Ending Loop When Cell Is Empty But Has Formula In It
Oct 7, 2008
I have a do while loop that runs until the reference cell is empty. This has been working but now I have changed the reference cells somewhat so that the cells contain a formula that returns nothing if a function returns 0 or an error. So the cell has no value but it does have a formula in it. The do while loop keeps running because it thinks that the cell has something it it.
Do While Cells(i, 2) ""
Is there something else that i can put for "" to get the loop to stop when cell contains no value but a formula.
View 9 Replies
ADVERTISEMENT
Sep 8, 2008
the followng code should execute once but it seems to just keep going round in a loop.
View 12 Replies
View Related
Aug 14, 2009
I am trying to start in cell A1, and loop down. Each time a value is found, I want to insert a blank row, which is working, but I just can't figure out how to end this, it goes to the very last cell in column A and gives a debug error. I would like to to just go back to cell A1 after all rows have been inserted.
Sub Insert()
Range("A1").Select
Do
Selection.End(xlDown).Select
Selection.EntireRow.Insert
ActiveCell.Offset(1, 0).Select
Loop Until ActiveCell.Value = ""
End Sub
View 9 Replies
View Related
Oct 27, 2008
I want to keep going down a column until I get to an empty cell and then paste some text. I want to write code in vba but I am really struggling with this.
A1 = Hello
A2 = Hello
A3 = Hello
A4 = *Nothing* so I want to paste some text here?
View 3 Replies
View Related
Feb 8, 2009
I have some values in column A; i want the code to go thru all these values and do the followings:
1) i want the code to check if there is a valua in the first cell in clomn A; if there is valua - i would like to copy that value and paste it on H1
2) then i wan to copy everything on Column H and paste special in column L2
3) then i want the code to go back on column A and get the second value and paste again in column H1 and then copy everything on column H and paste again the first empty cell in column L and so on..
I want to loop this process until the first empty cell in column A. I have attached spreadsheet for just to clarify what i am trying to do. There are 2 tabs in the spreadsheet, one tab explains the current issue and the other tabs shows how the final result look like.
View 5 Replies
View Related
May 30, 2009
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
View 9 Replies
View Related
Apr 22, 2014
My code is working with respect to finding the right data, but it keeps overwriting itself on each loop through...I need it to copy/paste and then on the next loop, move down one cell...
[Code] .......
View 1 Replies
View Related
Aug 14, 2008
I would like click in cell a6 and then click a button loaded with VBA code that would:
1. Offset over 2 and down 1 to c7 so that is the current cell
2. Repeat down until an empty cell is reached (our example will be c10)
3. Put the items found in c7, c8, c9 into a variable (is that right?)
Variable would then be used in a vba generated email that I have all ready to go. I would want each item placed in the email one after the other like:
Name
Date
Phone
View 9 Replies
View Related
Mar 11, 2009
I am trying to create a loop which stops once a cell is empty.
Assuming I have declared proper DIM, my code is
Row=1
Do
Row = Row + 1
SheetName = Cells(Row, "A")
Sheets.Add.Name = SheetName
Loop Until IsEmpty(SheetName.Offset(1, 0))
View 9 Replies
View Related
Mar 12, 2007
in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.
here is the macro that moves the data.
Sub movedata()
Range("A1:H1").Select
Selection.Copy
Sheets("Sheet2").Select
ActiveSheet.Paste
Sheets("Sheet1").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Range("A1").Select
Sheets("Sheet2").Select
Rows("1:1").Select
Selection.Insert Shift:=xlDown
Range("A1").Select
Sheets("Sheet1").Select
End Sub
View 9 Replies
View Related
Jul 24, 2012
I am trying to create a week ending formula in excel. I have a list of dates and in a new column I would like to display the week ending of these dates. I want the weeks to end on Sunday. For example, if the date column has the date 7/24/12 in it, I would like the week ending formula to spit out 7/29/12. What formula would achieve this?
View 5 Replies
View Related
Mar 20, 2014
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
View 5 Replies
View Related
Aug 10, 2012
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
View 1 Replies
View Related
Nov 13, 2008
I have a For loop that depends on the number of cells that have a numerical value. I can step through the code and verify that it's not exiting the For loop when the cell value is "Empty".
View 2 Replies
View Related
Feb 17, 2007
I am working on code to detect whether a cell contains an even or an odd number in it. I can do this when I know that the numbers I want to evaluate are in cells A1 trough A10 but the next part of the code is for when we do not know how many entries there are and we have to evaluate until we come across an empty cell and then stop.
View 2 Replies
View Related
Oct 7, 2009
I am learning how to create functions. All is going well, except when I auto fill for future input, the cells fill will all kinds of N/A or Null stuff etc.. I was trying to figure out how to do an IF statement like in my example below, that when the cell of reference is empty, keep it empty...but it is not working. take a look at it and tell me what I am doing wrong? I am using a grading system example...when a grade is put in, the corresponding letter grade fills, but when no grade value is entered, I want to keep the cells empty.
"=IF(H5="",""=IF(H5>89,"A",H5,IF(H5>79,"B",IF(H5>69,"C",IF(H5>59,"D","F")))))"
View 4 Replies
View Related
May 12, 2006
How do I make a loop to delete a row if the cell A is empty. Example: If cell A3 was empty I want it to delete the row. If cell A4 had data I would like it to skip that row and go on to cell A5.
View 6 Replies
View Related
Oct 18, 2008
I need a formula to sum all E3 cells starting from sheet "Joe" to the last sheet i have, without being obliged to modify the formula for each new sheet i create and which by default is created in the end. something like:
=sum(Joe:my last sheet created!E3)
Also,do protected cells in some of the sheets affect this formula calculation?
View 9 Replies
View Related
Feb 26, 2009
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
View 2 Replies
View Related
Jul 1, 2014
I want to make the formula: x=SUM(A * e^(-b*d)), wherein A and b are parameters and d the distance.
I've just over 10.000 rows and 15 columns (B4 to P10013) with distances. For each column i give a formula =$S$2*EXP(-$R$2*B4) and extent that for all colums and rows, then I sum all the columns. This works fine, except for the fact that when there is an empty cell the outcome is wrong. Because I set for example A as 10. The answer for that cell is 10, because he sees an empty cell as 0, i guess.
So how do I skip these empty cells?
View 5 Replies
View Related
Mar 16, 2009
I have a chart with blank values in some cases. I have set up the chart to show those values as gaps, which relies on the blank cell being empty. However, my blank cells have a formula along the lines of: if (condition,value,"")
So the chart does not consider them blank, presumably either because the formula is in there, or because "" is not the same as blank. How can I make this cell appear blank for the purposes of the chart?
View 5 Replies
View Related
Jan 16, 2010
Its probably very simple question, but i can not work it out.
I am trying to design a simple worksheet so I can keep track of how much money my room mate has paid me and what she owes. She pays $142 a week rent plus $23 a month for internet.
Please open the attached workbook. You can see in E7 and 8 there is a red negative number. This is because my tenant hasn't paid me yet for those weeks (D7 & 8).
How can i get these cells to read $0 or leave the cell empty?
The reason why I need this to read $0 or nothing is because it is messing up my next calculation in D3 where it works out how much she has paid for our internet bill.
Thanking you in advance. And sorry if this is a really daft question. Its probably something really simple i have missed.
View 9 Replies
View Related
Nov 30, 2011
Im looking to add an update macro button so if A ""
the formula contained in say H2 gets dropped down until it hits were col "A" is blank.
View 1 Replies
View Related
Apr 24, 2006
I have a spreadsheet that is pulled automatically from an access database.
The information that is pulled is invoices that have been paid for each of the temps working for our company.
Each month I have to give a figure per cost code on how much they are accruing so that they can see how much is still outstanding.
Right so what I am trying to do is have a macro take the temps charge rate then * 40 hours and place the amount into the empty cell.
As you will see in the attachement some of the cells are coloured. The purpose of the colouring is show that a invoice has been processed and paid for that week so no value is needed in that cell.
Then total all the cells at the end.
View 9 Replies
View Related
Apr 17, 2008
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
View 3 Replies
View Related
Nov 13, 2013
how do I write a Do Loop so it will repeat the below until row A is empty? I want the sheets to be added and named based on what someone enters on a data input sheet. i.e. if there are 5 rows with data, then it will create 5 sheets named accordinlgy.
Sheets.Add After:=Sheets(Sheets.Count)
Sheets("Tab Organization").Select
Range("A2").Select
ActiveCell.FormulaR1C1 = "ABC DEF"
Sheets("Sheet3").Select
Sheets("Sheet3").Name = "ABC DEF"
View 9 Replies
View Related
Feb 26, 2008
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors.
Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View 5 Replies
View Related
Apr 14, 2014
I wrote an IF AND formular to display "Yes" for a cell with zero. but when the cell is also empty, it still returns a "Yes" instead of empty.
this is the formular:
=IF(J2=3,"Yes",IF(AND(E2="",I2=0),"Yes","No"))
when I2 = 0 it returns Yes
Also with I2 = "", it still returns "Yes" instead of "No"
View 6 Replies
View Related
Feb 26, 2008
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors. Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View 2 Replies
View Related
Nov 5, 2009
Is there a way to have the answer to a formula display nothing if one of the cells have nothing. Example cell A3= A1*A2 ... it will naturally show 0.00 but even if both A1 and A2 are completely blank. Is it possible for A3 to show nothing if A1 or A2 or both contain nothing. I still want it to show 0.00 but only if that’s what is in the other cells.
View 5 Replies
View Related
