Analyze Specific Data Based On Separate Criteria
Apr 22, 2013
I have a huge list of survey responses which asks people to identify their location and then rate how important 6 facilities in their area is (rating 1 - 4, 4 being most important). So the table has cells are similar to this, except that there are about 5000 responses with about 2500 different locations identified
Location
Location
Location
[Code].....
I have been able to analyse the average results for the whole dataset by using the following formulas:
=COUNTIF(A2:C4,"camden") Count number of occurrences a location is listed
=ROUND(AVERAGE(D2:D4),2) Average response for medical centres
=COUNTIF(D2:D4,1) Counts number of times '1' comes up, would repeat '2', '3', and '4' to create a pie graph
But what I would really like to do it be able to count each response for each question by location (for example "Camden"). I've tried both of these but they don't seem to be working.
=IF(A2:C4,"camden"),COUNTIF(D2:D4),1
=COUNTIF(D2:D4),1,IF(A2:C4,"camden")
View 6 Replies
ADVERTISEMENT
Jul 20, 2009
I am trying to add separate columns together to get a total count of a specific criteria. The formula I am using is:
View 3 Replies
View Related
May 20, 2014
automate a data table I set up in excel. I need the formula to look through a bunch of raw data I have, and add quantities in each row, but only from the rows that have the same machine numbers. I attached the document of raw data I've collected, and on a separate tab, an organized table. I would like this table to automatically be updated with the appropriate data, as I enter it as raw data.
View 3 Replies
View Related
Apr 23, 2014
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
View 9 Replies
View Related
Jun 30, 2014
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
View 5 Replies
View Related
Jul 1, 2014
I have an excel sheet with data from Column 'A' to 'S'.
I want to identify duplicate entries in Column 'J' and from those identified columns I want to further search Column 'K', highlight the matching text and then fill text in Column 'L' should have the missing data after matching the 'A' and 'K' cells.excel_duplicate_entries.png
View 9 Replies
View Related
Dec 23, 2011
I'm using excel 2007 and I'm trying to import data from a .txt file into excel and analyze the data. One of the columns in the .txt file contains descriptions for each row and its in multiple rows. Is there a way to import the .txt file so that it will show a description for each row in one cell?
I imported the data into excel but the issue is the description.
View 3 Replies
View Related
Jun 18, 2013
I have repetitive task of copying and pasting. Macro to sort some data.
I have time values (sorted in order) in Column A and a value in Column B.
Sheet1 AB1TimeValue
200:00:002300:00:002400:00:001500:00:002601:00:004701:00:002802:00:001902:00:0021002:00:0031102:00:0041202:00:0011302:00:002
I need separate the time each hour of data into columns. So the above would become
Sheet1 ABCDEF1TimeValueTimeValueTimeValue
200:00:00201:00:00402:00:001300:00:00201:00:00202:00:002400:00:001 02:00:003500:00:002 02:00:0046 02:00:0017 02:00:002
There are a different number of rows of data for each hour and sometimes there might not be any data for a specific hour.
View 4 Replies
View Related
Apr 25, 2006
I'm trying to set up a macro which will import data from one worksheet to a master sheet. I need it to copy the information into specific columns but not overwrite any existing information which is already in the Master Sheet, but I don't even know where to begin.
Just so you're clear on exactly what it is I'm trying to do... I have a Master Sheet which lists all of our suppliers prices, margins etc etc... However, when we use a new supplier we send them a greatly condensed version of the Master Sheet - We call it the Supplier Sheet (no big surprises there)!
When the supplier sends it back to me I have to type it all out manually which is kinda time consuming. I'd really like to set up a "push button" system which allows me to simply drag the Supplier Sheet into the workbook, add the info into the Master Sheet, then be able to delete the now useless Supplier Sheet.
(I have attached a test copy of the file - all of the columns in blue are the ones which need the data adding to).
View 6 Replies
View Related
Jul 16, 2007
I need to determine the MAX date in a column based on specific criteria. Column A6:A500 = Task Names, Column N6:N500 = Dates (there are some blanks).
What I need is to determine the latest date in column N6:N500 based on which task I choose from column A6:A500.
View 9 Replies
View Related
Jul 6, 2014
I am looking for a VBA that could populate from column (A2:A5) to cells (B2:F5) as in the attached spreadsheet, based on the frequency, in a five year time-frame.
screen_print.JPG
[Code] .....
View 1 Replies
View Related
Dec 21, 2011
I am getting an error i have list (sheet4) i want to lookup the data from different table (Name range) based on the location in column A i am using the small function copy down, in cell C6 i want the range ROWS($A$2:B6) go back to ROWS($A$2:B2) since the criteria in column A has changed from China (A5) to US (A6)
Sheet4ABC1Locationproductsamount2ChinaA2954.63ChinaB1565.284ChinaC3772.055ChinaD2027.76US#REF!#REF!
Array FormulasCellFormulaB2 =INDEX(INDIRECT(A2),SMALL(ROW(INDIRECT("2:10"))-ROW($A$2)+2,ROWS($A$2:A2)),1)C2 =INDEX(INDIRECT(A2),SMALL(ROW(INDIRECT("2:10"))-ROW($A$2)+2,ROWS($A$2:B2)),2)B3
[Code].....
View 1 Replies
View Related
Jan 3, 2013
I'm trying to create a formula that tells me the following:
If the item is marked as closed (vs. active), then how many renewals/terminations replacements/etc are there? These are two difference columns in a worksheet.
View 2 Replies
View Related
Jun 20, 2007
If I have the following table:
Name ProductSize QuantityPrice per unit
AX35510
AX451015
AX551210
BX601010
AX35510
I now want a resulting table that will combine all rows where name, produc, size and price are identical and have one row with the same data apart from the quantity that will have been added - so for the table above the resulting table will be:
Name ProductSize QuantityPrice per unit
AX351010
AX451015
AX551210
BX601010
View 9 Replies
View Related
Nov 10, 2006
I have a report which is split into page sized chunks, in column P I have an identifier Planned, Booked or Running.
Is it possible to build a macro which says something along these lines
If P1 = "RUNNING" Then
Print that Page
Else
Go to P44
If P44 = "Running" Then
Print that page
Else
Go to P87
and so on until the cell selected is blank then stop.
View 5 Replies
View Related
Jun 8, 2014
I am attempting to place a formula in cell b3 in the attached spreadsheet on the "sheet to pull data into" tab 1 (cell is highlighted yellow) to retrieve value in the yellow highlighted cell in the "Sheet that contains data" which is on a seperate worksheet within the same workbook.
The cells highlighted red in the "sheet to pull into" tab (cells: a1, a3, b1, and b3) are the criteria that needs to be matched to those cells on "sheet that contains data" tab in order to ensure the value returned is correct.Sample of problem.xlsx <----see the attached sample spreadsheet.
View 2 Replies
View Related
Oct 20, 2011
how can i sum base on the Criteria in Columns G, in this sample the sum should be 67.
Sheet1ABCDEFG1V. GoodGoodFairBadN/AReported29853N/A8Bad31085328N/A410953N/A8Good510853N/A8Good61085378Good77853N/A8V. Good810853N/A8Good910753N/A8Reported108853N/A8Good11585308N/A1210653N/A8Good1367Excel 2010Worksheet FormulasCellFormulaG13=67
View 9 Replies
View Related
May 7, 2012
Each week I run a report that produces over 2,000 rows. I have to manually go through and delete things, by the time I am done, there may only be 320 rows left. I would apply a recorded macro, but the report is not consistent each week. There may be more or fewer rows depending on the week.
I would like to be able to run a macro that looks in column B for a specific value and if it contains that specific value, I would like the cells to the right of it to have their contents cleared.
Next, in column C, I have...
Employee2's Name
Employee2's Number
SPACE
[Code]....
I would like to be able to delete the rows, starting from Employee 2 to just before the second SUB TOTAL.
So, all I would have left in column C is
SUB TOTAL
SPACE
View 9 Replies
View Related
May 12, 2009
I have a worksheet with 10000 records. For example, entire data in ColA-ColZ. In that, ColA-ColF - Personal Information; ColG-J Group1; ColK-N Group2; ColO-R Group3; ColS-U Group4; ColW-Z Group5. I this case, the data to be copied into another sheet as follows:
1) the personal data should be copied repeatedly.
2) Each Group data should be copied next to personal data.
3) The group's name is mentioned at the top of the datasheet.
I have attached a sample workbook for your kind reference.
View 2 Replies
View Related
Nov 7, 2007
I have a "memo of meeting" excel document used to capture notes during client meetings. In this document there's a cell for "purpose", "agenda", and "notes". The 'consultation type' cell is a drop-down populated by values set in Sheet2. The 'agenda' & 'notes" cells are then populated with information (also stored in Sheet2) based on what drop-down option was chosen in the 'purpose' cell. I'm currently making this happen with basic =IF() statements; however, the problem is that by doing it this way, the =IF() statement must reside in the actual cell which will end up showing the data.
This is undesirable as there may be additional notes, agenda items, etc. that I'll need to add during the meeting and as it's currently setup, I can only have either the pre-populated info OR the ad-hoc notes - not both. It seems a simple fix. Maybe put the =IF() statement in a cell off to the side but have it "assign" the value to 'agenda'/'notes' but that doesn't seem to work.
View 9 Replies
View Related
Jan 14, 2008
I have a spreadsheet of ~5000 rows of data that I would like to separate based on the product code column (11 product codes - 43,301,304,313,332,334,979,984,985,986,992). As it stands, I've been copying the sheets, then removing the data by filter, but doing this every week seems to be a waste of time.
View 9 Replies
View Related
Jan 9, 2011
I looking for a macro that will go through multiple sheets & change specific cells to values if the column header is = to value set in specific cell.
for example
I would like the macro to look at row 3 in each tab (page 1, page 2, page 3) and if the value you is equal to X (parameter input on different sheet) then change the formula to a value in row 6 & row 12 of that column.
I'm attaching an simple example that i looking for this on. The green cells are the one i would like to change to a value.
Book1.xlsx
View 8 Replies
View Related
May 8, 2009
I'm racking my brains as to how I can structure a formula to conditionally rank a value in an array against only those values in the array whose corresponding criteria cell includes a specific letter.
So for example I have a list of 12 values, say 126; 239; 0; 171; 162; 157; 130; 199; 122; 153; 0; 15.
Each of those values corresponds to a heading, say: CDE; DFE; FGE; DFE; ERD; DEA; BDF; DFB; CDE; CEF; CAB; FAB. As you will note some of the headings may or may not be the same and may or may not include the same letters in different orders.
How can I write a formula that ranks in ascending order a given value drawn from the above list (which will be in another cell but which in this case is, let's say, the first value: 126) only against those values whose heading includes a specific character, for example the character C (the character in question will vary and be defined in a specific cell).
As an added complication I need the ranking calculation to exclude any zero values. So in the above example what the formula needs to do is rank the value 126 against a sub-set of the whole array comprising only the values 126; 122; 153; 0.
The answer I need is 2 because, discounting the zero value, 126 is the second highest value.
View 9 Replies
View Related
Oct 4, 2013
How to pull data based on column B to individual tabs.
I have the following data:
A B C D
Jane Doe | L1 | 20% | High
John Doe | L2 | 15% | Medium
Mike Smith | L1 | 60% | Low
Marie Smith | L4 | 10% | Low
I want to have the first tab/spreadsheet only pull records that have L1 values for column B
In the next tab/spreadsheet I want to pull records that have L2 values in column B etc.
What formula can I write that will pull all L1 records (A.B.C.D) in to Tab 1, then all L2 records (A,B,C,D) into the next tab?
View 10 Replies
View Related
May 22, 2014
I need to split the data into worksheets (see attached) by the Advertiser column and then by the deal year and deal code columns. I need each worksheet to be named per advertiser and deal year_deal code. I took off and replaced the data since it is sensitive information.
creating a macro or implicating one into the workbook to run for future reporting.
View 13 Replies
View Related
Apr 11, 2012
I am looking to split data in a worksheet into separate sheets based on Column C which contains Either Babycare or Homecare or Industrial or Professional. Eventually there maybe more names. If possible I would also like to name each sheet.
My VBA skills is limited to this particular task.
View 2 Replies
View Related
May 23, 2013
I have a huge listed of assets - the column i where my info is has vasrious serial numbers.... some are a simple string of letters/numbers and the others look like this for example AG-1234567
I need to somehow pull out the ones that look like that. (AG-1234567). I only need those. Now normally i would just do a filter and pull em out however, this sheet contains 73k worth of items.
what would be the formula to perform such a task?
View 2 Replies
View Related
May 20, 2013
Trying to find the right Excel formula on the example below:
2013 2013 2013
Jan Feb Mar
Ant 0 10 10
Bee 0 0 0
Cat 300 200 100
Where if I was to set the column criteria to "2013" and the row criteria to "Cat" I could return the summed data total as 600.
View 7 Replies
View Related
Apr 6, 2007
I have a data base with 12 columns of data. I need it to look for one criteria in one row, match it, look for another criteria in another row, match that, and then once those criteria are met, average those rows that met the criteria with the statistics in that row that contains a value.
Such as:
Monica 2 Timed 310 Michele
Tom 3 UnTimed 410 TC
Art 5 Timed 216 TC
Monica 4 Timed 415 Michele
Tom 6 Timed 200 TC
Tom 4 Untimed 216 TC
Art 8 Timed 410 TC
What I need is the formula to search in through the data, look for Tom, then find all the ones that say UnTimed, and then average the number in column 2 that match those criteria.
View 9 Replies
View Related
Jun 19, 2007
I have a big data sheet. I have approximately 2170 rows and 50 columns. In some rows I have a series of consecutive zeros. I need to build a formula that gives me the date ( located in row3) right before the first zero in the series of consecutive 12 zeros.
For instance in row 1340 I have a series of 12 consecutive zeros. The first zero happens in column AC, therefore I need the formula to retrieve cell AD3. however every rows has zeros located in different cells therefore I need a general formula.
View 9 Replies
View Related
