I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
I need to populated a specific range of cells based on a value of any kind in a header cell. Attached is a sample of the end results. Please remember each header cells needs to determine what happens the range of cells below the header cells.
View 3 Replies View RelatedHere is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
View 14 Replies View Related I am looking for a VBA that could populate from column (A2:A5) to cells (B2:F5) as in the attached spreadsheet, based on the frequency, in a five year time-frame.
screen_print.JPG
[Code] .....
Is it possible to be able to select a range of dates, and a time interval, and then to automatically fill in cells in a column? to be more specific, I want to be able to select, say 1 Jan 2013 to 31 dec 2013 in one box, then specify a time interval, for example "hourly" and then a column is populated with each interval, i.e. 1 jan 2013 00:00, and then the next one is 1 jan 2013 01:00 etc. I have tired the normal automatic fill tool but it never seems to get it right. It works for the first few days then it all goes funny.
View 3 Replies View RelatedI am trying to copy a row based on the value of a cell.
I have two sheets in my workbook and on sheet 1, I have a part number and a description. On sheet 2, I have part numbers again, but this time I the description is broken up into the format I need.
What I am trying to do is have excel search on sheet 2 for the part numbers, then copy the information that corresponds to the part number into the correct column.
I have tried using Vlookup. But if the part number in row 2 on sheet 1 match the one in row 8 on sheet 2, this will copy over the data from row 2 whereas I need row 8.
If this would be more doable using VBA, that is fine by me. I haven't been able to figure out anything in VBA or in excel formulas up to this point.
I run this macro that populates 7 cells based on data in another sheet. It seems that every sheet that have formulas that point to this sheet are being stuck in in the screen updating somehow?
Basically when I press F9 to calculate or change any cell that makes the sheet calculate it has like a screen burn in of all the sheets that are being calculated. I have been able to use this as a workaround:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
Application.ScreenUpdating = True
End Sub
But I shouldn't have to do this and it slows it down as it runs through this specific code about 11 times for each sheet that is re-calculating. Something is getting stuck in memory or something that seems to be causing this issue. This is the code I am using and I am not selecting any cells or sheets, but it appears that when I walk through the code that an image of the sheet comes up on the screen? The code in red seems to be what is causing the issues, but I do not know why? I can pass the 2 workbooks along to someone so they can see the behavior if they would like? Just let me know.
Sub populateEmployeeData()
Dim srcWorkbook As Workbook
Dim foundEmployee As Range
Dim srcWorkbookName As String
srcWorkbookName = "XIP_Employee_Data_" & Left(ActiveSheet.Range("B9").Value, 31) & "_" & Format(ActiveSheet.Range("B10").Value, "MMMDDYYYY") & ".xlsx"
If IsWorkBookOpen(srcWorkbookName) Then..........................
What formula do I use to populate certain cells (E5:E10 and J5:10) based on match with condition (E3) with cells from and in the ranges C2:C73 and D2:D73 without creating milelong IF formulas? I am almost at the goal... past 10pm here in Thailand and still at the office
View 2 Replies View RelatedI've got 3 pairs of columns and I need to sort through them and align the cells in columns E&F with those in A&B and C&D. The cells I need to match up are the times (columns A, C and E)
Example - convert this:
A...............................B..........C...............................D.........E...............................F......
BID TIME.....................BID.......ASK TIME....................ASK......TRADE TIME................TRADE
30/07/2014 14:21:04.....6.10.....30/07/2014 14:22:37.....6.13.....30/07/2014 14:21:04.....6.13
30/07/2014 14:21:06.....6.11.....30/07/2014 14:22:54.....6.13.....30/07/2014 14:22:37.....6.13
30/07/2014 14:22:37.....6.11.....30/07/2014 14:22:56.....6.13.....30/07/2014 14:22:54.....6.13
30/07/2014 14:22:54.....6.11.....30/07/2014 14:22:56.....6.14.....30/07/2014 14:22:56.....6.13
30/07/2014 14:22:56.....6.11.....30/07/2014 14:22:59.....6.13.....30/07/2014 14:22:59.....6.13
Into this:
BID TIME.....................BID.......ASK TIME....................ASK......TRADE TIME................TRADE
30/07/2014 14:21:04.....6.10.................................................30/07/2014 14:21:04.....6.13
30/07/2014 14:21:06.....6.11........................................................................................
30/07/2014 14:22:37.....6.11.....30/07/2014 14:22:37.....6.13.....30/07/2014 14:22:37.....6.13
30/07/2014 14:22:54.....6.11.....30/07/2014 14:22:54.....6.13.....30/07/2014 14:22:54.....6.13
30/07/2014 14:22:56.....6.11.....30/07/2014 14:22:56.....6.13.....30/07/2014 14:22:56.....6.13
............................................30/07/2014 14:22:56.....6.14............................................
............................................30/07/2014 14:22:59.....6.13.....30/07/2014 14:22:59.....6.13
I don't know VBA so hopefully there's a way of doing this with a basic Excel function.
I am working on a spreadsheet for a shoe company. I have separate columns for the size, model, color, and item number of a shoe. I get everything except for the item number from a written document; I then have to find the item number for the shoe from another excell document called the Master List.
I was hoping there would be a way to have Excell auto-fill the item number for me. For example, if a shoe is a Red, Athens (the shoe model),size 12, its item number (which can be a pain to find) listed in the row of the Master List is aaabbb. So I want to just enter in the size, color and model number, and have Excell find the item number for me, and fill it in.
I have enclosed an example. Sheet 1 is the sheet I would be working on. Sheet 2 is a portion of the Item master list, which is actually 50k lines.
The sheet I have attached has three tabs one is a master sheet another is the production input and the last is an engineering input section, I have coded the production input section to input into cells and email the engineers when they have a new job, the issue i have is with the engineering input.
The engineers can currently go into this sheet and input the job number onto the engineering input section and it will show them the current issue from the master sheet (I have already entered 1002 in it), what I want them to be able to do is input into the white sections below the description and when they click on update entry a macro takes the job number entered into B3 and saves the information onto the mastersheet in the correct column/row which corresponds to the job they are updating.
However the engineers may need to go into the same job several times and update different information therefore the fields need to not paste into the cells if the input sections are blank.
Masterfile.xlsm
How do you select specific coloured cells from a range of data in one go, without having to scroll through the worksheet and pick them out individually?
Is it possible for the tab name to auto populate from a specific cells contents?
View 9 Replies View RelatedLet me start by stating that I am a novice at writing macro script. I am trying to write a script that will open and search a Word doc, find specific text in that document, and populate certain excel cells with that information.
Ex. of Word doc:
5.1.2.3 Install gasket [12], using bolt [5] and nut [8].
5.1.2.4 Uninstall gasket [12] and scrap gasket and fasteners.
I would like the script to search for and populate any number between the [ ] into a specific excel cell, also I would like it to identify and populate an excell cell with the associated step, e.g.: "5.1.2.3", which will be at the begining of that step (step could be several sentences long). Also, I would like the script to look for and identify/populate an excel cell with any number of words such as: "install", "uninstall", "break", "scrap", or "remove" also associated with that step.
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?
My sheet goes from monday to friday on the coulombs. On the rows i have various data sections for each day. I would like the data on the last day (any day after monday) that there is data for a sheet to input that data into the monday slot when the "master date" is changed on the cheese sheet. The idea here being that the script will take the last entered data for a given sheet, and put it into the monday coulomb on the same sheet when the date is changed. This is kind of hard to explain so if you need clarification let me know. Attached is the sheet i'm working with.
View 14 Replies View RelatedI am attempting to make a range of cells' data be deleted if a cell outside of that range that had a name in it is no longer there. So if I have a list of names in cells A1:A6 and a range of data in cells D10:E20 that corresponds to a name in cell A2. If the name in A2 is deleted I would want the data in D10:E20 to be deleted.
View 9 Replies View RelatedI have a couple of spreadsheets that has several columns each containing several hundred thousand rows of codes. To quickly analyze this data, I am trying to come up with a conditional formatting formula to highlight the respective cells when specific values occur next to each other. A particular code will show up in many cells, but the code that is the respective adjacent cell is always different. I need to know when row A contains, for example, '9928559' and row B contains '36415RT'.
View 3 Replies View RelatedI have two columns with the same data just totally different orders the third column (associated with the second) has data that I want to sort. I want to keep the order of the first, rearange the second so they match, and have the 3rd column follow the second to the proper location. i need to keep the order of column 1 so i can post into a massive spreadsheet. Theres gotta be a quick formula for this i just have no clue
View 2 Replies View RelatedI have a table in excel with some data to create labels, but these labels must be repeated according to the number of volumes. Example: I have a delivery for X and such delivery has 5 volumes, need to create 5 labels just changing the volume number: 1/5, 2/5, 3/5, 4/5 5/5.
I would enter a value in "D1" after running the code, in column "A" shall be filled as follows.
D1 = 7
A2 = 1/7
A2 = 2/7
A2 = 3/7
A2 = 4/7
A2 = 5/7
A2 = 6/7
A2 = 7/7
If "D1" equals 3 then
A2 = 1/3
A2 = 2/3
A2 = 3/3
I have a range of cells that I want to use as column headings. Say the range is A1:A100. I need them to be able to be transposed across the first row of the sheet. Now I know that I can use the transpose function in a cell but this array is embedded in a macro.
View 3 Replies View RelatedI have a workbook that's setup like a form, with 30+ worksheets in it (lets say this file is called "source.xlsx"). I have information in specific cells I want pulled out in each worksheet and brought in to a new workbook called "Destination.xlsx" and listed in a row.
View 2 Replies View RelatedThe file is attached here. I would like to be able to autopopulate cells based on a dropdown. The first tab has the final report and the other 2 tabs are the raw files.
KMPH_Inventory.xlsx
Im trying count cells based on the cells color. My sheet has multiple blocks filled with different colors. I have searched all of the regular sites out there for vb code related functions, but I can find one that will let me select a range of colors and a range of cells to be counted.
View 2 Replies View RelatedI need to summarize some information from a different worksheet. Worksheet A(WS-A) is the summary and worksheet B (WS-B) is the source of information. On WS-B I have a range of values under the title "Materials" which I use to put together an estimate. This range has about 25 rows and not all of them are populated depending on the needs of the particular job.
If it matters, the Materials cells are populated by a drop down "list" from yet another worksheet. On the summary (WS-A) I want to show only the cells from WS-B that have a value in them so that if, within the Materials worksheet, there are only 6 rows that have data in them...only those 6 rows are shown on the summary worksheet.
I want to run a macro when a cell is changed and populate Cell A12 With
the value in a named range.
The Name of that range is in cell A3
so i assumed i could do the following:
I have a sheet containing 2 lists of categories for income and expenses. These lists are named inc and exp, respectively, and are contained in a sheet called "Lists." They are dynamic ranges, meaning every time a value is added, the named range adjusts itself to include the new value(s). [=OFFSET(Lists!$A$1,0,0,COUNTA(Lists!$A:$A),1)]
I have 2 tables summarizing 12 months of data. The tables use sumif to find all occurrences of each category and sum them. There's 1 table for income, 1 for expenses. Each is a 2 column table, with all the categories for income in column A and their total for 12 months in column B. Same for Expenses in D & E.
To populate the categories in column A & D, I am currently using the simple =Lists!A1 =Lists!A2 (inc range), =Lists!B1 =Lists!B2 (exp range) and so on... the problem is when a value is added to either list, while the named range adjusts, I have to manually drag the formulas in Column A & B down 1 more cell to include the new value.
How can I use VBA to look for the inc and exp ranges (which will change in size), then populate each table with the most recent categories?
I have a combobox on a spreadsheet it is populated on a sheet called teams :
The Format control has an input range of: Teams!$B:$B
Now this has a few thousand empty cells in the range but I would need it to only populate with the cells that are not empty.
I've been racking my puny brain for an hour trying to figure this out. Basically, my problem is with the last 2 invoices listed. If one invoice has "PO CLOSED" on it, I want all other invoices on that same PO to say the same thing. Surely I can do this with a formula or conditional formatting, but I cannot think of how.
PO #Invoice #DateInvoice TotalDept.ActivityElementPO AmountPO Amount RemainingPO Status0707955289651/12/09$812.9075105854035$2,960.28$59.380707955459806/15/09$667.2475105854035$2,960.28$59.380707956486827/7/09$812.9075105854035$2,960.28$59.380707955584669/29/09$607.8675105854035$2,960.28$59.380719750913336/18/09$947.7975105853305$5,000.00$3,117.210719750915917/17/09$935.0075105853305$5,000.00$3,117.21PO CLOSED