Populate Cells Based On Date And Time Range Selection?
Mar 10, 2014
Is it possible to be able to select a range of dates, and a time interval, and then to automatically fill in cells in a column? to be more specific, I want to be able to select, say 1 Jan 2013 to 31 dec 2013 in one box, then specify a time interval, for example "hourly" and then a column is populated with each interval, i.e. 1 jan 2013 00:00, and then the next one is 1 jan 2013 01:00 etc. I have tired the normal automatic fill tool but it never seems to get it right. It works for the first few days then it all goes funny.
View 3 Replies
ADVERTISEMENT
May 12, 2014
I've attached an example workbook.
Trip Plan example.xlsx
I'm trying to work out how to have cells R11 - Rxx generate the correct date, based on the rest of the calculations.
Please note that the attached is a crude cut down version of the larger spreadsheet, for the purpose of highlighting my problem.
SO, if E7 is changed, subsequently the values in K11:Rxx will be respectively updated.
D12 and G12 are entered manually. (although I'll probably make these drop downs or date choosers at some point...)
Depending on the value in E7 and time in D12, the required break period is listed in K11: Kxx.
The time that these periods of rest are required to occur before is then calculated and listed in O11:Oxx.
I need R11:Rxx to calculated the appropriate date from these calculations, relative to the date in G12.
For example, the rest required in K11, is required on the same day, as such it need to populate with the value in G12.
However the rest required in K13:Kxx, is required by a time (O13:Oxx) on the following day - G12+1
In some case, this time variance could run over 2 or more days.
I figure it's got something to do with the value in D12 also including the date of 0/1/1900.
I'm happy to add hidden cells for formulas/results to work around it, as the end product will print as an A4 document, where many cells will be locked.
Would prefer not go with any VBA unless it's my only option as I haven't done any VBA stuff as yet.
NB (the value in P5 is static only in this example)
View 11 Replies
View Related
May 23, 2014
I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
View 2 Replies
View Related
Dec 6, 2006
I have a large dataset where the first column is date and time i.e. "20/01/2005 03:41:06" and I want to delete certain rows based on the times. I have already tried playing about with macro's but failed fairly spectacularly so far. I have code from someone else to delete cells if the value equals a certain time but this doesn't work as the cell contains the date too.
I have already recorded one macro to reformat the data to as the software return 10 timestamped samples per hour and I want 8 i.e. every three hours so there is constant separation for statistical purposes. Both the macros are shown below so you can see what I have.
Ideally I would like to replace the line - If (r.Cells(n, 1) = TimeValue("22:41:06")) ............ - with one that reads - If (r.Cells(n, 1) CONTAINS TimeValue........ - but I don't know if that is possible? If not is there a way to separate the time from the date into 2 columns and then I can delete rows based on the time column using the code below? .......
View 9 Replies
View Related
Feb 7, 2009
I have a dashboard that uses three pivots based off of a single data source. Each of the pivots is designed to work off of their own drop down list.
the first drop down list allows the user to select a lease date. The associated pivot will update with all servers assocated with that lease date.
the second drop down list allows the user to select a server. This list is limited by the lease date selected in the first drop down. The associated pivot will update with the partition information for the server selected in the drop down.
the third drop down list allows the user to select a partition. This list is limited by the server selected in the second drop down. The associated pivot will update with the detailed partition data for the partition selected in the drop down.
All of the above works, the issue is that when a new lease date is selected in the first drop down list, the current entries for the second and third drop down list are still reflecting the old lease date information. When you click the drop down the correct data is there, it is just not automatically populated.
Is there a way that when the user selects a new lease date in drop down one, the first server in the new list is automatically populated in the second drop down as well as the first partition in the third drop down?
View 7 Replies
View Related
Dec 18, 2007
if is possible to make some kind of ComboBox without filters, I mean that let you choose different items at the same time. I do not know if some of you have seen some "ComboBox" that has all the options in one side and next to this window it has a blank window that when you double click the word that was in the other wondow passes to the other window telling you that you have chossen this item.
View 6 Replies
View Related
Sep 22, 2009
I need to populated a specific range of cells based on a value of any kind in a header cell. Attached is a sample of the end results. Please remember each header cells needs to determine what happens the range of cells below the header cells.
View 3 Replies
View Related
Apr 7, 2014
I need to populate a textbox based off 2 combobox selections. My first combobox selects the worksheet. "08BOG, 09BOG, 10BOG...15BOG" My second combobox lists majors based off of the worksheet selected in combobox 1. I need my textbox to populate the value 18 rows over the selected worksheet and the selected row.
Currently I have something like this:
[Code] ......
But obviously this is all wrong because it is only referencing one sheet instead of the selected sheet in the combobox.
View 1 Replies
View Related
Jun 26, 2014
My table contains 26 columns, I have Column E header as 'Assignee' and Column J for 'Date_Closed'.
I have a form containing a combobox and a listbox. The combobox is populated with 10 Assignee Names.
I want the listbox to be populated with all rows containing the selected Name ONLY if Date_Closed column (J) is blank/null.ie.date not filled yet.
For example, if i select "Ann", the listbox will show all rows in the table that have Assignee Ann for and closed date is still blank.
View 1 Replies
View Related
Jan 25, 2008
My table contains 6 columns, one of which is 'season'.
I have a form containing a combobox and a listbox. The combobox has 4 options (spring summer autumn and winter). I want the listbox to be populated with all rows containing the selected season. For example, if i select "spring", the listbox will show all rows in the table that have spring in the season column.
I realise this is a very remedial question but i am very new to VBA and programming in general!
View 6 Replies
View Related
Jan 25, 2008
I found many examples on this forum of how one can pull in data from closed workbooks, or copy it and have it stored in the active sheet. So far so good, but I need a solution which would do the opposite - I need the macro to take a range of data form the active sheet store it in a closed workbook and save any changes in the target workbook without opening it.
View 2 Replies
View Related
Jan 20, 2013
I have a dropdown list selection on the form for types of machines. The list of machines, their sizes and related noise level are in a chart on worksheet 2 and I'd like to automate the form so that when the machine is selected, the related noise level auto populates.
The dropdown box has been put in the form using the data validation function.
View 7 Replies
View Related
Dec 31, 2009
I want to populate the values of two textboxes that we will call TextBox5 and TextBox6 from columns W and X of a spreadsheet called "PowerAnalysis" when a selection is made form ComboBox5.
The ComboBox5 works perfectly now. I just need it to populate the other two text boxes.
All the data resides in the same row on the same sheet of PowerAnalysis when the selection is made in ComboBox5.
I hope I have been able to give a clear picture of what I am wanting to do.
View 9 Replies
View Related
Mar 23, 2014
First sheet has a client name and several cells of data along the same line. All of the data on this sheet is kept long term.
The second sheet is completed copied and deleted. In completing the second sheet the client name is selected of a drop down list and pulled from sheet one.
What I want to do and not sure if there is a way is that when I select a client and populate it on sheet two I would like the related data on that clients line from sheet one to populate to same named lines on sheet two.
if this is possible and if so provide a brief description of how it would work
View 3 Replies
View Related
May 2, 2014
For example, I have a master sheet that has a drop-down list of the months January and February, which have their own sheets. I am trying to populate the sales of the week 1, 2 ,3 ,4 in the master sheet based on the same data for the month chosen.
View 2 Replies
View Related
Mar 7, 2013
[URL]....When I select a name in column B, it populates column C's dropdown with that name's list of units. When I select a unity type in column C, I'd like it to automatically populate column E in the same row with the value associated with that unit. The values associated with a particular unit can be found to the right of the sheet. So if in row 2 I select Blake in column B, then Unit 5 in column C, I'd like column E to be populated with 14.
Edit: using Excel 2007.
I attached stripped down version of the sheet which is small enough to post. None of the things I removed should affect the topic at hand. The full sheet is available at rapidshare.
View 6 Replies
View Related
Jan 27, 2012
I have a question on how I could populate data using a combo box selection in Excel 2010.
For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.
Maybe to make it clearer...
Table 1
Name | Address | Phone number
Andy | Avenue 2 | 999
John | Road 5 | 998
Combo box (selection of names): John
Data derived from combo box - Table 2
Name | Address | Phone number
John | Road 5 | 998
how I could solve this Also, do let me know if this can be done without the use of VBA.
View 4 Replies
View Related
Jan 22, 2008
I need to populate a worksheet's rows with values from 2 comboboxes and a listbox which can have multiply selected items. After finding the row's last free cell, I have the listbox values properly populating correct column. However, I not sure how to get the corresponding combobox values assigned to the appropriate columns.
View 2 Replies
View Related
Jun 5, 2013
I have a scheduling tool that I need to do the following with -
Allow user to select a range of cellsUser types a value (non formulaic just plain text)Value gets populated to all selected cells
The reason I'm not just using fill handles is because of the amount of formatting in the cells.
View 6 Replies
View Related
May 25, 2014
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies
View Related
Nov 29, 2012
what type of vba code I could use to populate a static date and time that I could plug into a formula. Basically what I need is:
IF A1<>"" then L1 shows the date and time of the entry. If A1="" then L1 remains blank. I don't want the date to change once it has been entered.
View 7 Replies
View Related
May 26, 2014
i am trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 4 Replies
View Related
Jan 21, 2010
I have a Workbook with about 20 Worksheets, for each sheet I have a Selection Change Event that simply performs the Following:
MainSheet1. Range(“Z1”) = Now
1 Cell on every Sheet then is pointed to this cell via =Main!Z1. Problem is that when this is preformed Each Row from the Other In-Active Sheets and sometimes a near-by Button will Appear on my Active Sheet. I cannot select the parts of the sheets that appear and when I scroll down till they are out of view and then scroll back up they are gone until I select another cell and it happens again. I have tried in the Z1 cell to just put =NOW() and Make Calculations Manual and then with the selection change to call MainSheet1.Calculate or Workbook.Calculate but this has the very same effect and the other sheets bleed onto or ghost onto my Active Sheet. So far the only way I’ve been able to get around this is:
If Application. ScreenUpdating Then
Application.ScreenUpdating = False
MainSheet1.Range(“Z1”) = Now
Application.ScreenUpdating = True
Else
MainSheet1.Range(“Z1”) = Now
End If...............
View 7 Replies
View Related
Jun 7, 2012
I think there's a way to use Excel to automatically create a 5-day calendar. Maybe a macro?
The date format must be dd/mm/yyyy hh:mm and it must be in text format. If its June 9, 2012 at 6pm - the correct format is: 12/06/2012 18:00
I want to post 5 times a day: 09:05, 9:55, 10:45, 16:55 and 18:00.
Column A is where the date and time goes. Ideally, I'd enter in A1 the start date and then run a macro that would automatically populate the next 5 consecutive days with the specific times above (so 25 rows total in column A).
I have to save the file as a csv file, so the date and time format has to be in text or I'll get an upload error in Hootsuite.
View 1 Replies
View Related
Sep 18, 2013
I am trying to get excel to auto populate the current date and time each time I make an entry, however, each time i make an additional entry the current date and time populates but it changes all the prior entry's with that current date and time.I am trying to keep a log of all the times I make a new entry. Correct formula that will work?
View 9 Replies
View Related
Jun 2, 2007
i have this excel sheet that am using as a monitoring device to track the login and log out patterns of a group of 20 agents. i am able to monitor their current state by using an external link to the local intranet and vlookup.
the status of agent can be either Logged In or Logged Out which populates in E6 to E25.
the cells f6 to f25 again running vlookup shows the last login time of the agent.
what i'm looking for is this:
every time the agent status changes from Logged In to Logged Out or visaversa, the corresponding blank cell in the row needs to populate the the time by value.
View 9 Replies
View Related
Aug 29, 2007
I have code that opens a workbook then selects a range on a specific sheet. All the code works fine (the workbook opens, then the sheet is selected) up until it gets to:
Range("BM9").Select
Then I get a run time error 1004
I tried Cells(9,65) it does the same thing,
View 9 Replies
View Related
Sep 6, 2013
I have a date in a cell that when it is less than today() (so yesterday's date) would turn red and the 5 cells to its immediate right would also turn red, if the date is still current then it would be green and so would the right hand cells.
View 4 Replies
View Related
May 14, 2012
I have one excel sheet. In the first column there are various Project Codes and in the first row there are various date. Cells in the matrix contains 0 or 1 value. If value is equals to 1 that means the project was on hold during this months and if the cell value is null of 0 (Zero) it means the project was active. For a project in a particular row there are several times a project went on hold and now I want a date range showing the project's hold duration. If project went on hold more than one time the result should also give different range for each time when project went on hold.
follow the link to view the excel file.
http://www.excelforum.com/attachment...3&d=1336994800
[IMG]http://www.mrexcel.com/forum/data:image/png;base64,
iVBORw0KGgoAAAANSUhEUgAABAAAAAMACAIAAAA12IJaAAAgAElEQVR4nOy9e3gT153/P99fd7vd77fxV+3udtO06fr3PL
[code].....
View 8 Replies
View Related
Jul 16, 2013
I would like to filter between a date range. the dates i need to filter between are in cells A1 and A2. this range contains the start and end of month. It is referenced from another sheet in the same workbook (='Job List'!C2).
i want to filter; greater than or equal to A1 and less than or equal to A2. How I can do it using the advanced filter method. My data range is C2:C9.
View 3 Replies
View Related
