Name Sheet With Two Cell Values
Nov 3, 2009
Working in one workbook, I am copying a sheet (sheet 1 = IR Master) to the back of the workbook and I need to rename the copied sheet / tab with values from two cells (L1 & M1) on the copied sheet and save the workbook.
The sheet / tab names will change each time another sheet is saved to the back. The names will look like this 0566-100, 0566-101, 0566-102, etc. with L1 = 0566 and M1 being the sequential # that changes, making each sheet copy unique. The other copying and etc. are working fine but I cannot crack the dynamic sheet / tab renaming and save at the end.
View 2 Replies
ADVERTISEMENT
Jun 3, 2009
i have a workbook with two sheets. lets just call them sheet 1 and sheet 2. on sheet 1 i have data for employees and their current wages and other info. on sheet 2 the data is for compensation scale on three separate columns.......
in order for me to automatically get the data from (sheet 2 B3) the formula for sheet 1 E1 would be: ='Sheet 1'!B3. how do i formulate the equation so that i can do ='Sheet 2'!(C1)(D1)?. in other words i want to specify the column and row from the values declared in sheet 1 column c and column d respectively.
View 4 Replies
View Related
Apr 11, 2014
I am trying find a match from multple "text" values.
The values I'm using are flight numbers from sheet "Indiv case" in column (range H2:H51). The flight number could occur multiple time in the column.
The associated flight number sheet "Code & categories" in column (range H2:H257) are associated with the last port of embarkation (range I2:I257) in "Code & categories" sheet.
I need to copy & past the name of the Last port of embarkation from sheet "Code & categories" into sheet "Indiv case" adjcent to the flight numbers in column (I2:I51).
Example: Sheet "Indiv case" from Column (H2:H51) Fligh number Data: UA863, VA4148, EK432, BA15, BA15, VA98, QF8, AC33 etc Using these value from "Indiv case" from Column (H2:H51) search and match valuse in "Code & categories" in column (range H2:H257)
If match found copy valuse from sheet "Code & categories in column (i2:I257) in to sheet "Indiv case" into column (I2:I51) Last port of embarkation".
H2;H257, I2:I257
Flight, Last Post
3k111, Singapore
3k131, Singapore
AC33, Vancouver
Copy and Past "Last Port" into sheet "Indiv case (I2:I51) adjcent to matching flight code.
View 1 Replies
View Related
Apr 2, 2007
I want to tie the values of some cells on Sheet 2 to what's put in into corresponding cells on Sheet 1. Example
If Cell B3 on Sheet 1 has the string "B off" put in, Sheet 2 should automatically get "R1" in cell B12, "B off" in cell C12 and "ID123456" in cell D12. If cell B3 on Sheet 1 is empty, B12:D12 should be blank.
View 4 Replies
View Related
May 18, 2006
Lets say I have sheet 1 and sheet 2 and when I write data into sheet 1 (when cell changes) the data must also be inserted in sheet 2 at first empty row
View 5 Replies
View Related
Mar 5, 2009
I have approximately 100 sheets in a workbook. I want to set the value of cell C5 to same exact thing for every sheet. Is it possible to do this without manually going into each sheet and pasting the code?
View 3 Replies
View Related
Nov 29, 2008
I would like to be able to copy the values of certain cells to another worksheet if a certain condition is met. In return - I would also like to delete the information that was copy to the new worksheet if the condition has changed.
I realize I can just filter out the data to get the information that I need but, I am creating this spreadsheet for several sales people to use and some are not to diverse on excel.
View 9 Replies
View Related
Mar 29, 2007
I am trying to allow for a cell selection to initiate a macro that would take the top cell in the current column and most left cell in the current row and placing those values into the names of the workbook and sheet that I want to move to.
I am tyring to allow for my users to drill down into data via selecting the cell in question that is referenced from another workbook and sheet. I want to place the value of the cell
= most left cell in current row - 1-1 to be placed in Active.sheet"1-1".select The work bood would pull the value from the most top cell in the current column and place that value in Activeworkbook.place here.select.
View 4 Replies
View Related
Jan 7, 2010
I have two sheets - one work sheet and the second - database with existing entries. Going by visual example below, I need the column C of the work sheet to automatically populate with the data pulled from the database sheet. For example, C4 on the Work sheet should find both values "Bike" and "Green" in one row on Database sheet and return the corresponding value 44444 from F97. The work sheet cells in the row C should remain empty if no match found on the database sheet.
Sheet 1 (Work sheet)
-------A--------B---------C
1---Auto-----Red
2---Auto----Green
3---Bike-----Red
4---Bike----Green
5---Bike-----Blue
Sheet 2 (Database)
-------A--------B---------F
12---Auto---Red----11111
37---Auto--Green---22222
85---Bike----Red----33333
97---Bike---Green--44444
102--Bike---Blue----55555
View 2 Replies
View Related
Sep 23, 2008
The macro below renames the current sheet to the cell value of D4:
Sub Rename_Sheet()
With ActiveSheet
.Name = Range("D4")
End With
End Sub
What can i do to the code above so that it will rename the sheet based on 3 cell values instead on only 1 value?
I want the end result to look like this with x's between the values:
D4xD5xD6
View 9 Replies
View Related
Aug 17, 2014
I am having trouble creating a macro that renames all excel sheets using cells on Sheet1.
See attached, I want to rename all excel sheets (renamed as "1", "2", "3"....."50") as "9999", "10000", "10001"..."10045", found in Sheet1, renamed as "Base". I will change the cell values everyday (range Base!A5 to Base!50) - and will rename all the sheets again.
Before: before.jpg
After: after.jpg
View 2 Replies
View Related
Jan 31, 2014
How to do this:
I have many sheets called;
Input Jan
Input Feb
Input ....
Meaning 1 for each month.
I have another sheet where I want a formula that can
..............................................JUL
CapEx.................................... EBITDA...............................EBITDA %
"=('Input Jul 2014'!$BI$3)/1000"
The "Jul" which stand for July, it is possible to have a formula where I can have certain text in a formula that is based on the value in B1 (In this case, B1 being JUL in bold writing.)
Like this;
=('Input &B1 2014'!$BI$3)/1000
Or must I manually go in and replace all formulas for each month?
View 4 Replies
View Related
Jul 24, 2013
i want to update values fon an excel sheet on a month by month basis. So i have jan to dec folders and excel sheets under each folder , i want to update my monthly forecast sheet based on the numbers in the folder I want to just change the cell in my monthly forecast sheet to Jan or Feb and the values should be pulled from the closed excel files in the monthly folders. I tried concatenation but it gave me #REF .. Is there a way to do it other than using "pull" ??
View 1 Replies
View Related
Aug 16, 2014
I have two sheets: sheet1 and sheet2.
In sheet2 I have a column "C" called addresses and in that column I have actual cell addresses such as $J$740, $H$756, etc., all referring to cell locations in Sheet1.
In sheet1 in column "B" are names.
I would like to be able to return the names from sheet1 column "B" to column "G" of sheet2 that belong to the cell address from column "C" in sheet2.
Is there an Excel formula or vb script that will do this?
I tried "=INDIRECT("sheet1!"&C2)" but all that did was return was is written in the cell address (for example $J$740) but what I want is the corresponding name in column B.
View 4 Replies
View Related
Mar 17, 2014
This is also in sheet1 module ( It cuts the respected row and pastes in sheet2 when date/time is populated in column 14 by double clicking).
[Code]....
View 3 Replies
View Related
Feb 18, 2009
I want to set up a few workbooks with 11 sheets. Sheet 1 will in effect be an index, with True or False values in say cells D5:D14. The True/False values will be generated by form control check boxes in some of the workbooks and by IF(TODAY()>xxxx formulas or similar in other workbooks.
I then want to be able to hide or unhide sheets 2-11 based on the True/False values in cells D5:D14 in sheet 1.
View 7 Replies
View Related
Apr 11, 2014
I'm creating a workbook to keep track of my utilities payments, one sheet for one utility and so on. I like to copy two cells from each sheet to another one to keep me updated of the amount to pay and the date. an example: column A with text, if text "NEXT" appear in column A, copy the value of two cells (at columns B & C) at the right of "NEXT" to another worksheet, if that possible? Below is a photo as an example:
excel.jpg
View 5 Replies
View Related
May 26, 2014
Currently I have it setup to copy rows to a sheet "Report" based on a single cell value. But now I need the same thing but have it copy the rows based on 2 cells values to sheet "Report". So for example I wanted to copy and paste each row in my workbook that contain values in Columns N:N that contain the value "Test" and in columns AB:AB that contain "1".
Sub copyagain()
Application.ScreenUpdating = False
Dim sh As Worksheet, findThis As String, fAdr As String, fLoc As Range
findThis = "1"
[Code]....
View 9 Replies
View Related
Jun 4, 2014
I'm trying to create a macro that when run, scans Row 12 (only after column E), Finds the first empty cell, then inserts the cell value from Sheet4 CellE8. Then the hard bit begins. I need it to insert cell info in all the cells below it, from different locations...
For example
A
B
C
D
[Code].....
In the above sheet, I need it to go to cell D2 and insert the values from Sheet4 CellE8, Then proceed to D3 and insert data from Sheet3 D4, then to cell D5 and insert data from Sheet1 A7, etc etc
I dont mind doing each cell individually, but they will always be in the same column (and row 2 "Value" will always be the one that determines the next empty column).
View 1 Replies
View Related
May 13, 2013
Here's the data table being referenced
Rank
Week Ending
Name
Value
1
1/1
Apple
100
[Code] ........
Now on another sheet, I want to return the top two 'Name's and their values like below:
Name
Value
There is a fluctuating amount of rows in the first table, too. So what formula can I use to return the correct names and values on another sheet?
I'm thinking it will use some form of concatenate for the first and use a sumifs function for the value column..
View 1 Replies
View Related
Dec 4, 2008
I have this script (below, Krishnakumar orignally provided this script).
I'm trying to edit it to add cell values from cells C16 and E16 along with the worksheet name it displays in listbox2. So lets say worksheet "rollover" is the sheet being displayed in the listbox2.
I would like for it to look something like this:
rollover TT:'data from cell C16' TA:'data from cell E16'
Public FilePath As String
Public dic As Object
Public oWB As String
Public oWS As String
Public aWS As Worksheet
Private Sub CommandButton1_Click()
Dim i As Long, wb As Workbook, n As Long
With Me.ListBox2
For i = 0 To .ListCount - 1
If .Selected(i) = True Then
oWS = .list(i)
Set wb = Workbooks.Open(FilePath & oWB, UpdateLinks:=0)
wb.Sheets(oWS).Activate
Exit For
End If
Next
End With
End Sub
View 7 Replies
View Related
Feb 22, 2008
I have a spreadsheet containing a list of key fob numbers, key numbers, etc. I have 3 userforms with different for different options, i.e. Key fob no. search, key number search, room number search. I have set up the code for each of the userforms to search for the information entered in the textbox and then lists the info in the listbox which I can then click on the one of the listed items to take me directly to the place in the spreadsheet.
However since there are a range of different key numbers per key fob, I would like to know what code I can use to allow a range of information such as the key number and room number, etc to be displayed in the same listbox as the Key fob number i searched for.
Here is my code for one of the Userforms:
Option Explicit
Sub Locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
With Sheet1.UsedRange
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
I cannot attach a example of my form since the site seems to have a limit on the size of the upload and my part of the file compressed in zip format is still at 168kb.
View 5 Replies
View Related
Oct 3, 2012
I have been trying for months to get this to work by altering code from similar requests I've hunted down on google to no avail.
I am looking to have a "Master" sheet that is populated by data from 30+ individual excel workbooks. Each workbook is contained on a server in a directory "O:JobsJobs In Progress." In that directory are subfolders (named in sequence "C12000 Job1", "C12001 Job2", etc) which contain the actual workbook (Named according to number ie. "C12000 Jobinfo").
I would like this "Master" to automatically pull specific values from each C1200* workbook and paste them in a designated cell so that I can quickly look at specific information contained in each workbook. Each C1200* workbook is constructed the same way.
Short Example of C1200* workbook in which data will be pulled from:
Job Number
C12000
PM
Abe Lincoln
Foreman
Thomas Edison
Contract Date
1/1/10
View 1 Replies
View Related
Nov 28, 2013
The table on Sheet 1 is being used a record system for history of each lifting equipment we mobilized to our client for rental. The Door No. (Column A) is a name for each equipment. The Date Mobilized is the date when equipment left our premises and started working on site and Date Demobilized is the date when equipment went back to our yard.
To explain my requirement, refer to the first 7 rows indicates that the Door No. ATC0005. It was mobilized 7 times but demobilized 6 times. Meaning that the equipment is currently deployed because the last mobilization dated 01-Jul-13 doesnt have an corresponding data of Demobilization. My first requirement is to have a filter where in it will show the list of currently mobilized equipment. In that case I just go to Date Demobilized and filter it by only showing the blanks.
My second requirement is to know how to filter to only show the available equipment. I was able to analyze it this way: For example we take a look at the history of FLD0001, it has 5 Mobilization Date and 5 Demobilization Date. So i need to know a function to filter a Door No. that has the same number of Mobilization Date and Demobilization Date. My first solution is to just filter the Date Demobilized to not show blanks hence it will show all equipment that has the same number of Date Mob. and Date Demob. But my exact requirement is to have a real time report on a separate sheet (refer to Sheet 2).
Sheet 2 is report for equipment status. Under Equipment (Column A) are the list of equipment. Using the data available on Sheet 1, the cells under Client (Column B) should be filled up either "Available" or "Deployed".
Lastly, for all Deployed equipment only the Client Name should also be retrieved on the report on Sheet 2.
filter values.xlsx
View 14 Replies
View Related
Feb 20, 2014
I'm trying to copy the cells from a sheet and transfer only the values to other sheet.
I did it via code and it worked fine, except for the dates. In the new sheet the months and days are swapped.
The original date is composed via the concatenate function, since it gets inputs (day, month and year) from the user in different cells. It's in the format D/M/YYYY (examples: 4/2/2014, 10/12/2013). I believe the excel interprets it as Text, even if I formated the cells to Date.
I think it may have something to do with the default format in different countries. Here in Brazil we use DD/MM/YYYY, but my Excel is in english and in US the format is MM/DD/YYYY, am I right?
View 2 Replies
View Related
Dec 14, 2012
Below is the code for completing Sheet 1 using various comboxes on a User form. There are only 15 lines to which values can be entered on sheet 1. After the 15 lines have been completed, I would like to begin adding new data to sheet 2. However, I'm not really sure where to begin in terms of setting up a counter and then calling sheet 2 once the counter hits my limit. Sheet 2 is exactly identical to sheet 1 in layout and also has 15 lines.
Private Sub btnAdd_Click()
' This button will add medication info to excel worksheet
'RowCount will help find next empty row
[Code]....
View 1 Replies
View Related
Mar 11, 2013
Possible to look up a value from one excel sheet in another sheet and then return multiple values in the first sheet
For example the following is a sample of sheet 1
NSV Code
Item
12
OLANZAPINE
54
ROPINIROLE
And the following a sample of sheet 2 :
Nsvcode
Item
Division
Speciality
Qty
12
OLANZAPINE
CLINICAL
CS
10
[Code] .....
I want to lookUp the NSVCode from sheet 1 in sheet 2 and return the speciality and qty values in sheet 1 as sheet 2 contains a lot of info I do not require and sheet one also contains various pricing calculations I also require.
View 7 Replies
View Related
Apr 8, 2008
I have to match table column name with the column name in the sheets and get the values from column 6 in sheet2 if "# of values" in sheet1 matches with "Counter" of sheets for the same column.
if ("Table Column Name sheet1"="Column Name sheet2" then
if("Counter sheet2"="# of Values sheet1" then
return "Total # of rows Sheet2" from same row.
I am using Excel 2003.
Sheet 1 ....
View 10 Replies
View Related
Jul 28, 2013
I have a master list. I want to create an excel sheet that will follows when I key in the code number according to the master list all the rest of the value in the master list will automatically populate accordingly into their respective sequence into the created excel sheet.
Eg.
Master list
A B C D
0001 Lucy 8 Walton primary
0002 Rachel 9 Dermouth primary
The created excel sheet
Code 0001
Name Lucy
Age 8
School Walton Primary
I want to key in the code 0001 and the rest of the value will auto populate from the master list into the created excel sheet. The master list data go in accordance row by row. That means the master list is listed in a sequence where all the related value for the particular code into one row only.
View 14 Replies
View Related
May 9, 2009
how to assign values into arrays. I need to compare two sheet (sh1 & sh2), range a2:c20 using array function and get the duplicate values in sheet3.
View 9 Replies
View Related
