I try to open the VBA lessions, I get an error message which says ozgrid.css missing. How may I acquire this file. I did a google search, and also a forum search before I posted this, but no luck.
View 5 RepliesI have been googling and I learned everything for free from www.ozgrid.com
I understand formulas pretty well, I can 'nest' them correctly, and I have an understanding of all the formulas listed on this page: {url}
So now I understand of formulas and excel, so I want to go to the next level. Macros.
As from the research I have already done, I am starting to understand the structure of how to write the code, but I am stuck as to what to look at next.
So far I have tried to avoid buying any books or paying for the knowledge.
Im looking for a good tutorial on how to setup the structure of the macro, what to write and when.
I have installed the free version of Ozgrid.xla, but do not see where to access it.
View 9 Replies View RelatedI have two columns which i want to compare, they contain text data such as A123.
what I'd like is if its in column A and not in Column B then add to bottom of column A.
Once its in column A i can do the vlookup's to draw the other data, costs etc, over but don't know how to identify, and add, the missing codes to the list.
I have done the two obvious checks regarding my missing Status Bar, both in View and Options and still the Status Bar refuses to show itself. I have shut down Excel with the options unticked hoping that on restarting and ticking them the bar will re-emerge but still no joy and also done vice-versa. how to get the Status Bar to reappear?
View 5 Replies View RelatedI have attached a screen shot of vlookup formula. Whilst selecting a range a little tooltip comes up showing how many rows and columns have been selected (6R x 2C) ...
... at least that's what used to happen. Now this handy tool tip does not show on my PC - and I have no idea how I turned it off, or more importantly how I can turn it back on again.
I am running Excel 2002 SP3 on Windows XP.
I have received a spreadsheet by email and when I opened it the formulas all had errors. I did a little investagating and found that when I use the viewer to open it there is an additional tab that is missing when I open it in Excel. I did check for hidden tabs but then realized that the formula would have still worked even if the tab was hidden, in this case it is just missing.
View 2 Replies View RelatedThe title bar is missing for one 2002 file. This is the same bar that has the minimize/maximize button in the right corner.
My mind is drawing a blank for a fix. I've tried the *view, tool bar, customize* and can't find the missing bar.
I have a hyperlink in my excel file which refers to cell in a separate excel file (which no longer exists). I therefore would like to remove this 'dead' link as it keeps trying to update it when I open the file.
I don't remember where this hyperlink is in this huge multi-sheet file so I can remove it! How do I have excel show me all hyperlinks and the option to remove them?
I have 2 spreadsheets. One has one type of info and another has another type of info for the same items.
For example:
1st spreadsheet has: server name, serial number, model.
2nd spreadsheet has: amount of memory for each server, number of CPUs, etc.
Note that some servers are missing from one or another sheet. So all info needs to be combined.
What is the easiest way to combine all info in a single spreadsheet?
I am facing a problem importing Excel data into a finicky graphics program. This program can't accept strings and numbers in the same column. Hence, strings such as #NA, or Excel's standard "" can't be used where there are missing values, as the entire column is then ignored.
But, I would like to provision for future data below the rows that currently exist.
Let's say I am trying to read data from Sheet1 of a workbook. The rows in Sheet1 contain formulas referencing other sheets (e.g. Sheet2!C1-Sheet2!C2). So, if Sheet2 doesn't have data in a certain row, Excel would show 0 in the formula on Sheet1. That would mess up my graph. If I use any other string or "" using a If statement for missing data, then the graphics program doesn't work.
Is there any way say, using dynamic ranges or similar, to populate blank cells in Sheet1 as data arrive in Sheet2, without a pre-existing formula being present in these Sheet1 cells? I can imagine that VBA macros will easily do this (e.g. the thread on Autofill below). But, is this possible without having to trigger a macro as and when additional data arrive?
number and number 2 is what i have.. I would like it similar to the right side of this sheet where the missing ones are at the bottom of E
sheet: ...
i have a workbook with missing dates and would like excel to insert any missing dates and add 0's into that missing dates if there is no data...
for example....
i have a bunch ofdaily rates back from 2005. sometimes ill have one or even 2 or 3 missing rates in a row. when there is a blank rate, i just want excel to calculate the average of the date below and the date after. right now, ive just been going manually to each missing date's rate and calculating the average.
View 9 Replies View RelatedI have created a 4 page chart in landscape with text in each of the 4 columns in the chart.
When I looked at it in print preview the chart did not fill the page and so to widen the last 2 columns I dragged them over to the right hand margin. I am still definitely within the right hand dotted line showing the margin limit.
The problem is that I cannot now put a border line down the extreme right hand column. Every time I click on any of the border instructions in the Font tab nothin appears on the right hand side of the box.
I want to write code that will allow me to show the Missing Names in the Old sheet that aren't in the New Sheet.
I want the code to go along these lines:
Dim a As Long
a = 2
Dim o As Long
Dim p As Long
Dim last_row14 As Long
Dim last_row24 As Long
Can anyone answer this one for me - why does this piece of code run on some machines but not on others - I suspect it is something to do with a missing library but I have no idea which one.
When the code fails it highlights the word " Date" inside the brackets
TrainingDateBox.Value = FormatDateTime(Date, vbLongDate)
Is there an alternative code?
I have been working on a pretty extensive Excel Workbook for quite some time, finished it today after testing it multiple times, everything was working fine on my PC. But after I pasted the document on one of the network drives at work, I started getting compile errors. I am getting these errors on basic functions that I used in my code such as Date, and the Left and Right functions. I figure I must be missing some sort of reference...the error I am getting is (Compile Error: Can't find project or library).
I can't understand why everything worked fine on my computer and as soon as I paste it on the network, the application blows up for my coworkers.
For some reason colors will not show on any EXcel doc. When I type colored text in a cell, it shows the color until I press enter, then it goes black. Cell fill colors do not show at all.
However when I send the doc to another computer the colors wil show.
we are currently upgrading from Win2000 and Office Pro '97 to WinXP sp2 and Office Pro 2003. I am testing our applications for compatibility and am discovering many that fall over because mscomct2.ocx is missing. Does it normally come as standard in Office 2003 or not? If not, when did it stop being standard?
View 2 Replies View RelatedI need to take in third sheet all data which are missing in second sheet from first sheet, for example:
IDName LastName
1John Doe
2Jany Tine
3Paull Marphy
4East Doe
5West Marlyn
6ThirstanWist
7SecondEast
8ExampleMiddle
9Doe Tryer
10MarlynEarly
Sheet 1
IDName LastName
1John Doe
4East Doe
9Doe Tryer
10MarlynEarly
Sheet 2
And in Sheet 3 to get result
2Jany Tine
3Paull Marphy
5West Marlyn
6ThirstanWist
7SecondEast
8ExampleMiddle
Sheet 3
I have a formula that looks like this:
=HLOOKUP('Output'!$B$3,'Input'!$B$1:$P$300,'Input'!$A3+1,FALSE)
It is working very fine, when the cell has a value, but when it doesn't - it will return 0. So my question is: is there any way to make it return certain value or word like "No value" instead of zero?
I am trying to import data from web to excel. I posted the link below to the website I am attempting to import from. The only part I need is the statistics. However, I cannot get it come thru by getting external data from web.
The goal is to great an auto updating spreadsheet with multiple sheets so copy and paste is not feasible.
[URL]
I have a list of records that for which I cannot find values for. Essentially I have a dataset that I need to match to other information but for some records this 'other information' is missing.
1. I have a list of records with missing information
2. I have a folder with a large amount of sub-directories
3. I have many DBF files inside of these sub-directories with X columns and x rows
4. Somewhere within some row of some column is a value that links to my list of records
5. I need to search for my value in, say, A2 and return the file name and directory in which it lies
6. It can be text or number
is this clear?
I have some code to generate hyprlinks from a folder
View 13 Replies View Relatedthis is exactly what i am looking for also, can you please explain how i can use that code in 2007? I have attached a list of the numbers i'm working with, please can you have a look for me?
I've tried entering it ion visual basic but i keep getting:
COMPILE ERROR
INVALID OUTSIDE PROCEDURE
I have ben given a excel file from another department at work as they had been told i know a bit about excel. Excel... Yes, Visual Basic... Nil, zilch, nada! It really might as well be written in chinese!!
What has happened is the guy who set this up has since been made redundant from the company and they now want the file to do one more thing.
Basically what they want the file to do is, when the user clicks the 'generate file' button, if E2 has no date entered then a message box pops up stopping the user from going any further until a date is entered.
i'm trying to write a sheet that records weight from a date and user input
trouble is people are likely to miss days out and i want to fill in the missing dates weight based on actual inputs from other days. if i make it easier and say it like this column A is the weight, column b is the number of days gone
as an example i've made it straight forward but left 4 values out
A1616B161
A1515B152
A14B143
A1313B134
A1212B125
A1111B116
A10B107.....................
I am looking for help. Sheet1 B1:1 has dates in each column in ascending order for one month. There are missing dates in between the days and they might look like this.
Example 1
7/1/20097/2/20097/6/20097/7/2009
Is there a code that will insert columns with the missing dates between the dates that already exist so that example 1 would become example 2?
Example 2
7/1/20097/2/20097/3/20097/4/20097/5/20097/6/20097/7/2009
Say i have a range A1 to A10 that contains these numbers
101
102
103
104
356
106
225
107
108
109
I need some code that will help me find the next highest missing number in the value range of 101 - 199 in that range A1 to A10. In this case it would be 105