Next & Back Buttons To Move Through MultiPage
Sep 30, 2009
I am trying to do is move between the MultiPage using Next and Back Buttons. I have attached what I have acheived already which is the majority of the work. There's just one minor issue I'm trying to get around.
The back button is disabled when on page 1 and the next button disabled when on the last page, but when the 'Seal Viewer' is opened from the spreadsheet, it starts off on the first Page with the option available to go back which we obviously do not want Yet when we press next and then back the function works correctly.
View 3 Replies
ADVERTISEMENT
Nov 7, 2011
I have placed next and back buttons in the userform. I have a total of 8 pages.
The problem is that page 2 and 4 is not active. And I cannot see why. In the properties of the pages the data is exactly the same at all pages.
Are there errors in my code?
Code:
Private Sub cmdNext_Click()
MultiPage1.Value = MultiPage1.Value + 1
End Sub
Private Sub cmdBack_Click()
Dim intPage As Integer
intPage = MultiPage1.Value
Do
[Code] ..........
View 2 Replies
View Related
Nov 17, 2011
I have two pages in the userform. What I was trying to do is that certain textbox (txtDate) needs to be entered on the page1 before going to page2. The user can still select page2 however I want the vba to bring the page back to page1 if the data is missing.
Here is the code:
Private Sub MultiPage1_Change()
If MultiPage1.Value = 1 And txtDate = "" Then
MultiPage1.Value = 0
txtDate .BackColor = &H40C0
End If
It didn't work completely - the tab selection on top was on page1 however all the controls shown are still the controls under page2. I have to manulally click page1.
I also tried MultiPage1.Page(0).Enabled=True but it didn't work either.
View 3 Replies
View Related
Sep 6, 2002
I'd like to insert some radio buttons in a worksheet that activate a hyperlink to a web page and then be able to go back to where I started (ie the radio button)
I can link the button to a macro which was a recording of clicking on a hyperlink. The trouble is when I hit the return arrow to return to the sheet from the web page I go back to the location of the hyperlink not where I started from.
Is there a way to do this with the buttons.
If I can rearrange the sheet to allow for more narrow columns I may be able to just use the hyperlink friendly name argument and do it that way but I'm not so sure I can insert more narrow columns without messing up the layout of the whole sheet. With a button I can float several of them over an area regardless of the width of the columns.
View 1 Replies
View Related
Nov 11, 2008
Somehow I dragged a minimized window in Excel so that the top bar (where you click to drag) is hidden off the screen and now I can't drag it back down.
I can maximize the window through a right mouse click on the task bar.
Alt Space does not enable the "move" function.
I have restarted excel, closed it through the "X" and through the task bar. I have rebooted. I have renamed my file.
View 11 Replies
View Related
Mar 20, 2014
How to move the data from the back column to the front as below
A
B
C
2
3
1
3
1
2
to
A
B
C
2
3
1
3
1
2
View 4 Replies
View Related
Nov 3, 2008
I know this is a sooo basic question but I can not for the life of me remember how.....
when I am on a excel sheet I can not seem to move from quare to square qiththe arrow keys.
It just now takes me all the way to the left or all the way to the right and not from cell to cell from left to right.
I know its something rather simple yet I can not seem to figure this out.
I have no problem with this on 2003pro.
View 6 Replies
View Related
Aug 11, 2012
I have a layout something like the following:
A1
A2
A3
[Code]....
Where each (i.e., A1) represents a location. I have tried to use a coordinate system but this will not work for the back-to-back locations. (Assuming each location is 2 feet wide, For example A1 to C1 is 4 feet apart, not 2 feet (as Euclidean or rectilinear would calculate it as).
Would there be a way to incorporate an if statement for those locations that are back-to-back? As a rectilinear distance calculation would work as long as the locations are not part of the same "block".
Ultimately I am looking to have a matrix which contains all the distances between each location:
A1
A2
A3
B1
[Code].....
View 4 Replies
View Related
Feb 10, 2012
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
Is there a quicker way?
View 6 Replies
View Related
Mar 14, 2007
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
View 9 Replies
View Related
Aug 23, 2007
I am creating a bar inventory/"numbers" sheet for a corporation. I have been searching on and off for a week or so to find an answer or a tutorial on what I am looking to implement into this worksheet. I want to take a userform, with a multipage control, and have the control for each tab, show me a different part of the worksheets. For instance, the first tab would be inventory, the second tab would be ordering, the third tab would be weekly numbers, etc ... I am wondering how to "add ranges to the multipage control in order to make it a "viewer". I have found tutorials on how to print, enter info into the form and save it to the sheets using a button, but I can't find a tutorial on how to implement the control on how to make tabs show the ranges. Can someone point me in the right direction on a tutorial, or maybe if willing a small spreadsheet with a mulitpage control on it, showing how to add the ranges from different worksheets?
View 14 Replies
View Related
Apr 24, 2007
I'm having a problem setting the multipage tab on a userform in VB. It's kinda weird because the code was working fine until recently, where it's suddenly stopped working properly! The only thing I can think of is that I changed versions of Excel to v2003 recently.
I want to not let the user change tabs unless the inputs entered have been error checked. My code is:
Private Sub MultiPage1_Change()
If Me.MultiPage1.Value > 1 Then
If Range("inputs!dob") = "" Then
Me.MultiPage1.Value = 1
MsgBox ("Please enter your date of birth before continuing.")
End If
End If
End Sub
The tab itself changes fine (ie. shows the tab 1 header), but the contents of the tab are actually the contents of tab 2!
View 9 Replies
View Related
Jun 24, 2008
I have had some succcess with Userforms, but I have now tried creating multipage ones.
I assumed that when I clicked on page 2 or page 3 of the multipage control, it would take me to a blank canvas, but instead it just replicates what is on Page 1. If I put textboxes and labels on page one, it repeats them on pages 2 and 3. If I delete boxes fropm page 3, they also disapear from 1 and 2!
So im unsure how to put different labels etc onto different pages.
View 9 Replies
View Related
May 22, 2009
I have a multipage (say "Multipage1") in a userform. It has five different pages in it starting from page1 to page5.
When the userform is opened, I want to have a control as to which page is being displayed first.
eg: I want the page2 to be displayed when the userform is being opened.
View 25 Replies
View Related
May 9, 2006
I am looking for a way to make a UserForm MultiPage control show no tabs.
Is this even possible?
Or is there another way to get this same result?
View 9 Replies
View Related
May 13, 2006
When I drop a multipage control onto a worksheet, the control defaults to showing/having 2 pages. I looked at the various properties and there doesn't seem to be a way to change/add to that number of pages. I know I can add pages to the control programmatically. But what if I don't want to do it that way? What if I want to set the control to show 3 pages instead of 2 at design time? Is there a way to do that?
View 3 Replies
View Related
May 15, 2006
Can you run a procedure when a particular page in a multipgae control is clicked rather than use the Multipage change control.
View 5 Replies
View Related
Feb 1, 2007
I'm trying to create a next button from one user form to another. But I can't reach there. I know that I have to use, multi page, but I don't know how!
View 4 Replies
View Related
Mar 7, 2007
In a Multipage form, the first page contains 2 DTPickers. These show the date value from the specified excel worksheet cells and update the cells accordingly if the user changes the dates with the TDPicker. These work perfectly.
If I place another DTPicker control on another page of the Multipage though, it leads to a run-time error.
As an example, the code for 1 of the successful DTPickers on the first page:
Private Sub DTPickerAccountsStartDate_CallbackKeyDown(ByVal KeyCode As Integer, ByVal Shift As Integer, ByVal CallbackField As String, CallbackDate As Date)
End Sub
Private Sub UserForm_Initialize()
Application. ScreenUpdating = False
ActiveWorkbook.Sheets("Cover").Activate
DTPickerAccountsStartDate.Value = Format(Range("B6").Value, "dd/MM/yyyy")
End Sub
There are no errors in any of the cell references etc and the formatting of the DTPicker controls is exactly the same in all cases.
View 6 Replies
View Related
May 24, 2007
The tabstrip and multipage object curiously resemble one another, in that they both have tabs, and hence naturally arouses one's curiosity and raises this question.
I searched this forum, and found one thread, from several years ago, where some senior members shrugged and said they had never used it. I found little in google, after an hour of searching, except for a Microsoft example which I completed and attached here.
I still have questions in my mind about exactly when and how one might use a multistrip, but this example helps me a lot, so I felt it might help others as well.
I am anxious to hear your tips and caveats about multistrips.
A multistrip appears to be a handy way document related options for the programmatic alteration of the functionality of some aspect of an application, such as color, or font, or perhaps output device.
View 3 Replies
View Related
Jul 2, 2014
Is there anyway to make the number of multipages you have respond to a previous fill in the Userform? Let's say you have a textbox asking for number of requests, if you type 4, there will be 4 multipages with the same fills.
View 4 Replies
View Related
Feb 15, 2014
UserForm1, page5. From Combobox1 I choose a city and the textboxes give me the values from Sheet3. I'd like to color in green the smallest value. for example, if for LHR I find for A-4214, B-4420, C-3127 => value 3127 to be green. The problem is I have more textboxes in other pages and some of them are colored in green also. Is possible to reffer to these textboxes from page5 only?
View 8 Replies
View Related
May 9, 2009
If i have a form with a multipage of 2 pages on it and on each of the pages i have a button and a text box, is it possible to have each of the arrangement linked to the enter key.
eg button 1 to textbox 1 when i hit enter on page 1
button 2 to textbox 2 when i hit enter on page 2
View 3 Replies
View Related
Feb 23, 2010
I am trying to get a scrollbar on a MultiPage UserForm to provide instant results on the active spreadsheet. The spreadsheet is full of charts, and as you move the scrollbar, the charts change. Trouble is, the code I have is VERY slow. Moving the scollbar turns the cursor into an hourglass and that little scrollbar graphic lags about a centimeter behind. Is there faster code out there?
Here is what I have:
NOTE I use both the change event and the Scroll event because using only one gives me only half the functionality of the scrollbar...that is, without both, either the arrows on the scrollbar work or only the slider works.
View 5 Replies
View Related
May 28, 2012
I'm using a multipage control on a form that has the style set to fmTabStyleButtons. So it uses buttons instead of tabs. I named one of my buttons (tabs) to Close. Can I set this up to where just pressing the Close button will cause it to exit the app not just go to that page?
View 9 Replies
View Related
Apr 4, 2007
I cannot make a correct variables syntax for MyMulti and sRngC.
How to make a correct syntax for this
Dim pa As Integer
Dim MyMulti As String
Sub MyMulti(iRow1 As Long, iCol1 As Long, iRow2 As Long, iCol2 As Long, _
iRow3 As Long, iCol3 As Long)
For pa = 1 To 7
Next pa
MyMulti = multi & pa
Dim sRngA As String
Dim sRngB As String
Dim sRngC As String
sRngA = Cells(iRow1, iCol1).Address & ":" & Cells(iRow2, iCol2).Address
sRngB = Cells(iRow3, iCol3).Address
sRngC = Page & pa
If Not ActiveCell.Formula = "=OR(All!" & sRngA & "=TRUE)" Then
Me.MultiPage1.sRngC.Visible = Range(sRngB).Value
Else
Me.MultiPage1.sRngC.Visible = ActiveCell.Formula = "=OR(All!" & sRngA & "=TRUE)"
End If
End Sub
sRngC should be Page1, Page2, etc.
View 9 Replies
View Related
Jun 9, 2007
I need to create a multipage with tabs running down the left hand side. I cannot use the normal horizontal multipage control because this would result in an impossibly wide page. Is there a vertical multipage control? I could not find one? Or a way to convert the multipage control to show vertical tabs?
Please bare in mind that this vertical multipage will be shown in a form that already includes a normal horizontal multipage (I am using multipages within multipages too!).
View 9 Replies
View Related
May 1, 2008
I'm trying to find out how to hide just the tab headers on a multipage object. I see alot of posts on the forum that say how to hide the entire page, but I just want the tabs (headers) invisible.
View 9 Replies
View Related
Jun 16, 2008
open a Usefrom that has a MultiPage and go to a specified tab using a Macro/Code?
View 9 Replies
View Related
Apr 17, 2006
I have a userform with a multipage consisting of 4 tabs.
Each one has several combobox's and 1 commandbutton.
As you move through the form the commandbutton moves the data to my worksheet then moves you to the next page. When it reaches the last page it will return you to the first page then unload the form which is great.
The problem I am having is the cursor is not in any of the boxes on the first page. If I click on one of the other tabs then return to first page the first combobox has the focus. All the tab orders are correct. Can anyone point me in the right direction.
Private Sub cmdNext3_Click()
ActiveWorkbook.Sheets("CarDetails").Activate
Range("A1").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select
End If
View 9 Replies
View Related
