to actually have affected cells by this VBA code lock immediately after anything is entered in the affected cells. Area needing Debugging is in the If - Else portion. My worksheet will be protected.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim LLoop As Integer
Dim LTargetRange1 As String
Dim LDestRange1 As String
LLoop = 10
While LLoop <= 1000
'Link column B to A
LTargetRange1 = "B" & CStr(LLoop)
LDestRange1 = "A" & CStr(LLoop)
If Not Intersect(Range(LTargetRange1), Target) Is Nothing Then
If Len(Range(LTargetRange1).Value) > 0 Then
Range(LDestRange1).Value = Date
Else
Range(LDestRange1).Value = Null
End If
End If
LLoop = LLoop + 1
Wend
End Sub
View 7 Replies
View Related
Jan 7, 2010
I'm trying to do a few things actually. I am somewhat a newb at programming, although I do understand how C++ and the coding works within Excel. To me, it's like the English language...knowing all of the vocabulary and formatting it right is important. If I don't know the vocabulary, I don't know what options I have.
This tool is being used in the call center I work in. It is to help eliminate repititious information used to notate accounts. I have attached a picture of what the tool looks like so you can have a better idea of what I'm working with. Here are a list of things I'm trying to do which I have searched and not found answers to:
1. I am trying to use a middle mouse scroll to scroll through validation list. This list information is located on a different locked tab. Basically, I have a few rows where a drop down selection can be made and it would be easier to scroll rather than manually moving the slider within the validation list.
2. As you can see, this "tool" an employee and I have created has many buttons. What I would like to do is to be able to click a button on the right and have it "stack" text within a single cell. In other words, if I click the button once, the text may be entered into the "actions taken" cell. If I click another button, I can have the option (or maybe a little "+" next to the button) to add this button's information to the end of the information already entered within the "actions taken" box. I've tried recording and using the keyboard and selecting "end" and then having the text added, but it didn't work. I've seen "loop" VBA code, but I don't want something to repeat, I want it to stack in the cell when clicked manually.
I'm sure there is a way to make the tool much better using VBA code and not use Excel, but I don't have an extensive knowledge of Excel to do something like that. I'm a very fast learner and understand how the coding works, so if you have an idea which may help, and you understand what I'm trying to do here, please provide your .02.
Basically, it's used so the Customer's name and phone number are entered manually, and then just about everything else is automated by the use of the buttons on the right. If I could get the 2 above options to work, it'd be perfect. I just figured out I could eliminate screen flicker and hide the macros working by using:
View 12 Replies
View Related
Oct 28, 2009
=ROUND(SUMIF($C$26:$C$106,D126, $F$26:$F$106)/COUNTIF($C$26:$C$106, D126), 0). the formula is from a sheet which is used as like a questioning/ skills matrix.
The reference of d126 is a category eg: complaint handling and there might be 4 questions on complaint handling each of the answers being displayed as a number between the cells f26-106. If any of these individual cell results are equal to 0 or 1 then i want the overall answer for the formula to default to "training required" rather than the value it would give.
View 4 Replies
View Related
Feb 2, 2009
I need to create a formula that looks at 2 adjacent cells. If both cells show 'YES' then I need the 3 cell to show 'YES'. If either/both of the 2 adjacent cells are blank then the third needs to be blank.
View 2 Replies
View Related
Oct 13, 2008
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
View 4 Replies
View Related
Apr 17, 2013
I have a workbook that has worksheeets for every day of the month. The data in the worksheet consists of columns (employee #, name, clock in/out times, and break penalty).
What I am trying to do is create another worksheet that searches all the other worksheets for a "yes" in the "break penalty" column and then create a list of all the employees that received a break penalty for the entire month. I would like this to be able to auto populate throughout the month as data is entered and not have to use a filter every time I want to compile this list.
View 3 Replies
View Related
May 4, 2013
I would like to take the data from worksheet1 and put into worksheet2 but limit the length of a list (the real spread sheet has over 100 rows and i would like them in 4 sets of 25 versus the example I provided). Is there an array or macro that would make this work (keeping the formatting)..
Excel 2007
B
C
3
Name
Company
[Code].....
View 9 Replies
View Related
Oct 15, 2013
I have a need to combine multiple columns into a long list of results in 2 final columns. Here is my example...
Current layout with varying number of data points per row...
ColumnA | ColumnB | ColumnC | ColumnD | etc...
example1 | Test1 | Test2 | Test3 | Test4
example2 | Option1 | Option2
example3 | Number1 | Number2 | Number3 | Number4 | Number5
Desired Result
ColumnA | ColumnB
example1 | Test1
example1 | Test2
example1 | Test3
example1 | Test4
example2 | Option1
example2 | Option2
example3 | Number1
example3 | Number2
and so on and on and on until all rows have been filled in down the file...
Is this possible?
View 4 Replies
View Related
Apr 9, 2014
how to set one entire columns text to two different colors based on another columns values. So for example I have column A and B. Column A has two values called Internal and External. Column B is a title table so the entire column is just titles. We'll say it goes for 20 rows if you need a row count. What I am looking to do change the text in Column B to Red for External and Blue for Internal. I tried the conditional formatting and I just can't seem to find the right option.
I'm using Win 8.1, Office 2013.
View 4 Replies
View Related
Dec 30, 2008
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
View 2 Replies
View Related
Feb 20, 2009
I have four columns of data, as follows:
label 1, value 1, label 2, value 2
I need to create a formula in the fith column that for each line will tell excel to:
look for entry in 'label 1' in 'label 2' if there is a match, then subtract value 1 from value 2, display result.
I have tried doing this with SUMIF but am getting nowhere fast....
View 7 Replies
View Related
Dec 5, 2012
I have been researching this for 3 days and I cannot find a solution. I have City, State information in A1. I also have City, State information in B1. I need to put them into City (D1) and State (E1).
View 4 Replies
View Related
Mar 3, 2014
It's quite easy, I am trying to do a droplist (that's easy) but I want that drop list to take infos on 2 different columns and fill the 2 columns I want in the main sheet (see attachment)
On tab 'dealers' I have dealers name and account numbers. On tab 'Mileage' I have a cell call "NAME' and a cell call 'Accnt #/NB'. Here is what I want to do:
On sheet 'Mileage' I want to choose from a drop list a dealer name and I want Excel to populate the cell "Accnt#/NB" automatically by chosing the account number that is appropriate to the dealer choosen which is column 'B' in the dealers tab.
View 2 Replies
View Related
Feb 21, 2009
what I'm after is a macro to check the contents of Column 'A' against column 'B' and display any duplicates in Columns 'C' & 'D'.
N.B. The headings of Columns C & D are :-
C = Value Found in Column A
D = Value Found in Column B
Any duplicate entries logged in columns C & D should be listed in C2,C3,C4....C20 and D2,D3,D4......D20 etc (in effect creating two new lists)
View 5 Replies
View Related
Apr 23, 2014
I have file with so many columns and i want to keep only columns i want.
Data
genredyellowgreenwhiteblue
1aaggttccbb
2aaggttccbb
3aaggttccbb
4aaggttccbb
5aaggttccbb
expected
genredwhite
1aacc
2aacc
3aacc
4aacc
5aacc
for example here i want to keep only gen, red and white columns only out of columns what i have in my data. I have so many columns in my original data but here i given just small example. How to proceed with macro or any other way because removing manually taking long time for me.
View 6 Replies
View Related
Apr 30, 2014
I have a spreadsheet with 10 columns which are for tags for products. Some columns are filled in for 10 products and some are not. For instance, product 1 has 7 tags while product 2 has only 2 tags and so on. Now what I am looking to do is combine all the tags for each product with a "," inbetween each one. The problem is if I just use a simple =A2&","&B2&","&C2 etc formula is that if there are only 2 tags then I get 8 ","s. I also tried it with an IF statement but by the time I was done nesting items I became cross eyed and said there has to be an easier way to do this.
I have create a spreadsheet with the data and the result that I typed into the "result" column.
View 3 Replies
View Related
Jul 10, 2009
I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
Scenario 1-AIF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR…
Scenario 1-BIF the number of days difference is MORE than 7 days, highlight the cells in the "Vacation Ended" column and "Number of Days" column GREY..................................
View 2 Replies
View Related
Jan 5, 2010
I've got some time values in an Excel Sheet in the format hh:mm:ss. I need to split them into columns (including the colon) like below:
hh: | mm: | ss
I can do this manually using text to columns but when I use text to columns in my macro, it automatically changes the time format to h:mm:ss PM
View 2 Replies
View Related
Aug 6, 2009
Example:................
The key point is that I have over 400 columns grouped in three, offset by one row down for each (this is due to a different formula I have working). Each column is 60 numbers long (not including empty cells above data). I want to copy all of these columns into a single set of three columns on another sheet (Sheet2). (These will be the fifth, sixth, and seventh columns, E, F, and G. If it would be simpler, I could simply copy the third of each set of columns on Sheet1 (C, F, I) to column G of Sheet2. Then there would be a total of 144 columns being copied (60 numbers per column).) All of this copying has to be values-only as the original columns consist of formulas referencing outside cells. Sheet2 should look like this:.............
View 7 Replies
View Related
Nov 15, 2009
How do you make the Autofill function increment in blocks, e.g. instead of increment 1,2,3 increment 1,8,15 inthe following example: I have a 2 worksheets, one with days of the year across columns and values down rows, and another that summarises the sum of the corresponding days in weeks, so I have 365 columns in sheet 1 and 52 columns in sheet2. Everytime I update the sum range i cannot autofill it in the summary worksheet, as A1:G1 autofills to B1:H1, but I want it to increment to H1:N1.
View 3 Replies
View Related
