Offset Repeat Loop Until Empty Cell
Aug 14, 2008
I would like click in cell a6 and then click a button loaded with VBA code that would:
1. Offset over 2 and down 1 to c7 so that is the current cell
2. Repeat down until an empty cell is reached (our example will be c10)
3. Put the items found in c7, c8, c9 into a variable (is that right?)
Variable would then be used in a vba generated email that I have all ready to go. I would want each item placed in the email one after the other like:
Name
Date
Phone
View 9 Replies
ADVERTISEMENT
Nov 13, 2013
how do I write a Do Loop so it will repeat the below until row A is empty? I want the sheets to be added and named based on what someone enters on a data input sheet. i.e. if there are 5 rows with data, then it will create 5 sheets named accordinlgy.
Sheets.Add After:=Sheets(Sheets.Count)
Sheets("Tab Organization").Select
Range("A2").Select
ActiveCell.FormulaR1C1 = "ABC DEF"
Sheets("Sheet3").Select
Sheets("Sheet3").Name = "ABC DEF"
View 9 Replies
View Related
May 6, 2014
I have the following Macro to transpose data from a column into succesive rows. I need it to repeat, until it has processed all data in column A / until it reaches an empty cell in A.
Sub Macro1()
'
' Macro1 Macro
'
[Code]....
View 3 Replies
View Related
Mar 31, 2008
With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
View 9 Replies
View Related
Feb 1, 2009
I have a data sheet with employee information. Only one column. It prefixes information with codes, but keeps it in the same cell. I want to move data of certain types into their own columns, but the amount of data is variable, so I cannot simply move every Nth cell, etc.
i.e.
Employee#1
200 Firstname Lastname
204 99999999 (Employee ID)
G38 00005000 (i.e. Pension Deduction)
H38 00007580 (i.e. Benefits Deduction)
X96 00012099 (i.e. Staff Club Deduction)
Employee#2
200 Firstname Lastname
204 99999998
G38 00000775
X96 00001000
So you see some employees may have different codes altogether. But I know that I want all the cells that start with 200 to be offset (-1,1), and all the cells that start with 204 to be offset (-1,2), and so on so that basically I end up with columns of info instead of a one column list.
I have been reading and studying other peoples' macros, and am just starting to grasp the basic. When I wrote my own to accomplish this, I put this together, which doesn't work. But I don't know enough to know what I don't know.
View 7 Replies
View Related
Oct 27, 2008
I want to keep going down a column until I get to an empty cell and then paste some text. I want to write code in vba but I am really struggling with this.
A1 = Hello
A2 = Hello
A3 = Hello
A4 = *Nothing* so I want to paste some text here?
View 3 Replies
View Related
Feb 8, 2009
I have some values in column A; i want the code to go thru all these values and do the followings:
1) i want the code to check if there is a valua in the first cell in clomn A; if there is valua - i would like to copy that value and paste it on H1
2) then i wan to copy everything on Column H and paste special in column L2
3) then i want the code to go back on column A and get the second value and paste again in column H1 and then copy everything on column H and paste again the first empty cell in column L and so on..
I want to loop this process until the first empty cell in column A. I have attached spreadsheet for just to clarify what i am trying to do. There are 2 tabs in the spreadsheet, one tab explains the current issue and the other tabs shows how the final result look like.
View 5 Replies
View Related
Apr 22, 2014
My code is working with respect to finding the right data, but it keeps overwriting itself on each loop through...I need it to copy/paste and then on the next loop, move down one cell...
[Code] .......
View 1 Replies
View Related
Oct 7, 2008
I have a do while loop that runs until the reference cell is empty. This has been working but now I have changed the reference cells somewhat so that the cells contain a formula that returns nothing if a function returns 0 or an error. So the cell has no value but it does have a formula in it. The do while loop keeps running because it thinks that the cell has something it it.
Do While Cells(i, 2) ""
Is there something else that i can put for "" to get the loop to stop when cell contains no value but a formula.
View 9 Replies
View Related
Mar 11, 2009
I am trying to create a loop which stops once a cell is empty.
Assuming I have declared proper DIM, my code is
Row=1
Do
Row = Row + 1
SheetName = Cells(Row, "A")
Sheets.Add.Name = SheetName
Loop Until IsEmpty(SheetName.Offset(1, 0))
View 9 Replies
View Related
Aug 2, 2014
I am having trouble with trying to repeat or loop the below statements. I am trying to start with applying text in cell "B2" which will hide column "A" on a separate sheet. I want to know if it is possible to repeat the same statement but loop the statement until cell "SL2" and column "SK"?
[If Range("B2").Text = "" Then
Sheets("43mm").Columns("A").EntireColumn.Hidden = True
Else
Sheets("43mm").Columns("A").EntireColumn.Hidden = False
End If
View 3 Replies
View Related
Mar 12, 2007
in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.
here is the macro that moves the data.
Sub movedata()
Range("A1:H1").Select
Selection.Copy
Sheets("Sheet2").Select
ActiveSheet.Paste
Sheets("Sheet1").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Range("A1").Select
Sheets("Sheet2").Select
Rows("1:1").Select
Selection.Insert Shift:=xlDown
Range("A1").Select
Sheets("Sheet1").Select
End Sub
View 9 Replies
View Related
Aug 10, 2011
I have a workbook where I need to sort data with range (K2:L24), then move down 208 rows and sort range (K210:L232) and repeat this upto 1000 times. I have shortened a recorded macro as an example and would like to know how to loop or repeat.
Sub Macro2()
'
' Macro2 Macro
' Macro recorded 6/04/2011 by Greg
[Code].....
View 4 Replies
View Related
Jun 15, 2007
I have a number (>100) of excel workbooks (consistent format) on a server and I am trying to create a master spreadsheet with links to specific cells. I started using formulae based on Concatenate and Indirect functions but always had to use F2 & F9 to get a result. I am now working on a macro to build semi dynamic links, I am some way there but need some expert help please.
In Col A I have the path and file name for all my source files - I have used the Filename *.xls & FoundFiles for this.
In Col B is my specific file name(s) extracted from Col A using an If , Len and Text function.
My macro declares variables; File = Range (“B#”) and Data(21) - an array of 21 specific worksheet cell references
I then select C1 and with active.formula insert the consistent path, File and Data(1).
Then C2 with path name, File and Data(2). Then C3 path name, File and Data(3). & So on for the 21 variables in the array - not elegant but it works okay
I am now at the point where I need to move down the rows and repeat this for each source.
I am wondering (hoping ) there is a simple way of offsetting this for the 100 rows / source files. I would also like to be able to set the offset repeat by counting the number of populated rows in Col A.
The code (from memory so syntax may be a bit wonkey):
View 14 Replies
View Related
Dec 23, 2009
How would I loop this macro to drop down one row to B4, run through the procedure (there are always the same number of rows to move), and continue to offset one row until reaching the end of the data?
The problem is that when I pull report data into excel, the data and headings end up in the first three columns. This is a simple cut, paste and delete macro that I recorded. I need it to offset to b4 after moving the data under b2, run, then b5, run, ect. so at the end I will have a list of numbers in column B and the coresponding data on the same row.
Range("B3:D3").Select
Selection.Cut Destination:=Range("F2:H2")
Rows("3:4").Select
Selection.Delete Shift:=xlUp
Range("B3:D3").Select
Selection.Cut Destination:=Range("I2:K2")
Rows("3:4").Select
Selection.Delete Shift:=xlUp
Range("B3:D3").Select
Selection.Cut Destination:=Range("L2:N2")
View 12 Replies
View Related
Feb 23, 2013
I only need this as a workaround to the 8192 hidden row limit when copy and pasting.
View 4 Replies
View Related
Jun 20, 2009
I need to copy the value from cell Z18 and then use the function 'paste values' to input the data in cell B24.
Having done this I need the sheet to recalculate and generate a new set of random numbers. I then require the new value in cell Z18 to be copied and pasted in the next row of column B, cell B25.
I need this process repeating for 10,000 iterations so that the range B24:B1023 is filled.
Here is my code, it will recalculate cell Z18 and return the value in cell B24, but will not offset down one row and loop.
View 12 Replies
View Related
Aug 10, 2012
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
View 1 Replies
View Related
Dec 1, 2006
My code (with help from this forum) loops through all workbooks, all sheets and all columns OK as I have tested it with message boxes
I need to take the value of Range("C5") from each column of all sheets of all workbooks
and paste it to Range("A4") downwards in Workbook("Loop Folder.xls") . That is, each new value is inserted in the next row of column A.
Sub test4() ' populate analysis sheet
' copies cell("C5") from each column in each sheet in each workbook in a directory
Dim Mypath As Variant
Dim excelfile As Variant
Mypath = "U:September 2006" ' folder where all excel files reside
excelfile = Dir(Mypath & "*.xls")
Application.DisplayAlerts = False
Do While excelfile <> "" ' loop all files
View 7 Replies
View Related
May 31, 2014
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
View 3 Replies
View Related
Mar 5, 2009
I have this code attached to a button on the first sheet of a workbook with hundreds of sheets.
it is suposed to look for a cell that contains "SAY:" and then move one column to the right and make it a zero. It works on the first sheet but not on any other sheet.
View 7 Replies
View Related
Dec 28, 2011
I'm trying to use an offset loop to write form data onto a closed workbook. It works fine when the sheet is blank but as soon as I fil the first row it sticks when running. I'm not getting any error in the code and am at a bit of a loss.
Here's what I'm using:
Do
If IsEmpty(ActiveCel) = False Then
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
ActiveCell.Value = txtName.Value
[Code] .........
View 2 Replies
View Related
Nov 13, 2008
I have a For loop that depends on the number of cells that have a numerical value. I can step through the code and verify that it's not exiting the For loop when the cell value is "Empty".
View 2 Replies
View Related
May 12, 2006
How do I make a loop to delete a row if the cell A is empty. Example: If cell A3 was empty I want it to delete the row. If cell A4 had data I would like it to skip that row and go on to cell A5.
View 6 Replies
View Related
Feb 26, 2009
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
View 2 Replies
View Related
Apr 15, 2012
I'm using a variable to loop down a column of data. Each time it loops the variable may or may not perform an operation - it will if there is something in the cell but won't if the cell is empty. It writes the answer of the operation to an ajoining cell, before looping again.
The issue is that if the row cell is empty, what's written to the ajoining cell is the pre-existing value of the variable, because its value hasn't changed.
how best to 'empty' the variable each loop to ensure either that the correct value or nothing at all is written to the ajoining cell?
View 5 Replies
View Related
Jun 27, 2014
Column 'N' and 'O' will be used for inputting information and will never be hidden
Column 'E' through 'F' hold information, however the user will have hidden all but one of columns 'E' through 'F' before running macro
Once the user initiates the macro, the program will detect which column in 'E' through 'F' is not hidden
The macro will then start at row one of the unhidden column and loop down looking for the text 'Req' (not including ' )
If the loop finds 'Req' it will search in column 'N' of the same row for any data at all
If it finds data in column 'N' for that particular row, it will check column 'O' of that same row for any data at all
If it finds data in column 'O' also, then all 3 parameters have been met
The loop should continue checking for these 3 items through row 500
If the loop determines that for every 'Req' found in the unhidden row there is data in the corresponding column 'N' and 'O' a message will appear that says 'Checklist Complete"
Upon closing the message box, the file should save and then exit
If the loop determines that for every 'Req' found in the unhidden row, there is not always data present in column 'N' and 'O' the message box should appear and say 'Checklist Incomplete'
In the same message box, it should provide a list under 'Checklist Incomplete' that provides the text found in column 'D' for each row where it failed the test of having 'Req' in the unhidden row and data at all in column 'N' and 'O'
That last part will give the user a tool to see where they might have forgotton to enter data.
View 3 Replies
View Related
Jun 20, 2009
I am using DSUM functions which result in having to have an extra row beneath each of the DSUM formula rows (for the criteria arguments)
The code below checks for color coding and then populates 1 or a 0 in the database for the DSUM formulas
Im trying to optimize the code so that it runs faster. how can i code to skip the rows that do not contain data?
other optimization / best practices that you recommend are appreciated!
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Goto errorout:
If Not Intersect(Target(1, 1), Range("j3")) Is Nothing Then
Application. ScreenUpdating = False
For Each rcell In Range("j11:n731")
If rcell.Value = 1 Then
rcell.Interior.ColorIndex = 37
Else
rcell.Interior.ColorIndex = xlNone
End
View 8 Replies
View Related
Jun 22, 2014
I have a workbook with over 70 tabs whose position shouldn't be changed. Some of these tabs are colored in yellow (sorting by tab color is not allowed). I need to select these yellow tabs first and loop through them (only yellow tabs) and hide empty rows in the range of A1: G 50 on each of them. Grouping sheets wwon't work because each tab has different last row with data within that range.
View 6 Replies
View Related
May 23, 2014
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
View 1 Replies
View Related
