I am blanking out. I want to pull the data out until a space (one formula from the left and one from the right). Ithink it's a mid function but not sure.
Example
John, Doe
I would like to get:
John,
and
Doe
I'm looking for a formula that pulls the text from a cell unti it hits a space. I'm using the formula below but keep getting #VALUE results. B1: =LEFT(A1,FIND(",",A1,1)). I know it's not that hard but can't figure it out.
View 4 Replies View RelatedI have two words of differing character lengths separated by a space.
How can I remove the first word... essentially, all the charcters to the left of the space AND the space itself?
Sub GetThatstring()
Dim strMonth As String
Dim iYear As Integer
Dim StrMnthYear As String
strMonth = Trim(Left( Range("A1"), _
InStr(1, Range("A1"), " ", vbTextCompare)))
MsgBox strMonth
iYear = Mid(Range("A1"), _
InStr(1, Range("A1"), " ", vbTextCompare) + 1, 4)
MsgBox iYear
StrMnthYear = Trim(Left(Range("A1"), _
InStr(1, Range("A1"), " ", vbTextCompare) + 4))
MsgBox StrMnthYear
End Sub
I have a column of cells likes:
5/5058 Jack Daniels
5/29AA Crown Royal
I want to delete everything to the left of the first space.
So it will look like:
Jack Daniels
Crown Royal
It has to be vba though. I have done alot of trim in just formulas but this is first time in VBA. The above code is one I found by searching but not sure what to do to modify it.
This will be for range AM2:AM2000
I am trying to write a function that finds and breaks a cell about the first space.
Worksheet is:
=LEFT(name,FIND(" ",name)-1)
Have tried...
Function Firstname(name)
Dim Space As Integer
Set Space = .Find(" ", name)
Firstname = Left(name, Space)
End Function
and also...
Function Firstname(name)
firstname = left(name,find(" ",name)-1))
End Function
I'm looking for a way to split a cell with text into two cells. The first cell can only contain up to 40 characters, the rest needs to go in the second cell. However, I don't want the text to be split in the middle of a word. So basically, if the text is in cell A1, I need to find the closest space to the left of position 40 in A1, and move anything to the right of this position to B1. Example:
Original text:
A1: One green apple and a bucket of small onions that smell nice
I want to avoid this:
A1: One green apple and a bucket of small on
B1: ions that smell nice
I want to achieve this:
A1: One green apple and a bucket of small
B1: onions that smell nice
I can do this in Excel, but I don't seem to have a single example to hand of how, using VBA, to extract all characters up to but not including, the first space character in a cell.
View 9 Replies View RelatedI want to take a lot of text fields with alphanumeric characters ie. " '49560-960-A908 "
(always beginning with the character " ' ") and display in another cell position 2 thur 6 ie. "49560"
I have a file that contains 3,500 cells with alphanumeric characters...always beginning with ' but I need the 1st 5 numbers after the ' in a second separate column
In a1 i have 100.888 and a2 122.222 and a3 122.555UK,(and so on) in column b i want just want the number and not the uk, i have tried =left(a1,7) which works until a3 then it give me characters 122.555 and not the number/value 122.55. I need it as a value to use the vlookup, how do i do it?
View 3 Replies View RelatedI have a spreadsheet as attached where there are titles in row 3, but I want to go along each row and pull up all the data below to the immediate row below the title. This is different in each column but you will see what I mean. I do want this to be VBA and the real spreadsheet has many columns so it needs to cycle along I guess until Row 3 is empty?
View 2 Replies View RelatedIs there a way to extend the space of my userform beyond its maximum space? I have tried using vertical scroll bars but they were of no use.
View 1 Replies View RelatedI have been working on different formulas to return the text string between the first and last space and have been unsuccessful. Is this possible?
I have tried several combos or Left and Right, I have been able to get the values after the first space, and the values before the last space, but not between the spaces.
String: Y60
~C CULT NUCLEUS 3X2 SPRING WST BK XL
Desired results: D60
CULT NUCLEUS 3X2 SPRING WST BK
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
I have the following formula that works fine until someone uses the space bar to clear a cells contents
=COUNTA($D11:$AI11)
When the space bar is used to clear a cells contents the COUNTA statements includes the space in the count. How do I count the number of cells with content and exclude the space bar space in a cell?
If find dot. with out space in ( A1 ) cell remove space after dot in cell ( B1 ) Cell, vb or macro
A
B
M V Micunovic
MICUNOVIC,M V
L.T.Kudrjavceva
KUDRJAVCEVA,L. T.
D Sumarac m.l.
M. L,D SUMARAC
I only want to remove one space at the end of my text within a cell, if there is a space.
Code:
Sub hth()
Dim c As Range
For Each c In Range("H1", Range("H" & Rows.Count).End(xlUp))
c.Value = Trim(c.Value)
Next c
End Sub
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
I have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698
I want to grab everything left of the last occurrence of "." in a string, and in the next cell everything right of the last occurrence of "."
so say the string is 111.111.1.222
column 1
111.111.1
column 2
222
my current code (which works, but its messy) for the first cell is
I have a column that is giving unwanted value . dont know the reason as that excel file has been created by some other guy and I just started working on it .
My Question is how to move to 2 cells left(A for example) from from that unwanted value column. and check if
A is equal to cell above it , means B Cell(Row above A but same column).
As my excel file is totally based on Forms, Macros, I am not quite familiar with macros.
Is there any way to put if condition in one cell (column) and drag it all the way down which should work for all the values in these 3 column.
And also if A=B then I want to make that unwanted value cell="".
We have a system that used to export postcodes with the " "(space) in the correct space, the system has changed and no longer requires exposts with spaces
I need a formula that puts in the space depending on if it has 7 digits or 6
For Example
TE557TT needs to become TE55 7TT if postcode is 7 chracters " " after 4
TE57TT needs to become TE5 7TT if postcode is 7 chracters " "" " after 3
I have list of phone numbers on excel.
I have A1 as xxxxxxxxxx(with out space)
I want same to be viewed in this format xx xxx xxx xx
When presenting spreadsheets to suppliers for markup and corrections it would have space for them to write or make handwritten notation between rows on the printout. I've tried using alternate rows in Excel, but after a sort, Excel groups them all together again.
Is there a convention for adding space between rows?
how do I put a space?
12345 ** =A1&B2 gives me 12345CD
but I want 12345 **
Some code where i can add a space after each comma in a string?
I would like to do this VBA. How to do this formula as there could be several of commas in the string
How to make space between the figures ex:11480831525 i want like: 11480 831525
because i want to do it for thousand of transactions in one time by using only one formula.
When using SUBTOTAL for counting values in a column, well this function is counting also the blanks cells having space inside
Well i can use an COUNTIF to avoid this problem, but when using autofilter , the count is gone, that's inconvenient.I can use autofilter to select blanks and then delete space inside but is quite long.
I chopped a macros inspired by jindon:
Sub SpacesBlanks()
Dim X As Integer
Dim r As Range
X = CLng(InputBox(Prompt:="Quelle colonne?"))
If (X < 1) + (X > Columns.Count) Then Exit Sub
lastRow = ActiveSheet.Cells(Rows.Count, X).End(xlUp).Row
For Each r In Range(Cells(1, X), Cells(Rows.Count, X).End(xlUp))
If r.Value = "" Then
r.Value = ClearContents
End If
Next
End Sub
At the top of my spreadsheet I've got the date displayed using TODAY(). In 'G5' theres a proposed collection date.
In 'F5' I entered, =IF(G5>$D$1+1,"PENDING","NOT COLLECTED"). Which is fine except, if 'G5' is blank I want 'F5' to be blank also. And if a date is removed from 'G5' I want 'F5' to be blank. I've tried various things with "" but I cant get it to do what I need. I'm sure this is very easily cured, but not by me clearly..!
I have a set of data in a column and I'm trying to add them but can't because of the way it was imported. Each cell has a number with a space at the end. How do I remove that space without having to manually go in there and deleting via F2 > backspace, F2 > backspace, and so on.
View 3 Replies View RelatedI'm trying to automate the importing and processing of a fairly large formatted text file (~15000 lines) containing many tables of data. I've been refining this process for several months and recently was alerted to a problem. A few of my tables have widths greater than 255 characters (309 to be exact).
My process involves opening the text file in Excel then performing a .Copy on the Worksheet into ThisWorkbook, naming the sheet "Source". I then perform up to 66 separate parse operations on the various tables depending on which options a user selected from a form.
The problem is that I assumed that the Copy Method would simply make a duplicate of that sheet in ThisWorkbook. Instead, it seems to have truncated any columns that are longer than 255 characters, leaving me with partial data in a few tables.
My workaround was to perform a TextToColumns on the text file prior to the import such that it would simply split the data into columns that could be reassembled on the other side. In doing so, I seemed to have stripped a leading <space> from each cell which was apparently put there previously. This is causing a lot of problems for my formatting code which also uses TextToColumns to separate the tables into columns. The simplest solution seems to be trying to add the spaces back in, assuming there isn't a better way to import this data in the first place.
Just prior to copying the sheet into ThisWorkbook, I'm using the following code after the TextToColumns to add the space back in, but it's taking an awfully long time and causing a noticable time delay in processing my code and adding considerable size to the finished workbook it creates. If someone could recommend a better solution, either to the import process or to replace this God-awful loop, I'd appreciate it. Thanks.
Application. ScreenUpdating = False
For i = 1 To 65535
wkbk.Sheets(1).Cells(i,3).Formula = " " & wkbk.Sheets(1).Cells(i,1).Value
wkbk.Sheets(1).Cells(i,4).Formula = " " & wkbk.Sheets(1).Cells(i,2).Value
wkbk.Sheets(1).Cells(i,1).Formula = wkbk.Sheets(1).Cells(i,3).Value
wkbk.Sheets(1).Cells(i,2).Formula = wkbk.Sheets(1).Cells(i,4).Value
Next i
wkbk.Sheets(1).Range("C:D").ClearContents
Application.ScreenUpdating = True
Also, I don't know how long the actual file will be, so I'm almost forced to assume 65535...