What I'd like to do is fill specific cells with specific information drawn from other pages based on a combo box selection.
For example, if I were to pick 10131 in the combo box, I'd like it to fill out cells X, Y and Z with information from the three cells to the right of 10131. Assume X, Y and Z are not touching.
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
I am currently trying to make a digital time card for my place of employment. I has an odd set up and odd date ranges. The pay period starts on the 21st of each month and ends on the 20th of the next month.
The time cards have 5 columns for each week starting on Mondays going to Sunday (also weird its not Saturday to Sunday) What I was hoping to accomplish was being able to select the starting month of your choice for pay period and have multiple cells update the week date range.
Date
Date
Date
Date
Date
**Here would be the drop down month select.
Sept 21 - Sept 22
Sept 23 - Sept 29
Sept 30 - Oct 6
Oct 7 - Oct 13
Oct 14 -Oct 20
I have a problem involving two combo boxes in a user form.
I need to populate different “lists” to combo 2, based on a selection in combo 1.
I browsed through the forum but could not find any solution that made sense to me.
Here are the specifics:
Combo 1 (called Cbo_Act) is populated with a list based on a named range in one of the sheets. The range is named “activity” and holds 2 records (“Income” & “Expense”).
This list is loaded as part of the form initialization.
If the user select “Income”, I need combo 2 (called Cbo_Act_Type) to show a list of various income types (derived from a dynamic named range called “Income_type”) and if the user selects “Expense”, I need the same combo box (Cbo_Act_Type) to show a different list, specifically – a list of various expense types (derived from a dynamic named range called “Expense_type”).
I know that this should be with a Cbo_Act_Change () routine, but for the life of me, I can’t figure out how to do it.
can i use a combo box with a dropbuttonclick to run the macro only when the arrow is selected . The problem I am having is the macro will run on the selection of the arrow which is whatt I want but it also run when I make a selection it the combo box
I want to dynamically list items in combobox placed in excel sheet. I have a list of 10 values in a column in excel sheet. I have placed two comboboxes in the same sheet. Now depending on the first combobox selected value i want to list either all or only few values from the available 10 values.
View 4 Replies View RelatedI need to populate a textbox based off 2 combobox selections. My first combobox selects the worksheet. "08BOG, 09BOG, 10BOG...15BOG" My second combobox lists majors based off of the worksheet selected in combobox 1. I need my textbox to populate the value 18 rows over the selected worksheet and the selected row.
Currently I have something like this:
[Code] ......
But obviously this is all wrong because it is only referencing one sheet instead of the selected sheet in the combobox.
My table contains 26 columns, I have Column E header as 'Assignee' and Column J for 'Date_Closed'.
I have a form containing a combobox and a listbox. The combobox is populated with 10 Assignee Names.
I want the listbox to be populated with all rows containing the selected Name ONLY if Date_Closed column (J) is blank/null.ie.date not filled yet.
For example, if i select "Ann", the listbox will show all rows in the table that have Assignee Ann for and closed date is still blank.
On a sheet named "Matrix" I have rows of data in columns A, B, and C. I have the following code in a ComboBox that will show names from column B of the Matrix sheet.
View 3 Replies View RelatedI have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
View 4 Replies View RelatedI know there are a lot of hide row threads... i've searched for ages... but (unfortunately) i can't a solution that addresses my problem and I'm stuck. Please help!
I have a data between rows 10 and 1310 and I would like to use a combo box option to select and view certain rows of data only. I don't want to use auto filter because i have a separate macro using an auto filter on the same data - they won't play together.
So in short - combo box will contain values from column A. When value is selected from combo box hide all non matching rows based on column A values.
So i have added a combo box to sheet1 and populated it with the following workbook code...
Sub Workbook_Open()
With Sheets("Sheet1").ComboBox1
.AddItem "Select Product Type"
.AddItem "Apples"
.AddItem "Mangoes"
.AddItem "Oranges"
.AddItem "Clothes pegs"........
There is a small command button in cell A11 that brings up the userform. I have a multi-tab user form the userform contains a number of combo boxes with an associated textbox right of each. I would like to populate the textbox based on the value selected in the combo box. For example when Ice Foot is selected (Type of Fast Ice) populate the textbox (txtFastIceEncoded) with the value of 6. These values are located on 'decode' sheet. I then want to take the four values and place them in the textbox 'txt_Tw_Tw_Et_DE_ai_group'. Ultimately I want the values to end up back in the worksheet 'Synoptic Ice Obs'. Perhaps there is a better way to do this than I am trying. I have poured through countless threads in this forum and have tried a number of these. I however always seems to run into some problem that I do not understand fully. I have included a copy of the workbook.
View 4 Replies View RelatedMy table contains 6 columns, one of which is 'season'.
I have a form containing a combobox and a listbox. The combobox has 4 options (spring summer autumn and winter). I want the listbox to be populated with all rows containing the selected season. For example, if i select "spring", the listbox will show all rows in the table that have spring in the season column.
I realise this is a very remedial question but i am very new to VBA and programming in general!
I'm trying to do some userform development with multiple dependent comboboxes, but I am having trouble populating the third and last combobox. First, I populate the 1st combobox on the userform initialization. I can get the first 2 comboboxes to populate correctly, but I can't seem to get the 3rd combobox to populate correctly.
The 3rd combobox takes the selection from the 2nd combobox and searches column "A" in the worksheet "Chassis Specs" and populates the 3rd combobox with data from column "B", there will be repeat items in column "A", but all those occurances should populate the 3rd combobox with the data from "B".
I am attaching my whole workbook.
Chassis Specs Info_Build_REV B.xlsm
I have filled up my ComboBox1 with the sheets I want to add information to. My problem now is how to place the info in the correct sheet when I click CommandButton1.
I've been working on this for a few hours now. I got this to work on the first code I found but it didn't work afterward. I just deleted the whole thing and started again.
open attached file: For example, if I click "show matching lists" button and select from combobox st8 / b1 / b4. I need in cell K2: 3472.9 and in cell L2: 3472.9.
View 2 Replies View RelatedI have a userform that has a "payment type" combo box
This box consists of:
I am creating a Userform and one of the elements on it is a combobox where the user has to select their name. On the same Userform, I want to have a textbox (or listbox or another combo box if necessary) which will show the users default cost centre based on the initial combobox selection. I've tried doing this various ways, but I can't get the textbox to update when the combobox selection changes.
View 7 Replies View RelatedI am trying to create a macro that will allow the user to select choices from combo boxes on a userform. The choice of one combo box determines what will be shown in the next combo box and so on. This will occur a set number of times (depending on what they are looking for), at which point the list of possible choices will be presented.
I populated one combo box in UserForm_Initialize() but then I might have to change the others with Combobox1_Change()...
I am working on a spreadsheet for a client. I am using Excel 2007 and she is using Excel 2000. I have created a emplate for her to enter survey data into. Using the following code, I have created combo boxes for the drop-down menus so the client can tab from one cell to the next while entering data:
Option Explicit
Private Sub TempCombo_KeyDown(ByVal _
KeyCode As MSForms.ReturnInteger, _
ByVal Shift As Integer)
'Hide combo box and move to next cell on Enter and Tab
Select Case KeyCode
Case 9
ActiveCell.Offset(0, 1).Activate
Case 13
ActiveCell.Offset(1, 0).Activate
Case Else
'do nothing
End Select
End Sub.....................
I'm using two comboboxes to simplify data query of a database: the first narrows the query by displaying employee names, the second narrowing the selection further by displaying the equipment that employee owns. I am able to populate both comboboxes fine.
The first combo box for employee names:
Code:
Private Sub UserForm_Initialize()
Dim ws As Worksheet
Set ws = Worksheets("User&EquipOverview")
[Code]....
Where I am running into trouble is that I want the selection made with the equipment name combobox (ComboDevice) to populate several textboxes with values related to that specific selection in the database. That is, the combobox population needs to have the cell location included as information to pull the correct information.
Each employee has several pieces of similarly named equipment, so it's not so easy as to search the initial list for the value of the combobox selection.
I have attached my Excel File with the userform I am trying to do. What I am trying to do is change the table in the listbox based on the selection of the combobox and then my selection in the listbox will pass the selected values to Range A1:C1.
Excel 1.xls
I have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
View 6 Replies View RelatedI am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code:
Sub cmbLnOffNum_Change()
Dim idx As Long
Dim LnOffRow As Long
[Code]....
I have a question on how I could populate data using a combo box selection in Excel 2010.
For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.
Maybe to make it clearer...
Table 1
Name | Address | Phone number
Andy | Avenue 2 | 999
John | Road 5 | 998
Combo box (selection of names): John
Data derived from combo box - Table 2
Name | Address | Phone number
John | Road 5 | 998
how I could solve this Also, do let me know if this can be done without the use of VBA.
I need to populate a worksheet's rows with values from 2 comboboxes and a listbox which can have multiply selected items. After finding the row's last free cell, I have the listbox values properly populating correct column. However, I not sure how to get the corresponding combobox values assigned to the appropriate columns.
View 2 Replies View RelatedI have created a UserForm that has a ComboBox and depending on the number selected I want it to show that number of Labels/TextBoxes...
So if I select "0" nothing is shown, if I select "1" one set of Labels/TextBoxes is shown, select "2" and two sets of Labels/TextBoxes are shown... but also if I have selected "2" and then select "1" I want the second set to be hidden again...
Also I know I should have renamed the Label/TexBoxes to make it easer but I was adding things and making it up as I went along...
I'm using Excel 2010 on windows 7.
Code:
Sub UnHide_NewRoutings()
If (Engineering.ComboBox2.value) = "0" Then
Engineering.Label4.Visible = False
Engineering.TextBox5.Visible = False
Engineering.Label9.Visible = False
Engineering.TextBox9.Visible = False
[Code] ..........
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
I am trying to create a spreadsheet which allows me to select an antibiotic from a drop-down menu (refer to cell D1) on Sheet 1.jpg, which would then color the cells below based on the color-coded coverage based on another sheet (refer to D2-D17 of Sheet 2.jpg).
View 10 Replies View RelatedI am working on a spreadsheet that is essentially a question and answer based document .... I need to set up the macros so that if a certain response is chosen from a list, it will automatically update the cell / row next to it with a pre-determined response ....
The way the spreadsheet is set up is that the first column has the question, the second column has the answer (yes, no or N/A - from data validation - as a list) and the third column is blank - but is titled "comment/action" .....
For example: if the question is "have you locked the car" and the answer column selects "NO" then I want the "comments/action" to come back with "you need to lock the car", and if the answer is "YES" then I want the comment/actions column to remain blank ...... The same with N/A ......
I will have around 100 questions in the document ...... I know I need to set up the responses on a separate worksheet - i just dont know what the macro's are to identify and place the appropriate response from the worksheet to the relevant comment/action column .....