Macro To Copy, Paste Values, And Remove Blanks
Aug 7, 2007
I need a macro that will take the values that are in the far right cells and move them to an area on the left. the columns they will be pulling from are the IU & IV column starting with row 2 down to row 460. from there I need the values to be pasted into the D & E Columns starting at row 6. The two columns IU & IV are a date and a task for that date. When they are pasted into the columns D&E they will need to be sorted by dates (or just all of the blanks removed), with the soonest occurrence at the top. The reason for pasting values is because I have formulas pulling the tasks and dates off of another sheet. The last thing is that the macro needs to be triggered by the information in cell c2, when that cell is changed the formulas go to work and everything in cells IU & IV update. That is when I would like the macro to kick in and work the miracle.
I have been trying to build a colony of formulas that could do it, but I have given up, then I tried to make an array index it for me, but that wasn't working for me either.
View 9 Replies
ADVERTISEMENT
Dec 28, 2013
Below is the macro code in which the code is segregating the data page wise i want the below changes:
> macro should copy and paste only values with the option skip blanks.
Private Sub CommandButton1_Click()
Dim j As Long
'Setup the loop to loop through the Areas
For j = 1 To Columns(1).SpecialCells(2).Areas.Count
'Add a new WorkSheet
[Code] .....
View 2 Replies
View Related
May 27, 2014
I am looking to see if is possible to copy and paste a worksheet and then remove data( only values not Text) and also not removing formatting and formulas
View 1 Replies
View Related
Feb 18, 2010
I have been using excel for years but have always managed to resolve issues using formula's etc but now i have had to step into the realms of macro's. I am slowly learning but urgently need help with the below problem which is bound to be a simple solution.
I have compiled a workbook for users to administrate on a daily basis. (each worksheet is a different day of the month but the same template) There are a few hidden worksheets as the info is extracted from these to run reports.
The issue/s i have is that administrators use cut, copy and paste to repeat data opposed to retyping, this messes formats, formulas and validation up. I have used a macro from the net to remove this option and it works fine. Problem is that if they do not enable macro's this will cease to be an option.
I understand that you cannot remove the option of enabling macro's but you can force. Again used a macro from the web that if you don't enable it only shows a welcome page saying that macro's need to be enabled to use. (all others are hidden) if macro's are enabled the welcome page disappears and the worksheets 1-31 reappear. Again this worked fine.
I tried putting both macro's into the same workbook but kept coming up with errors, each one i resolved led to another.
So short of it i need a instructions/macro to force macros and remove cut copy and paste.
View 14 Replies
View Related
Oct 24, 2008
Is there way i can have a macro attatched to a button that when clicked, will copy BX:BX on sheet1, remove all the blank cells and put it on D:D on sheet2. Next time it is clicked, it will put BX:BX on to the next available column after removing the blanks and so on, filling a column at a time on sheet2?
If the above is easy, it would be really good if it could paste into columns until it reaches column H and then go back to D again but paste below the data already there, then E, but below, etc. I think though that the last bit is asking a bit much and is just cosmetic and easier to print, so dont worry too much.
View 9 Replies
View Related
Feb 21, 2009
I am really amazed that I can't find a workable example for what I am trying to accomplish here...
For the most part, I can read and decipher VBA code...but when it comes to constructing my own code...I am deluged with syntax errors and run-time errors...
Here, specifically, is what I am trying to do:
I have a column...(Let's say Column A)...that contains 1300 items to start with.
Once an item is selected by the user, a new list is created in Column B that mirrors Column A with the "selected" items "removed"...(the cell is blank).
As each item is selected, (and "removed"), I want a third list created in Column C that lists all of the items in Column B, but skips the "blanks". ("Blanks" is in quotes to stress that these cells are NOT EMPTY. They each contain a formula).
Here is an example of what I am looking for: ....
View 7 Replies
View Related
Jun 15, 2012
I have a spreadsheet with a bunch of formulas in Cells B4:E100 in Sheet1. Many of the formulas will show up blank information in the event I do not have any data in Column A. I then have formulas which perform a similar function in Cells G4:Q100, S4:AC100, AE4:AO100 & AQ4:BA100.
What I need to do is to take the data from the last 4 sets of cells (G4:Q100, S4:AC100, AE4:AO100 & AQ4:BA100) and stack then one on top of the other into Sheet2 starting in Cell A2. I need the code however to be smart enough to realize that if there are blanks which exist in any of those sets of cells to skip over to the next set of data I which to copy and start pasting that set of information without leaving any blanks.
So far example, if I only have data between Cells A4:A25, I want the VBA code to go only through cells G4:Q25 and then start pasting without any spaces S4:AC25 and so on.
View 9 Replies
View Related
Jun 11, 2014
So I have two cells D15 and C15.
I simple want to copy there values (There paste links)
And paste them into the next blank row between D/E17/ and D/E26.
View 1 Replies
View Related
Nov 29, 2011
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
View 3 Replies
View Related
Oct 13, 2009
I have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.
View 10 Replies
View Related
Jan 8, 2013
I'm trying to use a macro that will copy & paste values from one workbook to another. Everything works fine until I try to get it to Paste to next available row.
It worked the first time, but after that it jumps, several hundred rows at a time.
This is what I have so far:
Code:
Sub CopyData()
Workbooks.Open Filename:="S:Production OfficeMonthly KPI Reports.xlsm", ReadOnly:=False
Windows("Weekly KPI Plan.xlsm").Activate
Worksheets("Data Input").Select
Worksheets("Data Input").[A4:AT650].Select
[Code]....
View 3 Replies
View Related
Jan 15, 2008
I have 9 worksheets in a book with sheets 1-8 used for data entry, and sheet 9 used for a weekly data upload. Sheets 1-8 are all formatted the same, they just represent different vendors. I need a macro to look through column F (invoice number) on sheets 1-8 and see if the value of each cell already appears in column c on sheet 9. If the value is not found and the row value for column M (sheets 1-8) is >0, I need to copy the data from columns D:K and paste special values into the next blank row on sheet 9.
Basically I'm trying to see if I've already paid an invoice, and if not then I need to automatically add the data for payment. I've tried to mess around with a VBA code myself and ended up with a migraine every time. I've also tried to use the advanced filter, but the cell values I need to copy over contain formulas and conditional formatting...not to mention I can't delete the data on sheet 9 that has already been added.
View 9 Replies
View Related
Sep 18, 2009
I am trying to develop a macro that allows the user to copy and paste a set of date and time values, move them to the next sheet and increase the month by 1. I need help trying to find out how can I create a counter for the program to keep running without the need to reprogram the macros again.
View 14 Replies
View Related
Feb 17, 2014
I got a macro to copy and paste values onto another tab within my worksheet. I have a lot of data and currently takes about 30 seconds to calculate and paste. Not sure if its an issue with my macro or with my computer (Mac - Excel 2011).
Here is an example of my macro:
Sub SimulateWeek()
If Range("AdvanceWeek").Value = "Week 1" Then
Range("Week1B").Copy
Sheets("Schedule - Results").Range("C2").PasteSpecial Paste:=xlPasteValues
[Code]....
(this continues on until 'ElseIf Range("AdvanceWeek").Value = "Week 31"....etc). So you can see I have the same code repeated 31 times.
View 2 Replies
View Related
Feb 16, 2010
I have a folder containing 40 single sheet excel workbooks and I would like to automate following tasks:
- Open each excel file (need to open the file so as to update it since it gets the data from another workbook through =formulas)
- Copy paste as values
- Save this as excel html in the same folder as original excel files (keeping the original file name)
- Close (original excel file should not be changed ie formulas should remain in place, only the html file will contain values)
- Since there will always be xHtml files with same name need the macro to replace the excisting file
My abilities with excel are limited to functions, no VBA knowledge other than finding ready codes and pasting them in the module.
Since this routine is to be run almost daily the macro should run all files, instead of one by one.
I just hope that I am not asking too much for excel to handle and I hope that explanation is clear.
View 9 Replies
View Related
Nov 24, 2012
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
In this folder I have workbooks called:
Function1
Function2
Function3
In each workbook I have 4 worksheets
Cashable12-13
NonCashable12-13
Total12-13
GrandTotal12-13
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am using Excel version 2003.
View 1 Replies
View Related
Sep 4, 2009
After using Copy/Pastespecial in my macro, when it completes I have the flashing border around the range that was copied, (like you do when you do it manually).
What line of code do I need in my macro to make this go away?
View 3 Replies
View Related
Jun 26, 2009
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies
View Related
Apr 23, 2009
I imported data in to column A and it looks like it inserted a question mark (which I think represents a space or tab )before about half the names.
So when I import the data in my contact manager it inserts a square and throws off the import.
I know it is a simple question but have not been successful.
I am using Excel 2007.
All I want to do is copy and paste the data and remove all those question marks. I would assume it is simple as pasting with "remove formatting" but I am not seeing that option.Plus they are names so I want to keep capitalization etc.
I also tried pasting in a text file to remove formatting and paste in the text file.. (the names ended up indented) and then "paste special" back in to excel with no formatting .which I was able to do in 2000 but with no luck with 2007.
View 9 Replies
View Related
Jun 20, 2013
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
View 9 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
Jul 10, 2009
Data is in a horizantal list, say row 2:
A2: SAM
B2:
C2: MARY
D2: JOE
E2:
F2: DAViD
i.e. like this:
SAM-blank-MARY-JOE-blank-DAVID
I am looking for formulas (not VBA) to compact this list by removing the blanks so the new will be placed in K2, L2, M2 etc. as follows:
SAM-MARY-JOE-DAVID
This is a good article but only works on vertical lists:
[url]
View 12 Replies
View Related
Oct 24, 2006
I need to generate a list of items from a column of data which frequently changes. In the attached example, I need to list all entries other than those that are blank (NB - the data generates the numbers as text and the blanks as "").
View 8 Replies
View Related
Nov 24, 2008
I'm currently using the following code to concatenate several cells into one cell, but it also displays the cells that contain blanks.
View 5 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
May 13, 2012
I would like to be able to make the same thing and select items for my drop down list, that are not blak and follow a specific condition. But I don't know how to include the condition in the array formula.
The condition I need is follow:
I want to have a dropdown list with Items that are not blank, and First N > Last N.
[URL]
It would be preferred to have formulas.
View 5 Replies
View Related
May 29, 2013
Some code that will remove blank cells from across five columns (A:E) so that after running code all data in each column moves to the top of sheet?
View 9 Replies
View Related
May 18, 2008
I need a listbox or combobox in an excel form whos list is created from 2 ranges. for example first name is range a2:a500 second name is rangne b2:b500. the list box should list both coloums in a single list and return the row number. better still if it does not list blank ranges. i have never used a list or combo box before so please explain in terms a simplton can undrstand
View 7 Replies
View Related
Feb 7, 2014
By using a macro on the attached report I like to copy the row values named "Section Total" in red and and paste them over the values starting with "Aged Debt" in blue (the rest of the wording cahanges every month so "Aged Debt" is the key word for that row).
View 1 Replies
View Related
