Macro To Paste Data After Checking Text In Cell
Aug 1, 2012
I am writing a macro that will allow me to copy all the data in a set range (A2 and below) after checking that B1 contains the text "Year_id".
Right now, I am able to copy all the information, and paste it onto "Sheet 4". I am unable to code for the part where the macro would check for the text. The code that I have (for copying-pasting the date) is below.
Any code that would check the information in B1 into this macro code below:
Code:
Sub Copy_Allinfo()
Dim Sht As Worksheet
Dim Rng As Range
For Each Sht In Sheets
If Sht.Name = "Sheet4" Then
[Code] ........
View 7 Replies
ADVERTISEMENT
Apr 1, 2014
I have a report that runs, and it shows users that are in different groups. Within each group are primary users, and sometimes secondary users. Attached is a spreadsheet showing an example of the report in "A7:A52"
What I want to do is have a macro scan column A, and if a group is found, create what I have made in the rest of the spreadsheet (CD6 and below). I manually filled in the data for group 1, and would like it to continue off to the right in the same format.
There are some areas that dont have groups, such as there might be group 1, group 2, and then nothing till group 10 (as shown in the example)
View 12 Replies
View Related
Mar 24, 2009
My problem is that data from previous applications are "bleeding" into new applications while running my macro.
I am utilizing the macro below to paste an application and then to convert the application to upper case in addition to some additional formating changes. After performing the macro I save the newly created document to a different folder. With new applications I repeat the above steps.
I tried to incorporate the clearing of the clipboard in my macro using: Edit=>office clipboard=>clear all. The keys strokes during the " record macro" process do not seem to record in the macro.
I am using Excel 2003, SP2
Sub Process_Application()
'
' Process_Application Macro
' Macro recorded 3/23/2009
'
'
ActiveSheet.Paste
Columns("A:A").Select
View 9 Replies
View Related
Jul 10, 2014
The following code doesn't check null condition in Scannedby field. The scannedby has text data type. The code gives me all the data where scandate=20130722 but doesn't check that scanned by can't be blank.
[Code] .....
View 5 Replies
View Related
Jan 6, 2014
In Sheet1, column Y looks into Sheet2 and returns the status of that specific order - the result displayed in column Y will be either blank or a variety of text strings (eg. received, pending etc).
I need to make a macro that looks into all the cells of column Y in Sheet 1 and copy/pastes as value into that same cell only if the formula in that cell returns text string "Received". It should not affect the other cells where the formula is returning either blank or a different text string.
View 1 Replies
View Related
Nov 5, 2013
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
View 3 Replies
View Related
May 14, 2009
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
View 8 Replies
View Related
Mar 6, 2009
i have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.
View 10 Replies
View Related
Mar 6, 2009
i have a problem counting the number of characters in each cell in column "A" in a sheet and checking if number of characters in a cell exceeds 5 characters.
View 8 Replies
View Related
Feb 4, 2014
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
View 1 Replies
View Related
Dec 13, 2013
I want to create a macro to paste some data into the next empty cell. Below is sort of what I need but this show it going to a particular cell, I need it to got to next open cell in the range from say BY3. So next macro run it would copy and paste the data from T3:T9 (always this range) to BZ3 then CA3, CB3 and so on.
[[Sub CopyData()]
'
' CopyData Macro
' Copy The Data To Build Graph
'
[Code]....
View 1 Replies
View Related
Mar 12, 2007
in writing a loop that will check a number of cells to see if it is emtpy, if it is not, then run the macro. If the cells are not empty it will copy the data in that row and paste it to another sheet and delete that line. If it hits a cell that is empty, i want it to skip that row and move on to the next row.
here is the macro that moves the data.
Sub movedata()
Range("A1:H1").Select
Selection.Copy
Sheets("Sheet2").Select
ActiveSheet.Paste
Sheets("Sheet1").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Range("A1").Select
Sheets("Sheet2").Select
Rows("1:1").Select
Selection.Insert Shift:=xlDown
Range("A1").Select
Sheets("Sheet1").Select
End Sub
View 9 Replies
View Related
Apr 26, 2013
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
View 2 Replies
View Related
Nov 4, 2009
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
View 9 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Apr 27, 2009
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
View 10 Replies
View Related
Jun 29, 2014
I need to create a macro to do the following:
Search the activecell for a text string (a), and then either paste in text string (b) at the end of the cell if (a) is found, or text string (c) if (a) is not found.
For example, if the activecell has "AA/" in it, I want the cell to become "AA/01" (pasting in "01" at the end), and if the cell has just "AA" in it, I want it to still become "AA/01" (pasting "/01" at the end). The macro will be linked to a commandbutton.
View 7 Replies
View Related
Dec 29, 2013
I have lots of rows of text data on sheet 1(Q2:AB139708), on sheet 2 I have a list of text (A2:A44). In sheet 1 I would like to display "1" in cell ap2 if any of the row from (Q2:AB2) contains text from the list on sheet 2(A2:A44), then I would copy this down to 139708.
View 9 Replies
View Related
Oct 9, 2008
I have an Excel sheet set up with 6 columns: Col A contains a user-entered date.
Cols B-E each contain a drop-down that the user can set to 1 of 4 options.
Col F (I want) to show a date based on Col A & the results of the drop-downs.
The drop-downs contain (in order of importance): "Immediate","Urgent","Routine" and "None". If any of them are set to "Immediate", the date in Col F should be Col A date+2 days, if any set to "Urgent" it should be Col A+14 days, any set to "Routine" it should be Col A+28 days and for None the field can remain empty. I can enter a formula in F2 that checks for B2's drop-down as follows:
View 4 Replies
View Related
Aug 23, 2013
I have a few macros that run until line x currently. I've tried to incorporate xl down into my macro but must have misplaced it. I need to paste until the last line of text in column B.
Sub vlooktest()
'
'
Range("C4").Select
ActiveCell.FormulaR1C1 = _
"=VLOOKUP(RC[-1],'Raw List'!R1C1:R26000C9,3,FALSE)"
Range("D4").Select
ActiveCell.FormulaR1C1 = _
[Code] .......
View 3 Replies
View Related
Mar 31, 2014
So ive got this macro that will find the text "SEP" in the active worksheet and paste it into the new worksheet. The Macro looks to see if a row contains "SEP" and copy that whole row and paste it into the new worksheet. I have over 5000 rows in column A that contains "SEP0014A9713685" and "SEP0014A981785C" So they are all different so its not just finding "SEP" So i need some type of Contains "SEP" for column A. This is the macro i have right now.
' Devices that contain SEP
Dim strArray As Variant
Dim wsSource As Worksheet
Dim wsDest As Worksheet
Dim NoRows As Long
Dim DestNoRows As Long
Dim I As Long
[code].....
View 3 Replies
View Related
May 3, 2007
I've created a form and would like to use a macro to transfer the form information details (form) from an intermediate worksheet (database intermediate) to the main database worksheet (database).
So far I've only been able to record a simple macro that will do just that. However, when I click on my assigned macro again, the information is washed away and the new form details have replaced it. Been trying to use the x1down coding to make it such that each new data goes onto the subsequent line? But I can't seem to get it right without getting an error message.
I've attached the file to give you a better picture,
View 5 Replies
View Related
Apr 29, 2014
how to checking data in 2 column each row, if partial/altogether string is match, shown "ok" otherwise show "check" with data in column a as parameter..
View 3 Replies
View Related
Dec 27, 2013
I'm trying to make a game where from a choice of 16 words the contestant has to choose four of those words that, when another word is placed before or after each word it makes a phrase.
e.g From this list of 16 words
albert
bell
[Code]....
choosing bell, bottle, print, stocking can all have BLUE placed before them to make bluebottle, blueprint etc. That would be the correct answer. Choosing their four words would be from a drop down list of all 16 words, separate cell for each list options/chosen answer. bell bottle printstockingCORRECT
There would be 4 rows in total for 4 different answers to be made from the 16 words on offer. I have tried everything to get it to work in the 5th cell but it's difficult.
View 3 Replies
View Related
Jun 29, 2014
in my work sheet I need to Hide & Unhide some text box By checking a checkbox it means if user mark the check box the text box will be appear & if uncheck it the text box will be hidden
View 11 Replies
View Related
Mar 4, 2009
I have a workbook with many sheets in it. Within each sheet there is a cell with the Text "March 09" there are then 3 cells to the right of this cell with relevant information. Is there a Macro that can search for this text March 09, then copy this and the 3 cells to the right of it and paste special this information 1 cell below for all 4 cells.
View 2 Replies
View Related
Mar 3, 2014
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies
View Related
Sep 11, 2012
Trying to write function statement that does the following:
IF cells C9:E14 contain any of the following: "Termination" or "Forms" or "PWE" or "TSA" or "3rd Party", then cell would show "Provided Date (If Applicable):",""
This is my best shot at trying to get it to work, but it wont, no matter what iteration I try.
=COUNT(IF(C9:E14="TERMINATION",IF(C9:E14="FORMS",IF(C9:E14="PWE",IF(C9:E14="TSA",IF(C9:E14="3RD PARTY")))))>0,"PROVIDE DATE (IF APPLICABLE):","")
View 2 Replies
View Related
May 9, 2008
I want to copy text from a range of individual cells and then paste all of the individual cells copied and paste this data into a single cell with all the text separated by hyphens between the texts.
Example attached
If you are a macro writer i have a project that i need to complete. you will be compensated for your time.
View 9 Replies
View Related
Mar 28, 2014
I have two worksheets. Sheet 1 has 2 columns, Column A the restaurant's name and Column B contains the review score. So sheet 1 is kinda like this:
Restaurant |Score
Ruby Tuesdays 80
TGIF 78
Outback 92
Sheet 2, Row 1 column B-E contain restraurant names (only on the top row, like field names).. i.e. I manually put the date in because typically the projected date is different from the actual review date.
-A----------- B ----------------C ------D-------- E-----
Date |Ruby Tuesdays|Olive Garden|TGIF|Ruths Chris|
I need the data from Sheet 1 Column B moved to sheet 2 in the next open row (i currently have data in row 1..the field names and down to row 35). This will be continuous so each time i need it to add the score as a new row in the correct field (restaurant name), IF the restaurant isnt listed, I want a new field named with the restaurant name and then place the score in the correct row and column. So, in the example I'd need Outback added.
View 9 Replies
View Related