New Worksheets Based On Values
Apr 16, 2009
A. Is it possble to add and name new worksheets to a workbook based on the unique entries in a particular column.
B. Is it possible to also filter based on this same unique list, and add the filtered data to the newly added spreadsheet of the same name.
Here's what I'm trying to do. The attached example workbook shows a list of vendor numbers in column C. I need to create one worksheet for each of the vendor numbers in that column, named as the vendor number, and add the data (along with headings) for that supplier to their worksheet.
View 4 Replies
ADVERTISEMENT
Feb 17, 2010
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
View 7 Replies
View Related
Feb 11, 2010
I'm trying to sum across multiple worksheets based on a simple condition. I have a time sheet with a worksheet for each week (52 worksheets). I've gone back and added a column to code the type of work done, types 1 - 17. I want to sum the hours of each type across all worksheets. This is what I have that doesn't work:
View 10 Replies
View Related
Jan 22, 2010
Worksheet 1
I am calculating group averages for the following performers - very good, good, average, low, very low - for a series of factors.
Worksheet 2
Contains the same factors with the values for which Im trying to work out the average. Each factor has a performance rating above it, either very good, good, average, low, very low.
I need a formula which will match the performance rating from worksheet 1 (I3, J3, K3, L3, M3) to worksheet 2 and then calculate the averages of each factors based on those matches.
View 10 Replies
View Related
May 9, 2008
I have Master sheet where I collect info from sub sheets. All sheets are similarly formatted, ie. product numbers on column A and headers on row 2. I need to sum values from all sheets based product number and header. Master sheet includes all product numbers and some extra headers, sub sheets include only needed numbers. Headers on sub sheets are identical.
Currently I have this thing solved with following formula:
N48=sumproduct(sumif(indirect("'"&$B$378:$B$385&"'!A:A");A48;indirect("'"&$B$378:$B$385&"'!L:L")))
Where B378:B385 includes sheet names.
But problem with this is that column is hard coded, so I have to know that that value I am looking for is in column L. That wouldn't be show stopping problem on its own, but I have columns all the way to DR and copying formulas for each column takes a lot of time when I have to manually update each column. Just copying cell holds that L:L and doesn't change it.
So, in addition of getting values for specific product number I need to get values from specific column based on column header.
View 9 Replies
View Related
Nov 15, 2009
I have multiple worksheets of data that I need to be displayed in a new worksheet. I have been doing it by hand, but am wondering if there might be a quicker way. For example, I might want the sum of 2 cells from one worksheet to be displayed in a single cell on another worksheet.
View 2 Replies
View Related
Jan 21, 2010
I need to place a value in cell B on sheet 2 of a workbook. The value I need is stored in C10 on all other worksheets in the same workbook. The name of each worksheet is stored in Column A of sheet 2 (Rows 3 through 404). How do I get the value from C10 on each worksheet into the corresponding row on Sheet 2?
I have Excel for Auditors and there is code on page 201 but it is the reverse of what I need. I need to get the value from the worksheets as opposed to moving a value to the corresponding worksheet.
Example:
Sheet 2
Column A Row 1 = Worksheet name
Column B Row 1 = Need Cell C10 value from worksheet name referenced in A
View 9 Replies
View Related
Mar 2, 2010
I have several worksheets across the bottom of the workbook, lables September, October, November, December, January, Febuary... Each of these worksheets contains a table of identical formatting. (See below)....
View 9 Replies
View Related
Jul 31, 2007
I have a workbook with about 20 different worksheets in it. Each one has a header with three text boxes in it. I would like to fill these text boxes for all of the sheets, but I would like them not to be linked together or to any one cell, so that the individual fields can be modified after they have been set.
My code is below. When I run it, I get an error - "Compile Error: Method or data member not found."
hwrev = InputBox("What revision is your hardware?", "HW Revision")
eswrev = InputBox("What revision is your embedded software?", "ESW Revision")
sheetcount = 0
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
View 3 Replies
View Related
Dec 9, 2007
Assistance w/ this line of
If Not isempty sheets("PCCombined_FF"). cells("I4:I"&lrow) Then sheets("Discounts").cells("I4:I"&Lrow).value_
=sheets("PCCombined_FF").cells("I4:I"&lrow).value
Function for code is to look at cells in col. I on the sheet "PCCombined_FF", If the value is not blank then that value will populate the next open cell on sheet "Discounts" in col. B beginning in row 2.
View 4 Replies
View Related
Jan 29, 2014
Let's say I have 3 worksheets, the first of which being the total of the 2 other one, let's say total Apples, Red Apples, Green Apples.
The first column has the name of the customer, and the other columns afterwards have several other values such as sales in 2012, sales in 2013, year-to-date sales, growth etc...
I want people to be able to type in the name of the customer, then the sales for Red Apples, and the same in the worksheet for Green Apples, and then their total is shown in the Total Apples worksheet. The problem is that not all customers will buy both, and so overtime the cells will no longer be aligned to have one formula dragged across both worksheets.
Is there a way to get Excel to search the entries in both worksheets and compile them in the Total worksheet, summing entries that are under the same supplier name?
View 5 Replies
View Related
Apr 2, 2014
Have the below code that combines some worksheets. I need it to paste values instead of just paste. How would I do this?
[Code] .....
View 1 Replies
View Related
Apr 19, 2014
Basically, I have six worksheets where I have, on two different columns each,
the code, the quantity, the shelf
Where it is stored.
What I have been asked for is: given the shelf, to have got back all the codes and quantity that there are in this shelf.
My Idea is: in a sheet called <<initial>>, create a cell where I write the value of the shelf (this value in a text).
Then, with a VB procedure, start activating first worksheet, start reading the first column.
if the shelf value corresponds to the required shelf, then activate a sheets called "Results" and write there all the value corresponding to code and quantity.
Then, when ended the column, I would move to the second column. Once ended the second column I would activate the second worksheet.
But I am having some problems since the beginning, since I have problems in reading the value of the shelf column.
I am attaching how I have started to wrote the procedure : [Code] .....
Why I can read the value of the cell ?
View 7 Replies
View Related
Aug 3, 2009
i have about 100 worksheets in my workbook ..i need to combine them into one worksheet ...all my 100 worksheet has many formulas in some of the cells.
i want to combine all the worksheets one below the other with a gap of 5 blank rows after each worksheet contents....i just want the values in each worksheet to be pasted and no formulas...
View 9 Replies
View Related
Dec 30, 2006
how to use SUMPRODUCT to sum values between 2 dates in a table in one worksheet containing 2 coulmns (dates and values) .
but .......
If I need to do that to a whole workbook of 100 worksheets
i.e ( in on step I enter 2 dates , and the result should be the sum of all the values in all the worksheets that are between those 2 dates
View 9 Replies
View Related
Feb 7, 2007
I have a pretty slick macro that once ran will save the spreadsheet and copy the input to a master sheet, so far it is very functional. I borrowed most of the code from within this forum, as VBA is not my strong point. My problem being that when the script runs and posts the output to the master sheet, it is pasting formulas. I need it to strictly paste the values in, otherwise my master sheet is referencing hundreds of other worksheets.
Sub Finished()
Dim iReply As Integer
Dim countColumn As Integer
Dim MyFullName As String
MyFullName = ThisWorkbook. Name
iReply = MsgBox(Prompt:="This will upload your tracker and exit, Are you sure?", _
Buttons:=vbYesNo, Title:="")
If iReply = vbYes Then
'If Yes Do This
Application.DisplayAlerts = False...................
View 2 Replies
View Related
May 11, 2007
I am aware this question must have been asked to death on this forum and I already searched and found some answers but for some reason I can´t get it to work. I have two worksheets (sheet1 and sheet2). In Column E of Sheet1 I have product descriptions that I want to compare cell by cell to the product descriptions in Column F of Sheet 2. If they are not the same, color in the cell in Sheet 2. There are 1810 rows in both columns. I tried this method but it gives me an error (in spanish) that says that I cannot compare ranges of data.
I have also seen some code to do something similar (http://www.ozgrid.com/forum/showpost...85&postcount=3 ):
Sub find_cell()
Range("A:E"). Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate
ar = ActiveCell.Row
ac = ActiveCell.Column
' the two lines above store the row and column values of the cell found
' in your example ar is going to be equal to 229 and ac is 3
' now this following lines are to change the colors to red
With Cells(ar, ac).Interior
.ColorIndex = 3
.Pattern = xlSolid
End With
End Sub
I don´t quite get the "Range("A:E").Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate" part though.
View 7 Replies
View Related
Aug 30, 2007
I have a workbook with a sheet for every month. I have a searchbox searching for a client and jumping to that location. The problem I am having is that it takes me to the last occurence in the workbook if there is more that one client with the search criteria. Do you have any suggestions for a searchbox that whould take me to the first occurence and give me an option to go to the next occurence in the workbook. Please see the code below that I am using currently using.
Private Sub CommandButton1_Click()
Dim ws As Worksheet
Dim cl As Range, rng As Range
For Each ws In ActiveWorkbook.Worksheets
Set rng = ws.UsedRange
With rng
Set cl = .Find(Me.TextBox1.Value, LookIn:=xlValues)
If Not cl Is Nothing Then
Application.Goto cl
Else
View 7 Replies
View Related
Sep 13, 2007
I have two worksheets containing four columns of data, example below. I need to match data found in any one of the four columns in worksheet B, against the data in the corresponding column of worksheet A, and if matched, return the result from the “Asset No” column of worksheet A (and return N/A or similar if none of the four columns could be matched)
Worksheet A
Asset Serial Server IP No.
1234511111ABCABCBlank.
45678Blank.DEFDEF12345
7891033333Blank...45678
Worksheet B
Asset Serial Server IP No.
Blank.22222XYZXYZBlank.
45678Blank.Blank...12345
Blank.Blank.Blank...45678
In this example, I would expect to return the result 45678 against row 2, & 78910 against row 3, and receive a “not found” in row 1
I tried using IF & OR in an array formula, but could only get to a TRUE or FALSE result (was not able to reference the Asset Number).
View 8 Replies
View Related
Sep 21, 2007
I have 2 sheets in a workbook. Column A on sheet 1 has numbers such as 123456, 123457, 123458 ect ect. Column A on sheet 2 has same amount of numbers but mostly different. However there are a few duplicates. QUESTION: How can i write a code that will fit in a new sheet lets say sheet 3 that will pull out only the list of numbers from sheet 1 and sheet 2 that are NOT duplicates?
View 5 Replies
View Related
Jul 26, 2013
I have "Worksheet1" with Columns A and B for IP Addresses, then Column C is for a device name.
I have "Worksheet2" with a range of IP Address from F5:I260
When I enter a new device and assign it the IP addresses on "Worksheet1", I would like the IP Address to highlight in "Worksheet2"
This way I can keep track of which IP address I have used. Excel 2010
View 7 Replies
View Related
May 13, 2014
I often have a table (sometimes formatted as a table, sometimes just data arranged like a table but not formatted as a table in Excel) where I'd like to create individual worksheets (eventually workbooks) based on the information in one of the columns. Take for instance the attached file. I'd like to create a macro to create worksheets (or preferably workbooks) based on data in the Region column. So workbook 1 would be something like North Region Sales 2014, and contain only the data for the North region. Workbook 2 would be something like South Region Sales 2014, and contain only the data for the South region, and so on. Sometimes I might need to create these based off the Region field, another time I might need to do it based off of the Salesperson.
Region Sales 2014.xlsx
To do this currently, I'd use the filter and unselect whichever data I want to keep and then delete all the remaining (visible) rows. When I unfilter, I'm only left with the data I want. This works, but it takes a long time when working with 50 or more "Regions" and large amounts of data.
View 14 Replies
View Related
Mar 6, 2014
I have an excel file that is used to record information about particular projects. We need to record dates related to these events and these are stored on separate worksheets. These use a key of sorts, where the unique references are replicated on all worksheets.
I have set up the data sheet to generate the unique identifier and the hyperlinks to the Received! and Sent! worksheets automatically as new unique references are added to the Data! worksheet.
What I would like is a VBA code to populate hyperlinks in the Received! and Sent! worksheets in column B, to link back to the Data! worksheet unique reference.
I had used formulas in the past, but the Data! worksheet is massive. I've needed to write hundreds of hyperlink formulas referencing blank spaces in the Data! sheet in anticipation of new projects. It would be better if they were populated as the sheet expanded.
View 5 Replies
View Related
May 22, 2009
I want to find sum of all 4 returned values (Sales!BL5, Sales!BM5, Grants!X5, Deferred Pymts!X5
Column References:
Cell AD2 (AMOUNT TOTAL PYMTS)
Cell AC2 (TOTAL NO. OF ORDERS)
Cell Range B5:B4833 on multiple pages (CUSTOMER NAME)
Cell Range AJ5:AJ4833 on multiple pages (CUSTOMER NAME)
Formula:
In Cell AD2 of CustomerData! Sheet:
If AC2 is not blank, then
look for match between A2 and Sales!B5:B4833, return the value in Sales!BL5, and
look for match between A2 and Sales!AJ5:AJ4833, return the value in Sales!BM5, and
look for match between A2 and Grants!B5:B4833, return the value Grants!X5, and
look for match between A2 and Deferred Pymts!B5:B4833, return the value Deferred Pymts!X5
Hope this does not confuse, but if John Doe is listed in AC2 I want to find the sum of his total payments if his name is listed as a customer in Sheets Sales, Grants, and Deferred Pymts. The Sales! sheet is divided into AM and PM pricing which explains why Sales! has Column B and Column AJ for Customer Names.
View 13 Replies
View Related
Dec 14, 2012
I am trying to optimize my code below. It works but it is soo slow, it seems to slow down on the array copy and paste special areas. I believe this is because its doing a cell to cell paste method. These sheets have data as well as graphs that i want to retain on the new sheet, but i could select ranges for each each if that would speed up this procedure.
Code:
Sub CreateDataSheet()
Dim ws As Worksheet
Dim sDataOutputName As String
With Application
.Cursor = xlWait
.StatusBar = "Saving DataSheet..."
.ScreenUpdating = False
[Code]....
View 9 Replies
View Related
Nov 23, 2013
I know how to use data validation to prevent repeat values entered into a column on one worksheet using data validation. I don't understand how to do this across 12 worksheets (months of the year) in a file.
To be more clear: When I enter an ID in a column cell, I want that to be compared to all the other ID's in all the past worksheets and rejected if it has already been entered
All are column D The values entered are identification numbers and have both letters and numbers.
View 5 Replies
View Related
May 14, 2014
I need to look at the values in Column B Sheet1 and compare to Values in Column K in Sheet2. If there is a match, I want to put "Cashed" in the cell adjacent to the cell in Sheet1.
View 4 Replies
View Related
Mar 19, 2007
I'm looking for a way that I could place a button on my workbook that would create a new document from the specified worksheets and convert the formulas to the values.
View 9 Replies
View Related
Jan 27, 2010
How would I write a formula that takes cell values from six worksheets and adds them up as a percentage (quarterly updates)? I realize this is wrong, but here's what I'd tried (for three sheets).
=+SUM(IF(EVH!F7="Y",25,0)+IF(FUN!F7="Y",25,0)+IF(HES!F7="Y",25,0))/3
View 9 Replies
View Related
Aug 9, 2007
I have a macro that changes user selection from formulas to values:
Dim vCol As Variant
vCol = Application.InputBox("Select Column", Type:=2)
If vCol = False Or vCol = "" Then Exit Sub
Set UserRange = Range(vCol & "9:" & vCol & "35")
UserRange.Value = UserRange.Value
End Sub
I have several workbooks that use this macro, and the workbooks can include several sheets.
Is there's an easy way to change the macro so the user selection is changed in all sheets in the workbook. E.g. if the user selection is column H, the formula is changed to values in all sheets in the workbook.
View 4 Replies
View Related
