National Insurance Number Validation On Blocks Of Data

Nov 1, 2007

I have a spreadsheet where data is pasted on from spreadsheet supplied by various external companies. One of the main problems we're having when validating the data is an incorrect NI Number and I'm hoping to find a way of getting this automated.

What I would like to do is, when a block of text is pasted into our template, a block of code to look through the selection and check column S for a valid format NI no (eg AB123456C). I have some code (below) that works when changing an individual cell, but nothing that works when pasting in blocks of text.

Private Sub Worksheet_Change(ByVal Target As Range)

stringvalue = Target.Value

statuschange = 0

Application.EnableEvents = False

'Check for text only cells
If Target.Column = 19 Then

View 9 Replies

Formula To Convert Gross Insurance Premium To Net Insurance Premium?

Mar 15, 2014

In Australia we calculate Insurance Premiums usually being a Base Premium, Plus Stamp Duty, Plus Fire Service Levy (FSL) Plus Goods & Services Tax (GST) - there is no GST on Stamp Duty, however Stamp Duty is calculated on the total of Base Premium (+ GST) Plus FSL (+ GST).

See below:
NET TO GROSS i.e. Base plus FSL, plus GST, plus Stamp Duty.
Base PremiumUnderwriter provides
Key in blue box onlyBase785.68
StateSA
TypeMotor
FSL0% 0
GST10% 78.57
Stamp11% 95.07
The total premiums is Total Premium959.32

We want the following formula/calculation to be able to just load a Gross/Total Premium figure and have excel calculate the base premium i.e. Total premium - Stamp Duty - GST - FSL
GROSS TO net

Total Premium
Key in Total Premium00
Stamp duty $- 11%
GST $- 10%
FSL $- 0%
The base premium isBase0.00.0.00

Formulae must allow for changes in % rates above (i.e. 11% stamp duty and 0% FSL may be different in each state and a potential change in the GSTrate) as these differ from each state and we need to show the actual amount of each component i.e. Stamp Duty, GST and FSL in the calculation.

Fire Services Levy (FSL) is calculated on a Base Premium plus GST (10%) - FSL varies from State to State, so we need to be able to input the relevant State % rate, GST is calculated on Base Premium (ex GST) plus FSL (ex GST), Stamp Duty is calculated upon Base Premium (plus GST), FSL (plus GST),

provide the respective formulae so that we can do this calculation ourselves using different rates and Total Premium figures.

View 2 Replies View Related

Medical Insurance Calculations

Jan 6, 2010

If H6 amount is greater than E8 then the answer in F8 will be the same as H6. If not, F8 will be the difference between H6 and E8.

The above will be used for the deductible amount as follows:

If patient A has a $1,000 deductible and the allowed amount for the product is only $250.00, then all of that woudl be the patient responsibility. However, if the patient has a $250.00 deducble and the allowed amount is $1,000 then the patient would only owe the $250.00 deductible.

Is there a formula that can decipher this?

View 9 Replies View Related

Find Centre Of 6 Figure National Grid References

Feb 6, 2014

Is it possible to find the centre point of these 6 figure National Grid References (sample)

345723842214
346094842080
346087842611
346359842379
346502841967

These are point on a map - these points will vary and the number of point will vary too,

View 8 Replies View Related

Creating Spreadsheet Utilizing National Vulnerability Database?

Mar 10, 2014

I am creating a spreadsheet utilizing the National Vulnerability Database (NVD) from NIST.

I am successfully able to import the xml files and have the xsd mapped fine.

My problem is within each xml files for each records(1000s of records) there are sub pieces to certain record parts. I.e. software versions (that will be different per piece of software) however they will always fall under prod vendor

"
"
Excel creates a new row for each of these.

How can I make it only create the 1 row and comma seperate those?

View 1 Replies View Related

Numbering Blocks Of Data.

Nov 2, 2009

I have 250000 lines of data and at the moment they are in seperate blocks of different sizes, and seperated by 5 blank lines.

For Example

112
1523
523
1523

*5 BLANK LINES*

12
23

*5 BLANK LINES*

344
4563

etc.

What I would like to do is give each block a number.

1 112
1 1523
1 523
1 1523

*5 BLANK LINES*

2 12
2 23

*5 BLANK LINES*

3 344
3 4563

The lines in between will come out eventually I just need them there as they are difineing the blocks of data.

View 3 Replies View Related

Set Maximum Number Of Entries In A Range - Data Validation?

Dec 8, 2012

Basically in cells b12:b26 (15 cells) I need to enter the type of item (which is limited to 2 items). I made a drop down list for that range which works perfectly, therefore the user can choose either item 1 or item 2 or blank. However, I need to figure out a way so that item 1 can be chosen a maximum of 10 times in the range, and item 2 can only be chosen 5 times in that same range..

I am assuming that you can't add that condition to the drop down list... So I was thinking of adding an extra column duplicating b12:b26 (c12:=b12 etc...)- and entering a data validation there.

I was going to enter the following:

if item 1 is chose : =NOT(COUNT($c$12:$c$26)>10) &
if item 2 is chosen: =NOT(COUNT($c$6:$c$6)>5).

However, for some reason it doesn't work - it doesn't block the entry if I try to enter 11 item 1s or 6 item 2s.

View 2 Replies View Related

IF Formula Used To Price Life Insurance Policies

Jun 20, 2009

I price life insurance policies and need a formalu for the following new Fund:

If the sum of the first two years of premium added to 10% of that total is equal to or less than 25% of the face amount, the case fits into the general parameter.

Here is what I have, but it isn't working:

=IF((U2+V2)*10%)+(U2+V2))

View 9 Replies View Related

Compare Blocks Matrix Of Data

Aug 29, 2006

I have the follwing data in A1:T17

3,4,7,9,10,11,21,32,33,35,37,41,47,57,60,64,69,72,74,75
4,6,9,10,12,13,15,21,22,31,35,47,49,52,56,63,64,72,74,75
4,6,9,10,15,21,31,33,34,41,42,45,46,47,57,60,68,72,74,78
3,4,6,10,11,13,18,21,30,32,33,35,46,53,60,67,69,74,77,78
6,9,13,16,21,22,31,46,48,49,52,61,63,64,69,70,71,75,78,79
3,4,7,10,14,17,18,21,28,31,33,36,37,43,47,57,65,69,75,80
4,7,13,15,17,25,29,32,37,42,45,47,50,57,60,64,68,71,72,74
3,7,10,11,16,18,28,34,35,43,47,51,52,55,56,57,60,64,71,72
8,9,10,12,16,21,22,28,38,47,49,51,52,53,54,55,64,66,71,72
4,5,6,9,12,15,19,20,30,34,35,38,45,47,54,56,63,65,72,78
5,6,9,12,15,21,26,31,32,43,44,47,64,66,67,68,69,74,75,80
..................

I want to compare the first set of 20 numbers (A1:T1) with the second set (A2:T2) and check how many numbers match. ** If the matched numbers
are >=10 ** then list them to the right of cell W1. In this example, 10 numbers matched are 4,9,10,21,35,47,64,72,74,75. List them in W1:AF1.

Now compare (A1:T1) with (A3:T3). In this example, 11 numbers matched 4,9,10,21,33,41,47,57,6,72,74 list them in W2:AG2.

Now compare (A1:T1) with (A4:T4). 10 numbers matched 3,4,10,11,21,32,33,35,60,69 list them in W3:AF3.

Compare (A1:T1) with (A5:T5). Here only 5 numbers matched 9,21,64,69,75 (Which is ** less than 10 ** - does not match the criteria) DO NOT LIST
this.

Compare (A1:T1) with (A6:T6). 11 numbers matched, 3,4,7,10,21,33,37,47,57,69,75 list them in cell W4:AG4.

.................

Sub Compare()

Dim r As Integer, rr As Integer, c As Integer, cc As Integer, opc As
Integer, opr As Long

opr = 1
For r = 1 To 16
For rr = r + 1 To 17
opc = 23
For c = 1 To 20
For cc = 1 To 20
If Cells(r, c) = Cells(rr, cc) Then
Cells(opr, opc) = Cells(r, c)
opc = opc + 1
End If
Next cc
...............................
Next r

End Sub
The above code runs fine but If I increase my rows from 17 to 1200 it takes 3 1/2 hours to complete. Can it be reduced?

View 9 Replies View Related

Copy Data Range Blocks

Jan 8, 2008

I would like to copy specific cells (all in one block) to another worksheet, then do a bunch of other things with the data (these steps work already), then go back to the original worksheet and copy the next block of data, repeat about 50 times, then stop at the end of the list.

I can't attach a file as I can't get it under the file size limit but the rows to move (just to any worksheet in the workbook, from there I can manipulate and move as required) each time are row 1 plus all those pertaining to each subject group. So for group 1 it would be row 1 plus rows 6 to 28 - for group 2 row 1 plus rows 29 to 51 - group 3 row 1 plus 52 to 74 etc. If I can just get looping through chunks of data and moving them around under my belt

View 5 Replies View Related

Sort Range Data Blocks

May 9, 2008

I have a list of data (as shown below under Input), which I would like to sort them according to their block number (as shown below under Output). The hurdle is the sorting should be able to cater for missing fields. Also, note that the sector can be recurring, that is "P,P,Q,Q", and then follow by "P,P,Q,Q" again.

INPUT
Block No.SectorData
11P19
22P
33P39
41P18
52P21
63P38
75P22
85P24..............................

View 2 Replies View Related

Excel 2007 :: Data Validation Query - Sum Of Two Cells Less Than A Set Number?

Jan 6, 2014

I am wanting to create a validation rule so when two cells are added the together the answer must be less than or equal to 14:00 - otherwise a message box will appear

So for example if H7+I7 gives an answer of 13:00 in J7, that's OK, but if the answer is 15:00, the error box will appear. I know that data validation doesnt work on a cell that already has a formula so I'm hoping to use K7 for the Validation and then hide the column

View 4 Replies View Related

Using Data Validation To Limit Entry Of Number Of Characters In A Cell

Jan 24, 2014

When you want to use Data Validation to limit the entry of the number of characters to a cell does this apply only to the cell that you are entering the characters or can it also apply to a cell that contains a LEN(A1) formula, for instance? Also,does the Data Validation limitation function includes spaces as well? Will the message appear while you are entering the characters (when it has reached the limit) or will it wait until you have hit Enter?

View 1 Replies View Related

Picking Blocks Of Data To Copy From One Sheet To Another

Jul 22, 2014

I have a series of spreadsheets that represent the rosters of teams in a league. At the end of the league season, some teams qualify to advance to a final event, and some do not. I start with a file of all the teams for that level of competition. This list comes from a program that creates it's output in an excel '97-2003 format (and I can't change the way the data comes out of this program). I modify the data a bit by removing data from merged cells and rename that worksheet a 'Raw Data'. In the past I have manually copied and pasted the data for the teams that advance to a sheet called 'Roster Data'. I am hoping there is a way to automate this part of the chore.

There must be 6 blank lines between the team names on the 'Roster Data' tab, but some teams have more members than others, so they are not spaced the same on the 'raw data' tab. Is there a way to select teams from the 'Raw Data' tab and have only the selected teams show on the 'Roster data' tab, AND have the spacing become uniform?

View 13 Replies View Related

Move Blocks Of Data In 1 Column To Rows

Nov 15, 2006

Moving Data And Deleting Blank Rows. I am a complete newbie to excel VBA and require assistance (if at all possible). I have data in the following format in an excel sheet (I have a lot more rows but give an example for two rows)... in 1 column but I wish to separate it (i.e. move data along onto the first row in other columns) and delete blank rows.

For Example:

Col1
AAAA
BBBB
CCCC
DDDD
EEEE
AAAA
BBBB
CCCC
DDDD...............................

View 9 Replies View Related

Sort Records Within Data/Range Blocks

Apr 19, 2008

I have around 50,000 records in a data file within which groups of records are contained in blocks delineated by date/time. e.g.;

A B C D E

10/03/2008 13:15 a 100.0
10/03/2008 13:15 b 2.8
10/03/2008 13:15 c 50.5
10/03/2008 13:15 d 8.6
10/03/2008 13:15 e 32.5
10/03/2008 13:25 75.2 <-----Time change
10/03/2008 13:25 5.5
10/03/2008 13:25 16.5
10/03/2008 13:25 3.5

etc

As you can see, while the file is ordered by date/time in Column A, the values in column E are randomly ordered.

My objective is to maintain date time order but sort the values in Column E into an ascending order within each block. So, for example, using the details above I would want it to look like;

A B C D E

10/03/2008 13:15 b 2.8
10/03/2008 13:15 d 8.6
10/03/2008 13:15 e 32.5
10/03/2008 13:15 c 50.5
10/03/2008 13:15 a 100.0
10/03/2008 13:25 3.5 <-----Time change
10/03/2008 13:25 5.5
10/03/2008 13:25 16.5
10/03/2008 13:25 75.2

Note that there is data in columns B to D which would need to be sorted in line with Column E. So, all records in the block, cols A to E are sorted to give the above order for each time block.

My problem is that I'm not sure whether a basic sort can do the job or whether a macro is needed. I'm using Excel 2003.

View 4 Replies View Related

Clubbing Blocks Of Data For Two Entities In A Column Chart

Mar 11, 2009

Clubbing blocks of Data for two entities in a Column Chart

I need to show graphically the comparison between two LOAN amounts for a Housing LOAn..

I am almost done with the MATH part part of it, however need to compare the results Graphically...

I have two Blocks of DATA primarily: ...

View 9 Replies View Related

Fill Series That Combines Data From 2 Sheets In Blocks Of 10

Jun 5, 2006

I have a spreadsheet with two sheets... Sheet1, and Sheet2, that I use as sort of a staging area to format info before bulk uploading to my product database. The products I'm working with at the moment have 10 subcategories below each of them. Sheet1 is the full product database listing. I place new subcategories in blocks of 10 that I plan to add to the database on Sheet2. Sheet2 also holds the default partial category names in cells A2-A11.

Part 1:

I am currently using the following formula on Sheet2, in column C to combine the category name value on Sheet1, with the default partial category name values on Sheet2 (A2-A11). I'll paste two blocks so you have a clear picture of what I mean by blocks of ten.

=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$2)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$3)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$4)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$5)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$6)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$7)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$8)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$9)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$10)..................

View 6 Replies View Related

Count The Number Of Entries In A Data Validation Dropdown List And Display A Result.

Nov 7, 2007

I am trying to do 2 things involving data validation. 1) Count the number of entries in a data validation dropdown list and display a result. 2) Use an If statement to pull the formatting from a cell into another cell.

An example would be if Cell A1="A", then show the drop down list associated with cell or sheet "!ryanB2". Alternatively, I would like to also display the number of entries in the drop down list.

View 9 Replies View Related

Data Validation Format Letter Number Letter Number Etc.

Jul 11, 2009

I want to apply Data Validation to a cell, so that only the following combination of letters and numbers can be entered.

Letter Letter Number Number Number Number Number Number Letter.
e.g AB123456C.

View 14 Replies View Related

Dynamic Names Pointing To Blank-Delimited Blocks Of Data

Nov 10, 2012

I have a column of data that is blank-delimited into five blocks. The size of each block will vary, since the data comes from a web query. A blank (empty) cell tells me where a block ends and the next one begins.

I would like to set up five dynamic names (e.g. Block_1, Block_2 and so on), each of which will reference the corresponding segment of data.

What would be an elegant way of defining the dynamic names?

View 6 Replies View Related

Nested Data Validation: Figure A To Enforce Dual Data Validation On A Single Cell?

Aug 19, 2009

I'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.

View 2 Replies View Related

Data Validation Used To Create Separate Data Validation List

Feb 15, 2014

I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.

i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list

First Name
Surname

Paul
Smith

Paul
Jones

Tony
Phillips

View 1 Replies View Related

Excel 2013 :: Averaging Rows Of Data Within Larger Blocks Of Datasets - Skipping Rows

Jul 16, 2014

I am trying to average different rows and columns within a larger block data set in a series. This data is from a 96-well absorbance microplate reader experiment. I only mention this to describe the raw data output I am dealing with.

Each set of data is in a 12 x 8 block with the next block below it with one blank row between. So I have a block of data contained between A1->L1->L8. The next block is contained between A10->L10->L17. This continues for a total of 28 blocks.

I want to take averages from rows or columns from each block and autofill them into a single column. So for example I'll need =Average(A1-C1) with =Average(A10-C10) below it and so on and so forth. My problem is that if I try to autofill from this already started column the third row will take the average of A2-C2 instead of A19-C19.

Is there a formula/script for me to skip the correct number of rows to the next data block?

I have attached my spreadsheet to this thread. I am using Excel 2013

FeS_Kinetics.xlsx

View 1 Replies View Related

Data Validation: Can I Use Data Validation In A Cell That Has Formulas In It?

Apr 3, 2009

I have attached a sheet that I am working on. I want cell G1 to be less than or equal to 165. That cell contains a formula. If the formula takes the number to over 165 the validation is allowing it.

View 2 Replies View Related

Data Validation :: Selected From 4 Validation Lists

Sep 26, 2007

I would like to know if it's possible to populate a data validation list based on what is selected from 4 validation lists?

for example:
On sheet1:
If 'Group1' is selected from data validation list1 then data validation list5 will show a list of all items from Group1. If 'Group2' is selected from data validation list2, then data validation list5 will display all the items in 'Group2'...

(I do not want to use a combo box for this)

View 9 Replies View Related

Text To Number Conversion In Validation List!

Dec 3, 2007

I have 2 sheets;

Sheet1 (Also named "TicketNames") and Sheet 2 ("Day1").
On TicketNames I have 4 Columns the first 3 columns with about 5 names per columns.
Each list of five are given a specific Name ("One","Two","Three"). The last column is just
a list for Day1 dropdown menu. (3 names, "One", "Two", "Three").

On Day1, I have a validation list on A1 which will allow the user to select either ("One, Two or Three").

On B1, another dropdown menu, but it will only show the items related to the selection they made on A1.

My problem is that on A1, instead of having "One" show up, I want it to say "$1" for One dollar. But because it is a number not a text it won't allow me to use a validation list using this.

I'm using Excel 2007

View 14 Replies View Related

Vehicle Number Plate Validation Check

Jun 11, 2014

I'm looking for a function which will check if the cell value is a valid UK registration number plate format.

True if it is, False if it isn't.

I've tried myself and had a look around but am unable to find a solution to my problem.

If also possible, if false, to make to necessary amendments to make it a valid format...ie If some lower case values, make them upper case, if there is a space entered, remove it, if a O is entered instead of a 0, correct it and show the corrected value when the function is run. For all that it can't do that with, then leave as False.

I understand the second part may not be possible, just identifying whether or not the value is a valid format. I have something similar which does this for UK postcodes, but am hitting a brick wall trying to do the same for UK registration number plates.

View 9 Replies View Related

Add Names To Blocks

Oct 9, 2008

In a worksheet I have (not equal) blocks of data. In column A there is the projectnumber, in columns B-K there are data. Projects are devided by an empty row. All rows in some block have in column A the same value (projectnumber).

What I need is the following: I would like to add names to that blocks. The name must be equal to the projectnumber.

View 7 Replies View Related

Transposing In Blocks Of 10?

May 19, 2014

I have a list of numbers in Col.A which can be variable in length.The objective is to copy these numbers into Columns with 3 col gaps in between.So the objective is that these numbers are listed horizontally (with 3 col.gaps separating each nr).To achieve this I have written the script below. However, as the orig.list of p/ns in Col.A can be variable, I would like to perform the transposing in blocks of 10 numbers.The transposed end product should be listed 10 numbers in each row (with 3 col gap between)rather than in one row. how to modify my vba script to do the above?

Code:
Sub TransposeSkippingColumns()
Dim c As Range
Dim i As Long

[Code]....

View 8 Replies View Related