I have a range of cells that I want to use as column headings. Say the range is A1:A100. I need them to be able to be transposed across the first row of the sheet. Now I know that I can use the transpose function in a cell but this array is embedded in a macro.
View 3 RepliesI have a list of values in a column that I want to enter into an array. The values are linked from a database and as such the number of values that are in the column can change. At the moment I am populating the array using the code below. I have made the array much larger than it needs to be to accommodate for the possiblity of more data being entered into the database and my loop also accounts for this by adding extra values into the array. Just wondering if there was a more efficient way to
a) Dimension the array
and
b) Populate the array so that only the data I need is entered into the array
Dim ClassArray(40) As String
'Save Classes as an array
For j = 0 To 39
ClassArray(j) = SourceWB. Sheets("HMI Class"). Cells(j - 2, 1).Value
I'm trying to populate a worksheet using arrays.
View 14 Replies View RelatedI am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
I need to summarize some information from a different worksheet. Worksheet A(WS-A) is the summary and worksheet B (WS-B) is the source of information. On WS-B I have a range of values under the title "Materials" which I use to put together an estimate. This range has about 25 rows and not all of them are populated depending on the needs of the particular job.
If it matters, the Materials cells are populated by a drop down "list" from yet another worksheet. On the summary (WS-A) I want to show only the cells from WS-B that have a value in them so that if, within the Materials worksheet, there are only 6 rows that have data in them...only those 6 rows are shown on the summary worksheet.
I want to run a macro when a cell is changed and populate Cell A12 With
the value in a named range.
The Name of that range is in cell A3
so i assumed i could do the following:
I have a sheet containing 2 lists of categories for income and expenses. These lists are named inc and exp, respectively, and are contained in a sheet called "Lists." They are dynamic ranges, meaning every time a value is added, the named range adjusts itself to include the new value(s). [=OFFSET(Lists!$A$1,0,0,COUNTA(Lists!$A:$A),1)]
I have 2 tables summarizing 12 months of data. The tables use sumif to find all occurrences of each category and sum them. There's 1 table for income, 1 for expenses. Each is a 2 column table, with all the categories for income in column A and their total for 12 months in column B. Same for Expenses in D & E.
To populate the categories in column A & D, I am currently using the simple =Lists!A1 =Lists!A2 (inc range), =Lists!B1 =Lists!B2 (exp range) and so on... the problem is when a value is added to either list, while the named range adjusts, I have to manually drag the formulas in Column A & B down 1 more cell to include the new value.
How can I use VBA to look for the inc and exp ranges (which will change in size), then populate each table with the most recent categories?
I have a combobox on a spreadsheet it is populated on a sheet called teams :
The Format control has an input range of: Teams!$B:$B
Now this has a few thousand empty cells in the range but I would need it to only populate with the cells that are not empty.
I have a column of values (E4:E87). I'm adding 1 value to this column manually each day...so tomorrow (July 24th) I will have E4:E88...and so forth. Each day is a new row.
In column Z (i.e. cell Z87) I have the formula =(SUM(O53:O87))/(SUM(E53:E87)). Z88 will have
=(SUM(somevalue:O88))/(SUM(somevalue:E88)). This gives me a resulting percentage for a rolling period of time.
I need an automated way to populate "O53" and "E53" ("somevalue") in the formula so that the SUM of the current row's cell (i.e. E88) through [whatever] is 50 or greater. (The sum of the values should be as small as possible, but at least 50, and should not include any older values than absolutely necessary for it to equal at least 50.)
An image of my spreadsheet can be viewed here: [URL]
Is it possible to be able to select a range of dates, and a time interval, and then to automatically fill in cells in a column? to be more specific, I want to be able to select, say 1 Jan 2013 to 31 dec 2013 in one box, then specify a time interval, for example "hourly" and then a column is populated with each interval, i.e. 1 jan 2013 00:00, and then the next one is 1 jan 2013 01:00 etc. I have tired the normal automatic fill tool but it never seems to get it right. It works for the first few days then it all goes funny.
View 3 Replies View RelatedI need to populated a specific range of cells based on a value of any kind in a header cell. Attached is a sample of the end results. Please remember each header cells needs to determine what happens the range of cells below the header cells.
View 3 Replies View RelatedUsing VBA, I am importing data from Access (Access2007) into Excel. The code that I use works as required but I need to refine it so that I can filter for the records that I need to import. I can import ALL records. I can import selected records by manually changing my SQL query. I would like to reference an array of values or a range of cells so that I do not need to manually change my query every time I want to run it.
[Code].....
This code gets all records for "Jeff" and "Bob" from the Access database. I need to query about 100 names at a time so manually inputting them is going to take forever. How I can make it work?
By using an array:
[Code].......
or
by using a range of cells:
formula to take data from a column entry to a row style? I've attached a sample spreadsheet.
View 9 Replies View RelatedI have read in 2 blocks of data as 2D arrays, and wish to create a third 2D array from some of the elements of the first two. When I do this I get an output range that is the correct size, however each row of data in the range is identical. This is what I am using:
[Code] .....
So my main concern is how to get each row of data being printed to Sheet2 to be the correct rows, and not just one row repeated thousands of times.
I've got a list box which I want to fill with a two column array, with items from a sheet based on a criteria selected by userform fired from another sheet.
Private Sub VariationsApprovedListMake()
Dim ws As Worksheet
Dim MyList(10, 2) As String
Dim M%, n%
Set ws = Worksheets("Variations")
LastRow = ws.Cells(Rows.Count, 1).End(xlUp).Offset(0, 0).Row
'Clear ListBox
lbVariationsApproved.Clear
'>
With lbVariationsApproved
.ColumnCount = 2
.ColumnWidths = "25;25"
.Width = 200
.Height = 100
End With.....................
I have a set of values stored in an array an I simply want to populate the list box with these. one article on the microsoft website simply gave:
'Assign the array to the listbox
ListBox1.List = LArray
However, I get an object required error.
I'm trying to find a single conditional formula which summarizes multiple text occurrences in a range of cells. I managed to summarize the occurrences in a single cell, but my challenge is that I'm looking for a single (array?) formula for this.
I have a worksheet with column A which contains the condition and column B which contains a text field. I'm looking for a single formula to summarize all the 'AB' occurrences in the cells B4..B11 where the column A is Apple. I managed to do this by using an additional column (column C), however as my worksheet contains over 10000 rows, I would like to use a single conditional (array?) formula summarize the AB occurrences (multiple ' AB's can occur in a single cell) in stead of having to use an additional field per row.
I have attached a sheet as an example. I'm looking for a single array formula in cell C11 which summarizes the 'AB' occurrences in cells B4..B11 where column A is Apple.
I have a VBA form and on form initialize I want to populate a combo box… My array to populate it with could be a massive list so I need to set my array before it populates
I have this code so far but I need my array to be from A5 to the last row in sheet 1
I know how to set an exact range but not one that changes.
VB:
Dim myArray As Variant
myArray =
With Me.ComboBox1
.List = myArray
End With
Here is a sample of the data I need to populate in the combobox.
client_ref
A0008
A024
AA005
AA009
[Code] ....
I have a complicated one here (at least for me)...
I have a very simple sample spreadsheet showing exactly how I'd like it to work but couldn't find out where to upload it? I can upload or send to you privately, if need be? May make it much easier to understand the desired end result.
I want to populate as follows:
Column A: "IN TIME"
Column B: "NAME"
Column C: "POSITION"
I have a date in cell D1 - today().
I need to search for that date in a column between range AA2 and BN2. When it finds the date (let's say it finds a MATCHing date in AA2), it will then search that entire column cells AA30:AA1920 and look for "server". When it finds "server" it will then grab the in time which will always be 4 cells directly above where it found the position ("server"), and then the name of the person, which will always be in column X, 6 cells above the position.
There will be multiple instances of "server", and I want to populate the columns A, B, C with all the servers it finds first for that day with their name, in time and position. then a blank row.
Then, I want it to find "Bar" positions using the same formula and method, and populate that right below the server data, then find "line", etc.
Ultimately, I'm trying to make a daily staffing plan, where all the people that are working on that date, it will show their in time, name, and position in columns, A, B, C as far down as necessary.
However, I'd like them auto grouped together by position, so I'd like the formula to somehow populate all the servers first, then all the bartenders, then hosts, then line, etc.
i've come across something that i'd like to do with regards to populating an array/variant not using a global variable.
i currenty have this for testing purposes which works, but perhaps not the best solution?
Private vntArrayCodes() As Variant
Sub populateVntArrayCodes(ByVal intArrayCount As Integer, _
ByVal strCode As String)
Redim Preserve vntArrayCodes(intArrayCount)
vntArrayCodes(intArrayCount) = strCode
End Sub
Is there another way to do this without using a OO Classes?
I am trying to take selected items from a listbox and put the selected items into an array. Basically I am trying to put the selected items into a variable that I can pass to other modules. I am close but something is off. I can't tell if it's the variable declaration or the code.
I get Run Time error 91. Object variable or with block variable not set
Here's what I have so far...
[Code] ......
Trying to load an array from user selected items in a listbox
My code returns Type Mismatch error
I don't know why as a I did not declare type for the array I thought treated as variant so should accept any values?
Debug:
arrSelected(intI) = .Selected(intI)
Private Sub btnOK_Click()
Dim arrSelected
Dim intI As Integer
With Me.lstAccounts
For intI = 0 To .ListCount - 1
If .Selected(intI) Then
arrSelected(intI) = .Selected(intI)
End If
Next intI
End With
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
View 14 Replies View RelatedI understand how to create an array within a routine:
CurOptions = Array("M1", "M3", "M3 DSR", "L1", "L2", "CSA")
But I need the array to be public as the array can hold one of 6 different sets of values so I will declare the array to be only used within the module as:
Dim CurOptions(30)
Later I need to fill in the values manually, they will not be copied in, they need to be provided in a list.
It should be just one line.
I want to know how to copy a range into an array then an array back into an range.
Code:
Dim a(3,3) As Double
a(3,3) = Range("C3:E5")
Range("C10:E12") = a(3,3)
I am trying to automate a process where a series of numbers would get populated according the range values. Also I am trying to get the automation to pick up the next range when finished with first one and continue with the task.
Here's what I have as start info and where I want to get to.
Sheet1
A
B
1
Ranges
[Code] ......
Excel 2003
My sheet goes from monday to friday on the coulombs. On the rows i have various data sections for each day. I would like the data on the last day (any day after monday) that there is data for a sheet to input that data into the monday slot when the "master date" is changed on the cheese sheet. The idea here being that the script will take the last entered data for a given sheet, and put it into the monday coulomb on the same sheet when the date is changed. This is kind of hard to explain so if you need clarification let me know. Attached is the sheet i'm working with.
View 14 Replies View RelatedIs it possible to populate a multicolumn listbox while excluding the hidden rows?
View 3 Replies View RelatedI have a userform (uf_PaxInput) with a Combobox (cmb_flight_dest) which I am trying to populate from a worksheet range ("Dest") using the following code:
VB:
Sub LoadForm()
With uf_PaxInput.cmb_flight_dest
For Each Item In Range("Dest")
.AddItem
Next Item
End With
uf_PaxInput.Show
End Sub
The code seems to run okay however whent the form loads the combobox drops down to show only blank items to select. These blank items number them same number of items that are in my named range ("Dest").