How can I make this statement take the value from the Offset cell to populate the text box and not take the value from the text box to popluate the Offset Cell?
With txtBoarded
ActiveCell.Offset(0, 1) = .Value
End With
This code is in the user form initialize code.
I am trying to auto-populate text in cells in area A, based on data I enter into other cells in area B. I want the area A cells to be for display only, as all editing will be done in area B. The problem is: how do I do this such that the text I write does not get cut off if is longer than the column width? See the attached document for a clear example and description of what I am trying to do...
Excel Q.xlsx‎
What I am trying to achieve is to get the UserForm to populate from information in the Database. In column AD I have a formula which produces a number when an item becomes due. I would then like label1 (lblReg1) to populate data from the same row in column A and label2 (lblDate1) from column S.
I then have a CheckBox (chk1) next to each pair of labels for the user to confirm the task has been actioned and when the CommandButton is clicked I would like the result placed in column AE in the corresponding row.
I have tried utilising code from another userform I have but I cant get it to work and I believe this is to do with the 'ActiveCell' reference as there is no Activecell (you can probably guess I am new to this). Example:
Sub UserForm_Initialize()
If Sheets("Database").Range("AD3:AD5000").Text = 1 Then
lblReg1.Caption = ActiveCell.Offset(0, -29).Text
lblDate1.Caption = ActiveCell.Offset(0, -11).Text
Me.chk1.Visible = True
End If
End Sub
(All the Labels are blank and will be filled hopefully by code, all the CheckBoxes are set to Visable = False at Initialize stage, I will be using Me.Height = ?? to expand the form to visible check boxes)
I have attached a small selection of my workbook where I have set up the userform and named the labels.
Can anyone amend the code to achieve the desired result or alternatively put me straight on the correct way to do this.
If i have a range say E12:O12 and want to find the last cell before blank, lets say it finds m12 as the cell with the value before blank. then with m12 it needs to determine weather row 11 in the same column has Text either "S" or "F" if "S" then m12 = t if "F" then m12 offset(1,-1) = t. And just to make things more difficult i need the range E12:O12 to step 2 as well until it gets to E208:O208 .Noting that row 11 never changes and will always have either an "S" Or an "F"
and also t = time()
I have this offset function working:
=OFFSET(calculos.xlsx!_5260;10;5)
The cell name "5260", is also entered as text in cell A1, in the current workbook (not calculos.xlsx). How do I refer excel to get the text from cell A1, instead of having to enter it manually.
I'm trying to do a column of individual discount calculations using a discount percentage found in a cell two to the right of a cell containing the text "Total SP:" that is always upwards and to the left of the cell where the formula goes (but could be two rows or could be 20). There are multiple "Total SP:" cells in the sheet - I always want the first one upwards. I have created the following but I get #NAME? where I hope to see the discounted value.
VB:
Dim Discount1 As Double
Discount = Cells.Find(What:="Total SP:", After:=ActiveCell, LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlPrevious, MatchCase:=True).Offset(0, 2)
Range("R9:R" & LastRow).Formula = "=IF(J9>0,$E9*(1-Discount1),0)"
I've just thought, the Cells.Find needs to be redone for each cell where the formula is inserted to ensure it always catches the correct discount and this isn't going to do that - it's going to find it once and always use that single value.
I think this needs a Loop or something and to move the ActiveCell down one after the formula to get it to redo the Cells.Find.
I'm trying to look at a value in one column (Column A) and if it matches a set of criteria, I'm trying to change the value of another cell 6 columns to the right.(Column G) I've been trying for a couple of days now to get this working, but to no avail. I've tried to modify the code below that I've found on this site but can't quite figure out what I'm doing wrong.
Sub RatingsFix1SP()
Dim FindWhat, rngCell As Range, i As Integer
FindWhat = Array("BB", "B", "CCC", "CC", "C", "CCC+")
For i = 0 To 3
For Each rngCell In Range("A2", Range("A" & Rows.Count).End(xlUp))
If InStr(rngCell, FindWhat(i)) <> 0 Then
rngCell.Offset(0, 6) = 0.15
End If
Next rngCell
Next i
End Sub
To try to clarify a bit: If column A in the attached spreadsheet has a rating code of BB, B, CCC, CC, C, or CCC+, I want the Haircut % rate in column G to be 15%. It seems the code that I'm using changes the % rate to 15% if any "B" or "C" shows up in any part of the string in column A.
I want to do the following:
If cells in column B from Sheet 1 contains ''text'',
Copy Cells from column D and F from Sheet 1 - TO - Sheet 2 in columns C and E -
I am attempting to copy Text from one cell and populate to another, e.g.
A1 = Excellent
A2 =
A3 = Good
A4 = Bad
If i type ='Sheet 1'!A1 in the cell on my second sheet it populates fine, however i need to be able to ignore blank cells as well
I need to be able to populate a cell with text from 3 possible cells, two will have the text "none" in them, the other text cell is the one i need to populate in another cell.
View 3 Replies View Relatedhere is a formula i would like in cell D20 (might not be a formula out there,maybe more code)
if cell C20= "S" then text in Cell D20= "SHOP" (then will be able to type after "SHOP")
if cell C20="F" then text in Cell D20="Field" (then will be able to type after "Field")
I have many facters (15 to be exact) that I would like to do this in the range of D20:D38
I am trying to use VBA to populate the first blank cell in row 6 with the word "Short"
I keep getting sub or function not defined and I am sure its because I am trying to Frankenstein some code together to get it to work. So far everything works as I need but this last step.
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
I have a table with huge amount of data. I use a UserForm with textboxes to populate the information of the required row.
There's a Comment Box text on a specific cell that I need to populate on one of the textboxes but I am unable to do it.
The code I have that works well, populates the cell content:
[Code].....
Now, on that cell, there's a comment text that I need it populated as well on another textbox but it doesn't work. I tried:
[Code] .....
But this doesn't work.
I have a excel workbook. which have a master data sheet or table as drawn.
[Code] ........
The above sheet is master sheet. I have also worksheets which named are matching with column head from "DARCL", "MMT", SSL"......till "GRT" (No "order" named worksheet is there). So I want to feed data or value as total order in "ORDER" column, (it is not necessary to put the value in each row) and the total value or number is distributed by me in particular column or colums. After data feeding I have required a command button or any button that can copy or show the reference row (customer name) with its cell value in the matched column head worksheet. As example: total order is 200 put in "ORDER" column in row 3, and 200 is distributed as by myself 100 in column "E" (MMT) and 100 in column "H" (RITC) and so on...after this feeding, I click the button and the data will show or copy as table M/S UIW : 100 in "MMT" worksheet and M/S UIW: 100 in "RITC" worksheet.
As example layout of others worksheets.(attach pic)
After click command button on the master sheet the related customer name and the value will be populated in respective matched column head with worksheet. If there is no cell value in master sheet the below mentioned cell are hides.
master sheet.jpg
others worksheets.jpg
I am having a trouble in Excel sheet.My column A has a drop down list with text- possible, not possible, not required.Based on the text, i need to populate texts in columns B, C and D.
For example
Column A drop down selected is "possible"
then B coulmn should automatically populate "1-3"
C should populate with "3-5"
D should be "5-7"
I am using MS excel 2007.
I have attached the .xls file.
The basic setup is as follows:
(1) the user inputs a number into cells B2:B6 (arbitrarily shown as 3,4,3 and 2)
(2) the user then inputs a series of values into the respective columns E, G, I or K (corresponding to examples A-D, respectively) with SPACING between each value corresponding to the value entered in B2:B6.
For example, the value "4" is chosen in B3, so values are entered in column G at time = 0,4,8,12,16,20....etc
As another example, the value "3" is chosen in B4, so values are entered into column I at time = 8,11,14,17,20,23...etc, ie. the starting point is not necessarily t = 0.
(3) once the values have been entered as described in point (2) above, a series of results are automatically calculated in columns F,H,J and L.
NOTE: I have omitted the formulae for the calculation and have just entered arbitrary (color coded for clarity only-i don't need color coding!) numbers alongside each inputted value for the 4 examples A-D.
OK, so what I want to extract from the table for each example is the paired time AND result values, and then show them in a new table.
I have used an OFFSET formula (originally suggested by "daddylonglegs") to do this, and the results i GET are shown in columns O-V.
HOWEVER, what i WANT is the output as shown in columns Y-AF.
So as you will notice, there are 2 problems:
(1) Example C in columns S/T: value in cell B4 = 3, but the first value entered in column I does not start at a multiple of 3, so no values are returned in columns S/T because the offset function only uses row 6 as a reference point. What i want is the result shown in columns AC/AD.
How do i write a formula which says, "look down a column, find the first cell that has a value in it, and then offset from that cell/row" ?
(2) Example D in columns U/V: since the first input in column K starts a t = 12 (ie, cell K18), then i have 5 rows of empty space in columns U/V. What i want is the result shown in columns AE/AF.
Lastly, i should add that i am not necessarily stuck on using OFFSET function, since i keep reading that it is quite volatile.
I have a formula that basically work, except is really complicated and slows the whole sheet down and then, for some reason, returns a circular referencing error or something. There must be a better way!
So the back story is that I have a spreadsheet that I'm using to track ~1200 employees, including salary, job title and, where I'm having trouble, reporting line.
Column [R] is the Line Manager (direct manager) and Column [S] is Department Head. Columns [T] - [Y] is "Manager", "Manager +1" (manager's manager), "Manager +2" (manager's manager's Manager), etc up to Manager +5.
'Line Manager' is input manually. 'Manager' = 'Line Manager'. Manager+1 to +5 just vlooks up off the same sheet. This part works fine and will update the whole reporting line if you change the manager.
Department head is where I'm having a problem! Essentially what I'm looking for is for the formula to look at the 5 cells to the right (the manager +# columns) and look for 'Mr Boss' and return one cell to the left since department heads report the the boss. There is one exception, its that some immediate reports of Lucy Lawful also are counted as Department Heads. For this purpose I vlooked up this list of exceptions on another sheet. My formula is this (entered as an array):
=IF(ISTEXT(T5),IF(OR(OFFSET(INDIRECT(ADDRESS(MAX((T5:Y5="Mr Boss")*ROW(T5:Y5)),MAX((T5:Y5="Mr Boss")*COLUMN(T5:Y5)),4)),0,-2,1)=Vlookups!H:H),OFFSET(INDIRECT(ADDRESS(MAX((T5:Y5="Mr Boss")*ROW(T5:Y5)),MAX((T5:Y5="Mr Boss")*COLUMN(T5:Y5)),4)),0,-2,1),OFFSET(INDIRECT(ADDRESS(MAX((T5:Y5="Mr Boss")*ROW(T5:Y5)),MAX((T5:Y5="Mr Boss")*COLUMN(T5:Y5)),4)),0,-1,1)),"")
Below is an example file. In my real file the formula works for everyone, not sure why its not working for half the employee now, but probably cos it's a useless formula.
Line Mgr Example help.xlsx
The following formula works very well for me but it will only return a number and not text.
=SUMIF(B4,K4,OFFSET(B4,0,Q4,))
Is it possible to change the offset(?) of the items/text in a combobox? I mean like, all items are placed at a certain distance of the comboboxframe(work) on the left/right (or centered) I hope I explained it clearly enough? I'd like the items/text to be really close to the left (frame side) of a combobox
View 2 Replies View RelatedI have a large file where I want to name about 30 ranges. Initially I had done this using the range addresses and it worked well, but I continue to modify the spreadsheet and add and delete rows, so I need to go back into the code and change the ranges manually. I know there has to be a better way.
What I wanted to try doing was finding some specific text. That text (in all the ranges) is actually one column to the left and 33 rows below where I want to start the named range. Additionally the named range will be a 10 x 33 range. For example, if the data starts in B1, the data to be named will be in B1:K33 and the search title will actually be in A34. Hopefully that's clear...
My original code looked like this:
Code:
ActiveWorkbook.Names.Add Name:="[MyRangeName]", RefersTo:=ActiveSheet.Range("B2:K33")
I was attempting to us the Find function with this code, but I can't seem to figure out how to tell it to look for the text (that would be in A34) and then name the range that would be offset by (-33,1) and then name the entire range.
I'm writing some code where I need to know the column in which a specifc text string occurs. Because of the nature of the sheet, the string will only appear in one column, but that could be in almost any column on the worksheet.
For example say the text string is "Year 1", I need to find the column with this string, and then offset down to a predetermined row, or offset over to the appropriate column (something like below).
With Selection
.Offset(0, x).Select
If List.Selected(0) = True Then
y = i - 1
With Selection
.Value = Salary * Inflation1 ^ y
End With
Else
I am in the process of writing a VBA code(I should I am fairly new to this code writing!!!).What I need to be able to do is below.(enclosed please find a output in an xls file) What I should be able to do is below:
1.Find the text "Cash(No Listing)(Monthly)"
2. Offset to the 13th Column after that
3.Select the value in this column ,copy the value
4.Go to a row above and move one column to the left i.e.offset (-1,-1) and move 12 column backwards i.e.offset(0,-12)
5.Copy the value in 3 above to this entire range
6.Repeat this process for the entire file
My code is as below.Let me know where am I making a mistake. Just to let you know that this code performs the job well for the first entry i.e in the yellow makde area and doesn't do the job for any further entries .Llooks like I have some problem with the loop but not sure as to whats happening!
I have been unable to get this code quite right.
I want to be able to search all of column A for the string "UNAUTH O/D FEE £20.00" and when it is found, add £20 to column B, and 01/01/00 into column D of the same row.
Sub feedate()
Set rd = Sheets("fees")
z = 20
x = 1 / 1 / 6
For i = 1 To rd. Range("A65536").End(xlUp).Row
If UCase(Cells(i, 1)) = "UNAUTH O/D FEE £20.00" Then
Cells(i, 2).Value = z
Cells(i, 3).Value = x
End If
Next i
End Sub
How can I add a date stamp that will populate a field when text is entered into another cell but will not change every time I re-open the sheet. I have been using =if(B4="",NOW()) which changes each time though and as soon as text is entered it disappears. I want to capture the actual date that someone enters text into a cell and save that date in another cell???
View 5 Replies View RelatedI have created a form (example attached)
In this form when Lot ID is typed in and hit enter to go to next box, I like to search that lot ID in 'Processing" sheet and populate with corresponding date in the next text box. I hope someone can help me on this.
In real time the "processing" data is in a different workbook and sometimes is not available to the operators.
I have form with a list box lstEmpName which is populated from a sheet "Records" range a1:a35. This is in the UserForm initilize sub.
When a name is selcted I want the corresponding payroll number (found in Records range B1:b35) to auto popuate the txtPayroll box. I've had a go at some code but it's not working in the Userform Initialise sub and I don't even know if this code would work.
txtPayroll = Sheets("Records_LookUpList").Range("B" & lstEmpName.ListIndex + 1)
just want to input a simple series.. in a column and populate all rows..
A1
ROW 1 DATE: 15/05/2014
ROW 2 DATE: 16/05/2014
ROW 3 DATE: 17/05/2014
ETC. i can make the date go in series all the way down.. soon as i add date: in front of the date in same cell it messes up the series. need the "DATE:" in back and "15/05/2014" in color not black
whenever i attempt any formula i found on web it is all black.. and just the 2014 value changes..
- Find a value on a sheet “ORM” in Column G5:G33
-Get the corresponding value of B5:B33 of that cell
-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.
-Place this canned remark in TextBox31