Percentage Calculation Using VBA Macro
Jun 11, 2013
In the Excel sheet i have 2 tabs
1st tab name :Percentage
2nd tab name :Defects.
Need VBA Code for the below scenario :
In the Defects sheet it should perform the autofilter by selecting the Criteria as Severity as Critical and Status as Closed and finally it should take the count of visible cells and it should populate value in the sheet1 (Percentage sheet) in the Critical defects closed field .
Again it should perform the autofilter by selecting the criteria as severity as Critical and status should (New,open ,reopen,retest ,pending closure)and finallu it should take the count of visible cells and it should populate value in the percentage sheet in the Unresolved defects field.
Now percentage calculation should be performed between the Critical Defects closed and Unresolved Defects.
Here is the formula= Critical defects closedUnresolved Defects * 100.
How to perform this Scenario through VBA Macros.
Please find the attached sheet : sample.xls
View 1 Replies
ADVERTISEMENT
Apr 16, 2014
I am trying to get my variance percentage to calculate correctly but I am struggling when it comes to one of the value being zero. It works fine for the below example when both the variance and last year figures a zero.
Last Year This Year Variance Percetage
0 0 0 0.00% IF(Last Year=0, "",Variance/Last Year)
0 100 100 0.00% This should be 100%
View 6 Replies
View Related
Jul 2, 2013
In the attached table the fees generated are on a sliding scale and the total is the fee generated within these ranges
I would like a formula in b10 to give me the value based on the total sale figure, i.e. 80.00. I've searched the board and tried some very long "if" statements and "lookup" table but to no avail.
Is there a formula I could use to calculate the desired value, preferable using cell references and not the actual values.
Sale Value
% Fee
Upto 2000
1%
2001 to 3000
1.50%
[Code] ........
View 2 Replies
View Related
May 26, 2014
I want to calculate % increase with time related fields
Field A1 = 01:53 (formatted custom as mm:ss) happy to format some other way
Field A2 = 02:08 as above
I want to know the % increase. The correct answer is 13.27% , as 01:53 = 113 seconds and 02:08 is 128 seconds and 128/113 = 1.1327 so 13.27%
View 6 Replies
View Related
Oct 7, 2008
I am a Safety representative and on a monthly basis I have to check for seat belt usage. I can not, for the life of me, figure this out.
I have attached an example. In the example out of 22 vehicles there were 2 individuals not wearing seat belts. So cell J4 should be 91%
I can calculate % not wearing with [=sum(D4:E4,H4:I4)/SUM(B4:I4)]
but I want to show % wearing.
View 2 Replies
View Related
Aug 21, 2013
This is so simple, yet Excel doesn't give the correct value. So, here you go, I only have 2 Cells and 2 Labels. One Label for one Number and the other Label for the other Number.
For the Pie Chart I chose Cells:
Cell B36 with the number $54288
Cell B39 with the number $166113
By simply viewing this one can see one of the Percentages should be around 33% and the other 66%. However, Excel gives it a Percentage of 25% and 75%.
How can I get the correct values?
View 2 Replies
View Related
Oct 22, 2007
i am having a hard time in my microsoft excel class
for the life of me i cannot think of a formula to answer the question below
every time i type in =(c3)-25-80% i get the wrong answer
i know there has to be a different formula
Cost of visit= $113.00
Q=Your have a co-payment of $25.00 and the insurance will pay 80% of the remaining cost. Create a formula for the visit that will calculate the total amount you will have to pay.
View 4 Replies
View Related
Jul 3, 2014
I have a percentage calculation that I need to ensure excel does not round up the last digit.
My calculation is 2463000(cell:I13) divided by 257000(cell: I14+I15)
Excel calculates this value to be 0.958365759
However I need it to display and re-use only 0.9583657 as my calculation has to be precise to 7 decimal places.
If I use the formula =ROUND(I13/SUM(I14+I15),7) then excel returns the value 0.9583658 - it rounds the last digit up.
I have tried to use the option "Set precision as displayed" and set my decimal places to 7 but this still sees my 7th digit rounded up.
How do I set it so the 7th digit is not rounded up.
My original formula is =IF(AND((L3+L8+L13)<=O3,(L3+L8+L13+L18)>O3),((O3-(L3+L8+L13))*I18/L18))
I have updated it to be =IF(AND((L3+L8+L13)<=O3,(L3+L8+L13+L18)>O3),((O3-(L3+L8+L13))*(ROUND(I18/L18,7))))
View 9 Replies
View Related
Oct 6, 2009
I am building a conversion calculator on a userform. There is a textbox I've named "UserPctOff" where the user enters their value. I've got a label that I'm using to record the converted value. I keep getting Type 13 Mismatch error.
Here is my code.
Private Sub UserPctOff_AfterUpdate()
UserPctOff = Format(UserPctOff.Value / 100, " Percent")
LabelMDRate = UserPctOff.Value / (1 - UserPctOff.Value)
End Sub
View 4 Replies
View Related
Jun 26, 2009
I'm trying to do a forecast of my organization's budget for the next five years and need to create scenarios where certain figures will either be increased or decreased by a specified percentage that varies from 5% to 20%. I have recorded eight macros that can accomplish this task, but I feel like there must be a more effienct method.
In addition, I would like to increase or decrease the figures from either column H or column J. Column R is the results column. This is the macro I recorded that provides for a 10% decrease:
View 5 Replies
View Related
May 18, 2014
Display progress bar with percentage completion.
The below code just display macro is running without notifying user the percentage of completion.
[Code] .....
View 2 Replies
View Related
Sep 24, 2008
I am having a big problem with recalculating cells after running a macro. The macro runs at a great speed, but once the calculation is switched back to automatic, the cells are not calculating fast enough. I waited for 4 minutes and it still had not moved past 0%. The worksheet has approximately 9000 rows out to IG columns. 85% of the cells contain an if-then formula.
View 9 Replies
View Related
Dec 3, 2009
Is there a way to delay the result of a cell formula by three seconds or so? For example, I need to delay the result value of cell B12 for 3 seconds.
View 9 Replies
View Related
May 6, 2014
I am struggling with the calculation of time in excel and cannot find a reliable solution for it using formulas. The reason is, excel does not display negative time values, unless one formats the results as text. This is no good, as I need to add up those results and that's something excel cannot do with values formatted as text.
Therefore I am aiming to do just that by using a macro. The values in columns I & J should simply be converted and pasted into columns U and V respectively (see attachment). For example 200 minutes should appear as 03:20 [hh:mm]. Accordingly, -200 minutes = -03:20 [hh:mm]
View 2 Replies
View Related
Jan 6, 2008
I want to do simple calculation using Macro in MS Excel 2007..
All the data is in Sheet1 ( Which is 13a ), the calculation is in Sheet2 ( Which is work ) and the result of the calculation will come out in Sheet3 ( Which is result )..
Here is my coding..
View 12 Replies
View Related
Nov 3, 2008
I am extending rows on a salary schedule. As you can see below, the rows include: Bargaining Unit (GP) Schedule(2A) Range(5) Step (A) Hourly (S) and the hourly wage(11.52)
GP,2A,5,A,H,11.52
GP,2A,5,B,H,11.82
GP,2A,5,C,H,12.17
GP,2A,5,D,H,12.5
GP,2A,5,E,H,12.88
GP,2A,5,F,H,13.22
GP,2A,5,G,H,13.61
GP,2A,5,J,H,14.18
GP,2A,5,K,H,14.71
GP,2A,5,L,H,15.26
GP,2A,5,M,H,15.83
The Steps currently go from A thru M but I need to add N thru Z and after step M there is a 3.75% increase for each step.
You can see that this is a csv file (comma delimited). All of the other info needs to autofill and only the new steps (N-Z) will change and the wage for each of the new steps. The last row is 2 decimal points.
View 8 Replies
View Related
Aug 20, 2009
Example: I have Sheet 2 set to autocalculate on activate using vb. So when you click on that tab "Sheet 2" it will autocalculate.
My Question is, I have another macro that is copying information between Sheet 1 and Sheet 2. And I don't want calculation to occur during the macro but since it has to select Sheet 2 it performs the autocalculate. Do I have any options to prevent the calculation from occuring when I run my copy paste macro? I only want it to autocalculate when the user selects sheet 2
View 4 Replies
View Related
Mar 7, 2008
I have a Worksheet_Calculate Macro running in my workbook. I'd like to disable it temporarily when running another macro because its causing excel to run sluggishly.
View 3 Replies
View Related
Sep 29, 2012
I would like to write a macro that can return the number of hours worked during the night shift.
In this case, the night shift starts at 21:00pm and ends at 6:am next day.
The column "I2" returns the number of hours worked during the day - formula ((F3-C3+(F3<C3))-(E3-D3+(E3<C3)))*24);
The column "J2" gives the overtime hours taking into account the number of regular hours allowed - IF(OR(I3="",I3<6),"",IF(I3>H3,"",I3-H3));
Cells "C3:F13" allows users to set up (using a data validation list) starting time, lunch in, lunch out, end time ( columns C and D AM; E and F PM);
My question is: How can I calculate night hours in column K, without having conflits with numbers returned in column I (worked hours)? Is it possible to write a macro for this?
Below please see the table:
B
C
D
E
F
G
H
I
J
K
1
Name
Start Time
Lunch In
Lunch Out
End time
BREAK?
Regular hours
Worked Hours
Overtime
Night Shift
[Code] ......
View 1 Replies
View Related
Apr 21, 2014
What I want to do is place a lap time into 2 columns (representing each lap), then excel chooses the lowest number in the two columns on the same row, paste it into another column, and then automatically sort, while keeping the first column static for 1, 2, 3, 4, 5 etc
So what I want is
Column A | Column B | Column C | Column D | Column E
1 | Driver Name | 14.004 | 14.102 | 14.004
I want Column A to remain in tact, never changing, 1-50. I want Column E to hold the fastest lap time calculated from C and D. Then I want excel to automatically sort Column E from lowest to highest, while keeping Column B with a specific driver name in line with their respective lap times. Column A is not a 100% solid requirement, but auto sorting Column E after it's calculated the minimum value of C and D is.
View 11 Replies
View Related
Sep 29, 2011
I have a range of cells ( C2, C5, C8:N1007, P8:P1007 ....) on a worksheet that I want to be able to clear the contents of through a macro - worksheet is entitled Database
I have 3 additional worksheets all of which have summary information on and some of the formulas are huge.
I've inserted a module and produced this code;
Sub ClearContents()
Application.Calculation = xlCalculationManual
Range("C2, C5, C8:N1007, P8:P1007, ....").ClearContents
Application.Calculation = xlCalculationAutomatic
End Sub
Because of all the 3 summary page formulas the code is taking a few seconds to run.
I'm new to VBA and just wondered whether I could switch the calculation setting for the entire workbook onto manual at the beginning of the code and then switch it back to automatic at the end of the code? Think this might speed things up.
View 5 Replies
View Related
Apr 3, 2013
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
View 2 Replies
View Related
Apr 26, 2013
calculating the percentage of a percentage and writing the formula for excel.
There are 295 people in a room, of the 295, 75 or 25% are mothers. (I know how to calculate 25% - 75/295 = 25.42) of the 75 mothers 35 have 3 children, 32 have 2 children and 10 have 1 child.
35 is what percent of 25%
32 is what percent of 25%
10 is what percent of 25%
View 3 Replies
View Related
Nov 19, 2008
make a calculation(addition) and use the answer to multiply against another addition calculation....
The sum of (Monday!A1:A4) multiplied by the sum of (Monday!B1:B4) plus (Tuesday!A1:A4) multiplied by the sum of (Tuesday!B1:B4) and so on.
View 2 Replies
View Related
Nov 20, 2012
For the below macro.
ABCDG
CodeTotalBaseNetA1 = 20%
A110083.3316.67A2 = 10%
A2350318.1831.82A3 = 7%
A3220205.6114.39A0 = 20%
A015015030
A1 is the code, take the total(B) and calculate the base(C) on the percentage given in the G, net = B-C. for A2 and A3 it is the same process.
For A0 the total (B) is equal to Base(C) and calculate the net on the given percentage in G.
View 1 Replies
View Related
May 26, 2014
How can I toggle between percentage and actual value to display on a pie chart?
View 1 Replies
View Related
Apr 8, 2014
I have a whole number (207) in B5. This should be seen as a percentage (207%).
I want to add this percentage to the value in M15, which is not a percent (2705.8).
I would like to display this sum in M17.
The number that is displaying now, after simply putting 207% (I don't want the % symbol in there) in B5, and the formula =sum(M17,B5) in M17 is 270787%.
This is obviously not correct.
View 3 Replies
View Related
May 5, 2014
Why is Excel not rounding up a percentage of 93.5 to 94?
View 6 Replies
View Related
Jun 21, 2014
I have a simple issue i cannot figure out how to write a formula for.
In A2 i have the number of operations.
In A4 i have the percentage of CPU usage it requires to complete those operations.
I need an output somewhere that will tell me how may operations I can get per 0.1% of CPU usage.
View 5 Replies
View Related
Dec 16, 2013
The cell I am referencing value is 100,000
I need to take two percentages off of that number. First 50%, then 37% and have the value in a SINGLE cell.
Because 100,000/1.87 is not the same thing....of course.
View 11 Replies
View Related
