VBA - Appending Weekly Worksheet Data To Master Sheet
Feb 21, 2014
I've a workbook with two sheets 1)'weekly' and 2)'summary.'
Weekly is divided into products (up to a maximum of 8) with a fixed number of columns (4) directly below but a varying number of rows beneath as follows:
Product A (main header)
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
--couple of blank rows--
Product B
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data
--couple of blank rows--
Product C
Issue|Serial Number|Analysis|Comments
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
data|data|data|data
..etc...
This weekly data must be appended into each product's respective grouping within the 'Summary' tab. With the following small additions: 2 additional columns filled with the model and current week must be inserted beforehand:
Summary page will contain the groupings of Product A through H. The weekly may only contain 1 (say Product D) in any given week, or all 8.
I realize there are more efficient ways of doing this, i.e. pivot tables, creating discrete tabs for each product, etc... but I've been tasked by the higher-ups to generate the above as I've laid out.
Copying data from multiple worksheets, but my problem is quite the reverse.
I have data for each month as a worksheet from 1970-2012. They are in a workbook with the recent years at first and the oldest years at the end/..
Like 2012Dec,2012Nov...............1970Feb,1970Jan
I would like to know how to write a macro to copy a range of data from Jan 1970 then add data from Feb 1970 and so on until Dec 2012.. The range remains the same throughout all the sheets.
I was able to do a rough code, but I am stuck doing the reverse part...
Code: Sub ReverseList() Dim Sht As Worksheet For Each Sht In ActiveWorkbook.Worksheets If Sht.Name "MEGA" Then Sht.Select Range("A:A").Insert
[Code] ..........
Also is it possible to restrict the range selection in each sheet based on the month and year?? For Ex. Accounting for leap year and 30 day months...
Attached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.
The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.
for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.
In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.
This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")
Next, need to manually change cells C2:G2 each week to reflect week titles correctly.
For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.
The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).
We have folders of daily cash collections stored in such a manner, yearmonth. In every month, we will have worksheets sent by the end user to the finance dept, naming it using mmdd. (The folder in the drive will reads: C:Daily Cash Collection2013), (C:Daily Cash Collection2013 0104.xlxs), (C:Daily Cash Collection2013 0115.xlxs). I intend to put the master list outside the year folder, meaning, in the Daily Cash Collection folder (C:Daily Cash CollectionDCC_2013.xlsm). When I have a new folder for year 2014, my master list will be here (C:Daily Cash CollectionDCC_2014.xlsm)
I am looking to automate this opening of all the daily worksheets, select all data except the header row, and copy it into a master list (which will be data for the whole year, with 3 months of the previous year data).
The data in the daily sheets, it will have collections of the same Debit Note number from the file sent earlier. Meaning, if the file was sent on 0104, there is a DN0114-0002, collection of $50. In another daily sheets 0115, it will also have a collection of DN0114-0002 of $20. This 2nd information of $20 will also need to be captured as the payment in 0301 is partial and incomplete.
I will need to copy the daily sheets into the master list every now and then. Is there a way to check and copy the daily sheets and not repeating it and missed out one?
In another words, if I had already copied Jan sheets into the master list, will it look for the next worksheet that I had not copy and copy according the DN number? (it will be in running number but sometimes will have DN of the previous month due to the partial payment ealier).
Alternatively, if this is too complicated, how to insert a macro to copy all cells except the header (will be in fixed column and the first row will be fixed) from an open daily sheet, find the last row in the master list and copy it to the master list, and after copying, unclear the selection of the daily sheet and close the daily? Where can I put this macro as the daily sheet is from the end user. I can only put it into my master list, but my problem is, the file name of the daily sheet is not fixed, it depends on the day the end user saved and email the data to Finance Dept.
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
Each month I get a report that is formatted by the customers and this sheet never changes. The problem is that the master sheet my job uses is not formatted this way. The master workbook has several sheets that breaks down the data from the monthly sheet. Instead of having to enter the data manually I'm looking for a way to export the data from the monthly sheets into the master workbook. As I stated the sheets are all the same but come from different providers and all contain the same amount/style of data.
I receive a monthly download of individuals call-logs in one "Master File." For internal reasons, I need to separate every person's monthly call-log into individual worksheets. Unfortunately, the file is very large and copy/paste is very time consuming. I am operating on MS Excel 2007.
I'm trying to consolidate data from many worksheet to a master worksheet. So far, thanks to the help of some experts, i've got this code. But i need to tweak it further to suit my requirements.
Sub CopyDataToConsol() Dim Sht1 As Worksheet Dim Sht2 As Worksheet Dim SrcRg As Range
How can i tweak the above code to:
1) copy the lastest updated row to the Master sheet, instead of copying the whole set of data over and over again..
I have a master spreadsheet that list several columns about employees(name, date, event name, etc.). Then I have an indivdual sheet for each employee. I am trying to import the column information for each employee onto their individual sheet based on their name. It is possible to import the individuals data from the master sheet to the individual sheet based on the employee name?
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN SHEET-2 CCI CONTAINS ONLY 19 COLUMN FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
I have a workbook named as "DCR_Summary". In the sheet "FX", I want to get the sum of a specific column from two different workbooks named as "WNCR REPORT" and "DCCR-REPORT". The name of the column is "FXCOLL". The summation should start in row 7 all the way down where data is available. The good thing is that, my sum range will always starts at row 7 in both files but the bad thing is that the position of column "FXCOLL" is changing every day. The expected result is shown in the attached "DCR_Summary". It should pick at the same time the Sheet names where the summation came from. Sheet names is also changing and sometimes the FXCOLL is nil, hence, 0 value can be returned.
i have a worksheet that has information filled in columns A-N and rows 3-7262 (not including title and labels)
i need a macros that will separate this data into multiple worksheets based on the word in Column A; these words could be HDA, CCR/NHT, GRU/ATU (essentially dividing this data up by area name, there will be 14 worksheets)
i would also like to be able to update this master worksheet and have it be reflected in the multiple worksheets that are divided by their areas.
I have a large data ... my problem is that I want the data is segregated automatically without manual filtering. in my data there are approximately 1000 individual name data, i need information about one person automatically segregated in one worksheet
A B C D
[Code]....
for example; in the table we can see the red colour font in column D, that is the name person, what i want is data for one person automatically transfer to another sheet..example : Annamalai data to Sheet2, Koh Che Kuan to Sheet 3, Rashidah to Sheet 4..etc
I have a master sheet that contains all data relating to a particular Agent like Agent Code(Primary Key), Name, Bank details etc so on and so forth. Every month I have to make a new sheet which contains only a few of the columns from the master sheet. I have to manually select and copy each column for the specific agents to whom I have to make the payments. Now, I wanted to know..if there is any way in which I can enter only the Agent Code in the new sheet and it will look the code up in the master and copy the values of the relevant fields from the master to the new sheet.
Here is my code thus far - it seems to go through the directory and copy data (single columns of 101 data-points) from the workbooks, but does not successfully paste it into the master-workbook (error message reads: 'paste method of worksheet class failed').
VB: Sub LoopThroughDirectory() Dim MyFile As String Dim ecolumn MyFile = Dir("C:Documents and SettingskbriemMy DocumentsErindi_i_vinnsluEXCELprufa1")
I have a workbook with multiple worksheets. Each worksheet is a set o data from a certain year. I want to create a macro that automatically copies the data from these worksheets into a master worksheet that can easily be used to make a pivot table.
I have tweaked this code in order to accomplish my requirement. I have in all 35 worksheets in a workbook. Out of 35 sheets, 31 worksheets are infact the 31 days of the month starting from 1st July to 31st July. What I want to do is copy and append all the rows in column A (starting from row 2) of all these 31 worksheets into one master worksheet. Basically, appending the rows in col A from all the worksheets together in master worksheet.
Sub append_master_sheet()
Dim wAppend As Worksheet, wSheet As Worksheet Dim LastRow As Long
Set wAppend = Worksheets("Master")
For Each wSheet In Worksheets If wSheet.Name wAppend.Name Then
End Sub This code when run gives me a Debug error "Object variable or with block variable not set". I did a research for this error on Google and most of the answers are in reference to using ADO Recordsets. I am not even distinctly using a Recordset in this example.
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
I have 2 different worksheets having similar format (header rows/columns) but different data (values). I need to pull out these data based on their values, means if cell is blank leave that cell and move on, but if cell has some value then pull that value with its corresponding row & column headers to place into a simple table to further use it for PivotTable. The number of rows and columns are equal in both worksheets.
So basically, the proposed function will run a check on both worksheets within a specific range of cells for their values and if not blank, it will fetch that cell value along with its relevant row header and column header and place all these attributes into the destination worksheet.
Hope I am quite clear with my query. with the required function to ease my life?
I have to input information into a master worksheet which contains data (employee names, location, start date and client) that then needs to be repeated in several other sheets. I want to input the data into a master worksheet and then automatically populate the other sheets with the data. If the data could then be filterable on each sheet that would be good.
I am searching for a formula or simple macro to select text data from column named "SM NAME" to corresponding worksheet. I need this to populate as many worksheets as there are SM Names. ( there are usually 10 SMs)
For Example in the Master Data there are Several SM names listed. I need to extract the "ID" and "Agent" columns in the Master and populate into the workshhet with the Approriate name tab. The Master list changes regularly.
appending excel sheet number in a formula. Here is the example.
In an excel book, I have sheets 1 to 50. In each sheet i have a standard format to enter the details. And in one sheet I want to keep some summary with required cells. I made a table by applying formula, for example in cell A1 i kept formula ='9'!$D$9. In this '9' refers sheet9. In the similar way i want to capture the data from all sheets.
Is there any formula to append the Sheet number automatically (like dragging the shell) intead changing sheet number manually. because it is wasting so much time.
I have a download of public records from a local County Auditor, regarding property ownership. However, the data, as it is provided is incomplete. I have obtained, from another source, much of the missing data and would like to append the original data.
I don't know if this is even possible, but in 'Googling' it, I am optimistic.
I have attached an Excel 2007 spreadsheet with a sample of the County data on Sheet1 and the data that I would like to append on Sheet2.
Sheet1 lists the parcel number (A), and information regarding the last five recorded sales. B: Sale Date C: Deed Type D: Buyer Name E: Recording Number F: Sales Price G: Multiple Parcels ("Y") H: Notes I: Loan Information.
Then the B-I information is repeated four times (J-Q, R-Y, Z-AG, and AH-AO or also defined as columns 10-17, 18-25, 26-33 and 34-41) for a total of the last five sales.
Sheet2 is a listing of sales with similar information. A: Sale Date B: Parcel Number C: Buyer Name D: Sales Price E: Recording Number F: Deed Type G: Multiple Parcels ("Y") H: Notes I: Loan Information
What I hope to do is this:
If the 'Recording Number' (E) on Sheet2 matches the 'Recording Number' (E) on Sheet1, then replace the eight columns on Sheet1 with the data found on Sheet2 (pertaining to a specific sale number).
If the 'Recording Number' (E) on Sheet2 does not match any 'Recording Numbers' (E) on Sheet1, replicate the (unmatched) data (from Sheet2) on Sheet3.
My hope is that this will give me updated, and more complete, data on Sheet1 and also show me all the data that did not match on Sheet3 for me to use later.
I have included headers on both sheets in hope of making things clearer to the reader.
transfer data from several sheets to a master data sheet. The problem I am having now is there are couple blank cells. My code just ignore the blank cells on the master data sheet and paste next to the last cell with content. For example I attached a test excel. with my code. I want to leave the blank cell as it is to keep the same product in one row. below is my code.
VB: Sub Copypaste() ' ' Macro8 Macro For Each ws In Worksheets
I am trying to get specific data from several worksheets and put it into a master list. My biggest problem is the the primary sheets are constantly updated and would need to extract some data fromt the master list for these updates.
What I have now is working fine, but I have to duplicate some of the data whenever I add a new sheet.
Can this be done using formulas or do I have to learn some VBA or use of macros?
I have Sheet1 with point numbers in column A; X, Y, and Z coordinates in columns B, C, and D. Other sheets are the same format for different jobs! I would like to be able to have all points in the master list and accessable from all sheets when the jobs overlap and same data is requested.
I am trying to write a macro that will go to one workbook after another, select a large range and paste it to a master sheet, then repeat for the second workbook but this time paste in the next available row.
I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook. Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff. Each worksheet will be identical, using columns A-I with row 1 having the headings:
Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell). There will be a varying number of rows in each of the individual sheets. If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.
