I want to create a nested IF formula that checks for blanks in three cells.
If A1=Not blank, then enter in "Live"
else
If B1=Not blank, then enter "Signed"
else
If C1=Not blank, then enter "Interested"
else
enter blank into cell
I have the following macro:-
ActiveSheet.Select
ActiveSheet.Copy
Columns("A:D").EntireColumn.AutoFit
Range("A2:B500").Select
Selection.Sort Key1:=Range("B2:B500"), order1:=xlAscending, Key2:=Range("A6:A250"), order2:=xlAscending
Within this I would like to add a couple of features which check:-
1) If there is a number in column A - there should be one in column B
2) The numbers in column B are sequential i.e. 1, 2, 3 etc without any gaps in the sequence
I created a macro to save my spreadsheet into another book, but I first want to check if cells Z2 & Z3 are blank, and if Z4 = "$--k". If any of those conditions are true, I want a messagebox sent to the user to please fill in data in those cells, and exiting the sub( ) preventing the save from happening. The messagebox would say "Blank Info", vbOKonly button, Title would be "Fill in data".
View 2 Replies View RelatedTrying to create a formula, assume it will need to be a nested formula since I need to validate that cells are not blank and if so use a different cell .....
View 9 Replies View RelatedTrying to write function statement that does the following:
IF cells C9:E14 contain any of the following: "Termination" or "Forms" or "PWE" or "TSA" or "3rd Party", then cell would show "Provided Date (If Applicable):",""
This is my best shot at trying to get it to work, but it wont, no matter what iteration I try.
=COUNT(IF(C9:E14="TERMINATION",IF(C9:E14="FORMS",IF(C9:E14="PWE",IF(C9:E14="TSA",IF(C9:E14="3RD PARTY")))))>0,"PROVIDE DATE (IF APPLICABLE):","")
I want to reformat some data, arranged as follows, and ignore blank cells
Date1 Time1 blank Time2
Date2 blank Time3
to
Date1 Time2
Date1 Time2
Date2 Time3
Code being used, currently writes out lines where a Date exists, but Time cell is blank, what do I need to modify in the code below, to ensure blank times are not written out
Sub test()
counter = 2
For i = 1 To Range("A65536").End(xlUp).Row
For j = 2 To Cells(i, 256).End(xlToLeft).Column
Sheets("Sheet2").Cells(counter, 1).Value = Cells(i, 1).Value
Sheets("Sheet2").Cells(counter, 2).Value = Cells(i, j).Value
counter = counter + 1
Next j
Next i
End Sub
if Cell A1 is NOT blank then
If cell b1 is blank then show I in cell c1
If cell b1 has a date (any date) then show C in cell c1
If cell b1 says "ongoing" then show O in cell c1
If cell A1 IS blank then c1 should show nothing.
My formula is returning a 0 when true instead of being blank as specified. If I designate a value other than "blank" (i.e. "A Word") it still returns a 0. What am I doing wrong?
=IF(AND(CBAuditType="PHYSICAL",TxtInsuredName=""),"",TxtInsuredName)
I have three named ranges that I need to do lookups for First I need the formula to do a look up at the HUMANALOOKUP range and then if a value is not found go to LABLOOKUP and then if not found go to CHCSLOOKUP and if not found return a blank. the column layout of each worksheet is the same so the column index number same throughout the formula.
View 2 Replies View RelatedI have a nested if statement that doesn't give a blank cell when it is evaluated. The cell is general formatted but results in a '0' in the cell instead of a completely blank cell.
If statement is:
=IF('Sales info'!B16="",'Sales info'!B6,IF('Sales info'!B6="","",'Sales info'!B16))
Why is this giving me a 0?
how to check that the formula in the cell1,cell2,cell3 in first row is same in next rows.For example how to check that formula's in c2,d2,e2 is same as c1,d1,e1 and c3,d3,e3 is also same as c1,d1,e1.
View 9 Replies View RelatedI have an Excel sheet set up with 6 columns: Col A contains a user-entered date.
Cols B-E each contain a drop-down that the user can set to 1 of 4 options.
Col F (I want) to show a date based on Col A & the results of the drop-downs.
The drop-downs contain (in order of importance): "Immediate","Urgent","Routine" and "None". If any of them are set to "Immediate", the date in Col F should be Col A date+2 days, if any set to "Urgent" it should be Col A+14 days, any set to "Routine" it should be Col A+28 days and for None the field can remain empty. I can enter a formula in F2 that checks for B2's drop-down as follows:
I am having trouble with several IF..THEN..ELSE loops in my code, all of which are pritty much the same. I need to find rows that are formatted in a certain way, in the example below this is a clear background and Black text. I know the loop works because i have tested it without colours on a test workbook, and i know the colours are correct, but it keeps skipping over the condition, regardless of the outcome. All the variables shown are declared correctly before the loop is entered.
View 2 Replies View RelatedI have a list of dates in a column, and am wanting to compare them against today() in cell A1. If any of the dates are in the past, it returns a FALSE, if all of the dates are in the future, it returns a TRUE.
View 7 Replies View RelatedI would like to check if selected cells is a union of several ranges or one solid range. I am sure there is a way, but did not manage to find it. How to do it?
View 2 Replies View RelatedI'm trying to make a game where from a choice of 16 words the contestant has to choose four of those words that, when another word is placed before or after each word it makes a phrase.
e.g From this list of 16 words
albert
bell
[Code]....
choosing bell, bottle, print, stocking can all have BLUE placed before them to make bluebottle, blueprint etc. That would be the correct answer. Choosing their four words would be from a drop down list of all 16 words, separate cell for each list options/chosen answer. bell bottle printstockingCORRECT
There would be 4 rows in total for 4 different answers to be made from the 16 words on offer. I have tried everything to get it to work in the 5th cell but it's difficult.
I am checking whether or not two different cells contain a number or the error #NA.
If one of the cells contains a number then the result will be that number.
If both cells contain #NA then the result should be “99”
Example:
Formula in Column C
The values are in columns A and B.
If the value in cell A is a number the result is A.
If the value in cell B is a number the result is B.
If the value in cell A and B equal #NA the result is 99
Basically I'm doing a excel spreadsheet where i have a range of cells where we can input some figures or amount. If the cells they indicated exceed a certain amt example: 800, i would want it to show an error msg. I know it maybe sound simple, but have been using the if and countif formula which keep on showing error to me.
View 3 Replies View RelatedI am creating an excel application and have come a bit stuck. I would like to able create a macro button for printing a blank version of the workbook...when I say blank I mean the cells that the end user is able to type into.
I think I am able to do this providing all the cells are on the same sheet as the button using this ...
I am trying to create conditional formatting to ascertain whether values in one table (Table 1) are different from another identically formatted table above it (Table 2) (so each cell in Table 1 has a corresponding cell in Table 2).
If the value in a cell in Table 1 is different from its corresponding cell in Table 2, the cell should highlight in red.
Every cell's corresponding cell is the same distance away.
I tried to put in a conditional formatting for C5 (C5 being the first cell in Table 2), which works, but this breaks and turns to #REF every time i save and re-open the document.
Is there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.
View 5 Replies View RelatedI have a report that includes data broken up by several headings. Instead of showing the heading and the data below it, I would prefer that the heading was included in every subsequent row that it related to (and the heading be removed).
All the headings are in italic non bold format.
All the data is in standard format (no bold / italics / underline).
The only data in the sheet is as above, and there are no gaps in the data. A heading will relate to all the data directly below it until there is a new heading.
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
Is there a way on excel to produce a nested IF that says when 3 cells out of a row of 26 cell exceeds 100, then 'issue' is shown? So far I have the worksheet set up using:
'=IF(OR(C5=$C$2,D5=$D$2,E5=$E$2,F5=$F$2,G5=$G$2, H5=$H$2,I5=$I$2,J5=$J$2,K5=$K$2,L5=$L$2,M5=$M$2,N5=$N$2, O5=$O$2,P5=$P$2,Q5=$Q$2,R5=$R$2,S5=$S$2,T5=$T$2,U5=$U$2, V5=$V$2,W5=$W$2,X5=$X$2,Y5=$Y$2,Z5=$Z$2 ),"Nusiance","No Issue")'
Which is each single cell in the row, but I'd like to go a step further for it to be if any 3 of these calls exceeds 100, then nuisance or no issue is shown and not just if one single cell exceeds it.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.