I have "Worksheet1" with Columns A and B for IP Addresses, then Column C is for a device name.
I have "Worksheet2" with a range of IP Address from F5:I260
When I enter a new device and assign it the IP addresses on "Worksheet1", I would like the IP Address to highlight in "Worksheet2"
This way I can keep track of which IP address I have used. Excel 2010
I'm having issues with Excel's 2010 conditional formatting. Seems easy to use, but I'm trying to highlight values based on 2 columns of numerical data. Example:
Column F:
6
6
14
Column L:
3
NA
17
I would like Column L to highlight values that are greater than Column F in green. If they are less than Column L then highlight them in red.
Seems I was able to do this with Excel 2003, but I don't understand the 2010 version.
I have read that there is a VBA macro in F11, but I also read that it would only sort the workshhet names, but not the data. I have Excel 2010.
View 2 Replies View RelatedI have a workbook that has five worksheets listing warehouse inventory items. One worksheet for 2013, 2012, 2011, 2010 and 2009. In column b of each worksheet is a column B with a heading of "Item Number". There are hundreds of item numbers on each worksheet.
I would like to be able to find and highlight item numbers that appear in multiple years. Preferably color coded showing appears in five, four and three years. If that's too difficult than just items that appear in all five years. I tried conditional formatting, but have been unsuccessful.
Lastly, is there a way to list any duplicate item numbers on a new worksheet.
I've been looking for a solution to highlight all duplicates within a certain column across all worksheets in the workbook as the entry is made, no button to search for them. I have found bits and pieces, but can't seem to stitch them together to create what I am looking for, still very green with vba.
My workbook is a loading schedule at a warehouse, so there is a tab for each day (the date being the tab name, ex. '12.04.13'.) Tabs are continually added and removed to progress the calendar, and minimize file size. The column I am searching for duplicates in, is column L (or 12, however you wish to identify it.) If a duplicate value is entered, I want at the very least to highlight the value just entered, and the value elsewhere on the workbook, and if possible, have a msg box pop up stating the location of the other duplicate (or at least the tab (date) the duplicate is on.) The message box is more so for an in your face error check, with a built in GPS. Would it also be possible to only search from row 2 to 100, and ignore any further rows on each sheet?
The point of this, is to locate duplicates to make sure an appt has not been double booked, and both entries can be located to verify which entry has the correct information (carrier, delivery appt, etc.)
I have a Excel 2010 spreadsheet that contains 3 columns of (£) values. I am wanting to highlight a cell if one of these values do not match the other 2 columns. e.g below I would need the middle column to be highlighted as it does not match the other 2 cells.
25,449.47
25,451.65
25449.47
The thing to point out is that it can be any of the cells that do not match, not necessarily the middle column and occasionally all cells will not match and all need to be highlighted.
I am sure I need to use the Conditional Formatting, but cannot figure the formula.
I'm looking for a formula in column F that will return True if there are any negatives or blanks in E for any of that item A?
False if variance is blank or all off that item has no variance?
Excel 2010
A
B
C
D
E
F
1
item
size
ordered
shipped
variance
formula?
[Code] .....
In an Excel 2010 worksheet I use three columns. I need a user to be able to input a word or phrase into a cell or input box, and have Excel highlight that word or phrase every place it occurs only in column C.
Can I do that with conditional formatting? Or do I need to use a function? Or do I need a macro?
As per my attached file : duplicate value.xlsx
How to highlight duplicate value by using Conditional Formatting in office 2010.
Actually i Know how to use this feature in sheet "example" of my attachment.
But i want to highlight inv# 457878268 in cell E9 of sheet "My requirement" if it is exist above in cell E2 to E6.
Highlighed the Column and Row of the selected Cell. I have seen someone using it. Whenever he click on any cell the related column and Rows clour change. For Example if I select Cell B5. The Column B and Row 5 change its colur from B1 to B5 and Row from Column A to Column B. If this option is already available in office 2010
Column B
Row 5
As seen below, I'm looking for a vba code to highlight color on every Friday and through columns 1, 4, 6,9,11,14,16,19,21 upto columns 28 i.e. AH
Excel 2010ABCDEFGHIJKLMN1DateQty1Qty2TotalDateQty1Qty2TotalDateQty1Qty2Total
21-Aug-124559289374521-Aug-122721298357041-Aug-1222792338461732-Aug-121161244636072-Aug-12347918036592-
Aug-1225723358593043-Aug-12128088221623-Aug-124369158259513-Aug-1227723299607154-Aug-124096192960254-
Aug-124679386585444-Aug-122081870295165-Aug-12333751838555-Aug-124270357278425-Aug-1231793455663476-
Aug-122061336654276-Aug-1241466142076-Aug-123761939231587-Aug-123757375975167-Aug-12212203622487-
[Code] .........
I am trying to use condtional formatting to highlight a row in a table if the order number is NOT on another table, on a different sheet. Example: Order Number 1001 is in my table on Sheet4, Once the order has been filled is comes off my "Pending Orders" table on Sheet1, which is based on a data connection, so it updates once the connection is refreshed. I would like the row with order number 1001 in my table on Sheet4 to be highlighted letting me know it can now be removed, since I have to manually manage this table. I am using Excel 2010.
View 3 Replies View RelatedIn column A, I need to highlight the cells green if the value is less than < the values in columns B and C, yellow if A = either B and C, and red if A is greater than B and C. But I only want the formatting to stay in column A. I'm using Excel 2010 and Windows 7.
A
B
C
Green->
444
512
482
Yellow->
364
571
364
Red->
101
99
87
I'm using Excel 2010 and when I highlight a range and right click 'name a range' is greyed out. I can bypass this by going to the formulas tab and defining a name from there.
Anything I can check to see why this is not an option for me?
I need conditional format in column Q which highlight in red, any date over 14 days old.
This column also contains texts (non-dates) and these need to be left alone.
I've experimented with a few bits of formula I've found online, but nothing has worked . .
I'm on Excel 2010.
I would like (in excel 10) to highlight cells where there is NO DUPLICATE found In Columns "E" on Worksheets 1 & 2. Is that possible ?
View 7 Replies View RelatedUsing Excel 2010. Is it possible to change the default line thickness and fill color when selecting the ActiveSheet Target Row below?
I would like a thin border and a light grey fill - without interfering with any fomatting or conditional formatting that has been applied to the worksheet.
Excel 2010 Higher than past average formula?
Im using Excel 2010 and want to make a formula that will High light the number when it exceeds the past 30 days average. My information is listed vertically in row F..
MS Excel 2010, WinsXP
how to highlight an entire record based on the value of a single cell?
I would like to highlight all records grey where cells in a column = "closed".
I am using Excel 2010. I have a pivot table where I want to highlight the ENTIRE row where a certain cell value equals something.
In essence I want all the Material Subtotal Rows highlighted "Orange" But as you can tell from the picture below I am having issues with the Body of the Pivot table. I have the formula checking to find whenever it finds the word total to highlight it.
The example below is showing how I need the row to be formatted. I can get the Data (Units) section formatted no problem. It is just the other part of the pivot table that I cannot format.
For the columns from Material to SAP # I have been trying to use Dynamic Name ranges using the Offset function. However, excel turns that Name range to a range and if I filter the pivot table, it adds extra ranges to the Applies to box and starts to really mess it up.
I am looking for a way to highlight groups of identical number cells in alternating grey and white. My goal is to make it clear when there is a repeating set of numbers. Below is an example of what a completed state of this would look like that I created manually. The real form I will be using this code on will have long number which is why I am looking for this added clarification. I am using excel 2010.
1
1
2
3
4
[code].....
I have an Excel 2010 file with 10 worksheets. I would like to set up two VBA codes to attached to a two button; one to hide specific worksheets, the other to unhide. The specific worksheets are:
Calculation Sheet
GL Receipt
Sheet2
I have a simple problem. I have many worksheets which all contain data in the first four columns. I want to be able to create a chart (a scatter chart) in the first worksheet which plots the data on that worksheet and then format it how I want it to look. This I can do.
Next, I want to copy and paste that graph into all the other worksheets, but have the pasted graphs display the data in that worksheet.
As it stands, in Excel 2010, all the pasted graphs keep showing the data in the original worksheet irrespective of which worksheet I now have them in. This seems to be different to older versions of Excel and is very annoying and has to be changed by hand which is very time consuming.
How can I make charts that don't have the worksheet name in the cell reference, or how can I paste a chart so that is updates the references to the same row and column but in the new worksheet?
I know I could copy and paste the entire worksheet and then manually copy the new data into that copy of the worksheet - but that is not a real solution to this problem.
I am using MS Excel 2010.
What I want to Hide two worksheets and leave one worksheet open when I close out the file.
ws TOC will remain open when closing out the file
ws Rqmts will hide when closing out the file
ws Planning will hide when closing out the file
Why my code is not working. I am working with Excel 2010. It will only delete the column on the active spreadsheet and not go to next worksheet. Not all worksheets contain the word "Broker".
[Code] ......
Not sure if its something to do with Activecell, try After:=ws.cells(1,1) or passing it in as the active cell stays the same i think.
I know there are many ways to create an "All Data" worksheet. Copy & Paste is the most obvious or pasting named ranges into the new worksheet. I have a workbook with 48 tabs with up to 1000 rows of data per sheet. I need to merge each tab into one main "All Data" worksheet.
How to combine these 48 sheets in an easier way than the two options I already know (Copy/Past or Paste Named Range). Any Add-In's to Excel that can possibly do this? I am using Excel 2010.
How to make this "All Data" worksheet combining data from each sheet of the 48 tabs would be most useful.
I need to copy all sheets from a workbook to a another workbook (create a copy of the one I am using) and this is the cod I have:
Sub NewReport()
Dim Workbook1 As Workbook
Dim Workbook2 As Workbook
With Application
.ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
[code].....
The problem I have is that the output only have the sheet1!
I am using Excel 2010
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
Im trying to copy multiple workbooks and just save it into only one worksheet. I have 2000 diffrent workbooks with the diffrent amount of rows, The ammount of cells is the same and it dosent change.
im working on a excel 2010
This is what i got for the moment..
Sub LoopThroughDirectory()
Dim MyFile As String[code].....
I upgraded to Excel 2010 from Excel 2000 a couple months ago. In Excel 2010, after double-clicking on values in a pivot table to create a new worksheets, I'm unable to highlight those worksheets and add a column to all of them. I was able to do this in Excel 2000... I can't figure out what's stopping it from happening for the life of me. Am I missing something obvious here?
View 3 Replies View Related