Im trying to add a print button to a userform. But three things that have to happen when the button is clicked:
1.Excel has to tell the print dialogue box to ensure the page will only fit on one page by one page
2.The print dialogue box has to pop up so the user can ensure the settings of the print
3.Right now when the print happens scroll bars are printing from the userform. I need those to disappear
This code in its current state is messing with me, it appears I set it to one page by one page but yet when the print happens its only printing the last part of my userform. And right now it also does trigger the dialogue box so that part is solved. I just cant figure out why its not resizing to one page by one page.
user form that has a list box that only picks up visual worksheet (not hidden ones) and then allows the user to select which ones to print via check boxes.
I am trying to create a command button on a userform that when pressed will only display a specific worksheet of an excel workbook. I have the userform setup with the command buttons that will point to a specific worksheet but it is still behind the userform.
How can i make it so that when i hit the command button in the userform then print preview is shown for that worksheet, and the other worksheets are hidden. I also want to make it so that the workbook is hidden and all you see is the userform until you select a sheet.
When I click the excel printing icon, I want a userform to pop up in which I make the choice for a certain customview that I build. This customview must then be printout. Note that I want to use the standard Excel print icon, not a custommade one in the worksheet. I figured out some code, but it doesn't work. For instance my if structure returns "false" even if I did click that commandbutton, see the code below.
Private Sub Workbook_BeforePrint(Cancel As Boolean) Static PrintRequest As Boolean formMyview.Show If formMyview.CmdCancel= True Then MsgBox "printrequest canceled" Unload Me cancel=True Exit Sub End If If PrintRequest = True Then Exit Sub End If If formMyview.CmdOk = True Then For Each Myoption In frameViewoptions.Controls If Myoption.Value = True Then..........................
In fristWB i have UserForm in which their is TextBox_1 & Transfer_btn-->cmdbutton ..with transfer_btn i want anything written in TextBox_1 should always paste new row in secondWB workbook I am trying to do this with USERFORM
Private Sub Worksheet_Calculate() frm_document.Show End Sub
A userform is called up upon a calculation change in the spreadsheet on two computers and has for years. We just hired a new employee and the userform is not pulling up for her. Instead she gets an error: Runtime error 75...Could not find the specified object.
I'm having some problems with SetFocus on a user form that I am using. Code is Below.
Dim Answer As Variant With cboAccount If .Value "" And .ListIndex = -1 Then Answer = MsgBox(cboAccount.Value & " is not a registered account, would you like to add it?", vbYesNo) If Answer = vbYes Then Load frmNewAccount frmNewAccount.txtAccountName.Value = frmEnterTransaction.cboAccount.Value frmNewAccount.Show If Answer = vbNo Then cboAccount.SetFocus End If End If End If End With End Sub
basically the code asks if the if the answer placed in a cboAccount (combo box) is valid against the list designated to that combo box,
If the entry is not valid a message box appears asking if they would like to add the entry to the valid list if they do not want to do this they can click no and in which case I wan't the focus to be set back to the combo box however currently the setfocus command above does not does not work and the focus is set to the next text box.
I have a UserForm which enables the user to input sales figures for each month for 5 years.
At the bottom of each year is the total box.
At the moment it only sums the 12 months when each month has a figure in it. Sometimes the user only needs to enter, lets say, 4 months figures and the total box doesn't work. It also doesn't sum as data is entered i.e. it only adds them up when all 12 months TextBoxes have a number in them.
Can I literally make it as simple as it would be on a normal worksheet i.e. =SUM(A1:A12) ??
Here is my code that is 'in' each month's TextBox
[Code] .....
End Sub
The total box itself - txtY1Total - doesn't have any code in it.
Below is code i wrote to change a password. password value is hidden in cell iv4 in different sheets. My userform contains 3 textboxes and button to run macro. As long as old password matches cell value AND new password is entered twice correctly then it will change value in cell iv4.
I have a UserForm with Combo Boxes, List Boxes, Text Boxes etc. When the OK button is clicked I want it to ensure certain fields are not left blank and notify the user (see code below). This works great for the combo boxes but not for list boxes. It seems to skip over that code. In other words, in the code below, if a manager is not selected, it doesn't notify the user.
Private Sub OkButton_Click() 'Verify fields are not left blank If cboAgent.Value = "" Then
I have a userform with two buttons : O.K. and Cancel When I use the O.K. Button, all is correct, but when I use the Cancel Button, it doesn't work. What line I have to add, to leave that userform ? (Cancel : CommandButton2_Click()
Sub CommandButton1_Click() Me.Hide End Sub Public Function userChosen() Me.Show userChosen = Format(DateSerial(cmbJaar, cmbMaand, cmbDag), "dd.mm.yyyy") Unload Me End Function
I have a user form that has a label "txtcompno" which displays a "Auto incrementing" number everytime the user form is opened. e.g. 90001, 90002, 90003 and so on. This was working fine till yesterday, but has since stopped working for some reason: This is the code I wassuccessfully using before:
Private Sub UserForm_Activate() Me.txtdate.Caption = Format(Now(), "dd/mm/yyyy") Me.txtcompno.Enabled = True Dim iRow As Long Dim ws As Worksheet Set ws = Worksheets("ComplaintData") ' find last data row from database iRow = ws. Cells(Rows.Count, 1) _ .End(xlUp).Row If ws.[A2].Value = "" Then Me.txtcompno.Caption = 90001 Else Me.txtcompno.Caption = ws.Cells(iRow, 1).Value + 1 End If End Sub
but now its giving me error - "Run time error 13 : Type mis-match". and its highlighting the line: Me.txtcompno.Caption = ws.Cells(iRow, 1).Value + 1
I have a User Form that is used to collect data. CommandButton1 loads the User Form data into the worksheet and CommandButton2 clears all data from the Form in preparation for entering the next record. Immediately after a user first opens the Form, the very first time CommandButton1 is clicked, the Enter Key stops working. At this point data can be typed into any TextBox on the Form, but when the Enter Key is pressed the cursor remains in the TextBox. (The Enter Key will not move the focus to the next Textbox in the Tab Order. Also, if I alter the code to set the focus on a CommandButton as the active control instead of a TextBox, pressing Enter on the active CommandButton does not execute the CommandButton's macro... the same behavior as a TextBox; nothing at all happens when the Enter Key is pressed even though the CommandButton has focus).
At the point when the Enter Key stops functioning, if the user presses 'Alt-Tab' to leave the Form and then immediately uses 'Alt-Tab' to return back into the Form the Enter Key suddenly works again and continues to work correctly from that point on even after CommandButton1 is clicked. Again, the Enter Key stops working ONLY the first time CommandButton1 is run immediately following initially opening the workbook and Alt-Tabing into the Form immediately corrects it. I saw one other post in this forum with this same problem in 2003, but unfortunately it did not get answered.
I am trying to develop some data package for my office and created Userforms to add/input data, and amend/modify data. To input its working fine. But when I want to amend/modify the records its not working. I am new to Userforms, Codes. Can anyone help me by rectify me coding, for which I am attaching the sample sheet.
I am working on a "Salary Payment voucher excel Userform".
How can i do it, if i don't want manually fill in the number of working days into the textbox myself, Can i have the userform to automatically fill in the number of days when i initialize the userform.
I would like to know if there is a way to print several different workbooks at once but keeping my printing format which I would like to be Landscape and Fit to one page. Reason is simple as I work in a office where staff is handed in several jobs to do everyday. They finish the jobs and log all the info on the database. I log on to database and put all their daily diaries and because it is all over the place I have to go in each file and set printing preferences which takes an hour in the morning and hour in the evening. I could do with some sort of automation where all diaries are automatically printed in Landscape and Fit on one page.
I have a report that is generated from a manufacturing process that looks like the example below. the report is 40 pages long when all the data is printed. i am looking for a way to only print this range if a dimension is "out of tolerance". if the dimension is within tolerance, there is always the "garbage" text of plus and minus. if every row is "within tolerance" in the range the cells in the OutTol column would all contain the "garbage" text but it will not always be identical. so, in summary, actual OutTol values = print and all "garbage" = not printed.
I have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.
Private Sub Worksheet_change(ByVal target As Excel.Range) If target.Column = 1 Then ThisRow = target.Row startRow = 1 i = 1 Set ws = ActiveSheet maxRow = Cells.SpecialCells(xlLastCell).Row maxCol = Cells.SpecialCells(xlLastCell).Column ActiveSheet.UsedRange.Interior.ColorIndex = xlNone Do While i
I am automating a paper form that collects information from 7 other paper forms and then prints out the results. I have created an excel spreadsheet to do this but I am having problems getting the printed output to match the print preview.
I have inserted an image of the form into the sheet header and aligned the cells on the sheet so that the information is in the correct position when previewed in "print preview".
The problem is that, although this will print correctly on the machine I created it on, it is misaligned on any other machine I have tried.
I've made a 40 page list on Excel, On the very top of this list is my titles of whats is in the collums. How do I repeat this through out, so it appears on the top of every page.
I have inserted checkboxes in an excel worksheet to turn on/off certain data. They are working just fine. But I have set them all to not print (by unselecting the checkbox that says "print" in the format dialogue). SOME of the checkboxes don't print, but most of them do. I can't figure out why.
