i have a 5 by 10 table (5 columns 10 rows)
values only equal 1 or blank
i want to re-order this table in another identical table so that no row will have more than one value (each row will have a maximum of one "1")
what i want to do is have a formula set up that works out who has the best position and then re order the number rows to put the player in position 1 at the top. so just moving cells c-n
I need to ensure that a worksheet is ordered after another in a workbook. The macro that this code is in opens a selected file and carries out various operatins on it, so although I can do this fine when the worksheet needs to be created, there are scenarios where it already exists and I simply need to change the order. The sheet that must come in position 1 does not have a common name and so I cannot reference it via it's name in the code. The other sheet is named when it is created so it doesn't necesarilly have to be in position 2, it's just that the other one needs to be in position 1.
A number of columns (B to U) contain names, details and scores of players. The A column contains the ranking, e.g. 1 to 100.
If a player (row) is deleted, that ranking number is also gone. Is there a way to make the A column always maintain the integrity and completeness of the numbering, e.g. if rank (row) 16 is deleted, the range of B17:U100 moves one row up and the former 17 is now 16? And if a new row is inserted, the ranking numbers after the insertion move up one row and a new number is added at the end?
2. There are 6 columns of scores, P to U. But out of these 6 scores, only the best 4 count for the ranking. The two worst (highest) scores are dropped. Is there a way to automate the process by selecting only the 4 best (lowest) numbers to be summed into the Total column (C), which in turn determines the rankings in the A column?*
And then can the whole range B2:U100 automatically be sorted according to the ranking in column (A)?
*It is possible that there are 3 or 4 bad scores, all with the same value. In that case only 2 could be discarded, and 1 or 2 would be summed into the ranking cell.
I have 320 rows of data, of which the date is in the first column. I need the data sorted into date order, ie. 04.05.12-->30.04.13 and all the dates in-between (note these are British laid out dates). I am aware, and have already done Format Cells --> Date --> 14.03.01, as this is how my dates are laid out.
I've tried sorting this column, ascending, descending etc etc etc, obviously it needs to be 'expanded' to ensure that the rest of the data in the row follows it to its new position. No joy. It only ever sorts the dates by the day ie. 02.04.13, 04.12.12, 06.06.12. Doing it by the day and not the month and the year also.
I have an enquiry where I'm trying to order error messages which occurs in if, ElseIf and Else Statements. The code I have works. However, I would like the error messages to be checked in a particular order. I tried rearranging the conditional statements but had no success. Here is my
I want to have them in order of shortest price (favourite) first with the relevant horse's name in the adjacent column. I have just discovered vlookup which seemed perfect - until I discovered that when there are two or more identical prices it only returns the 1st horses name.
Is there any way I can use vlookup to do this (with more than one identical value)
I need to make a spreadsheet on excel which shows the production schedule of a product over 4 days.
Then I need to make a supply ordering sheet which shows how much supplies are needed to do the above task and how much each item in the supply list will cost and when the items would need to be ordered.
setting up a stock ordering system in Excel. I have been sent a spreadsheet with about 400 items I've ordered before and about 15 columns of descriptions which include the name, category of item, manufacturer, cost, number etc.
I would like to set up a simple Excel spreadsheet which staff can use when they want to order some stock, which will automatically fill in the adjacent cells with the product category and unit cost, once the name has been typed into the first cell. Once I add the SUM formula I can therefore have an immediate total of how much each staff member is spending on stock that week, without having to look at the invoice I get back from the supplier.
I know Excel has a predictive text style feature (autocomplete?) but I don't know how to get it to automatically fill several cells in a row with data that is linked to the first cell.
I would like to reorder a list whilst ignoring any 0 values. I've attached (I hope correctly!) a spreadsheet of what I mean. It's pretty simple, but I've been banging my head over it for a while now!
Within this I would like to add a couple of features which check:-
1) If there is a number in column A - there should be one in column B 2) The numbers in column B are sequential i.e. 1, 2, 3 etc without any gaps in the sequence
1 - We receive an excel file from our customer (approx 20 different customers in total)
2 - I have an excel template we have to use, which will import into our MIS software. This excel template must remain the same or it wont import into our system. ie (Columns must be in this particular order)
3 - Our customer sends their own spreadsheets in their own formats ie, column in a different order to our excel template.
4 - I need to know if there is a quick way to remap customer columns into my excel template
5 - Im looking for a little application that will look at the customer spreadsheet and our template in the same window and let me link which fields need to map where in my template. When I have completed I can save what ive done and run when needed for this customer.
I have a list on flower names in column A , and the colors in Column B. For sorting purposes I have duplicates in Column A. I am creating an easier way for coworkers to organize the ordering process from wholesalers. On the order sheet It will have the dropdown that lets them choose the flower (ultimately I hope to make this searchable,) Once the flower is selected the next column will allow them to choose from the color available. Attached Is the sheet with my work so far.
To be more specific I can compare this with an electrical wiring table, where:
Key is the wire number Atr1, Atr2, Atr3 are general atributes of the wire number Set1 are the atributes of the first end of the wire, called "from": SubKey1 is the "from" device and its subatributes SubAtr1_1 & SubAtr1_2 Similar for the other end of the wire is Set2. This means that Set1 and Set 2 have similar format & type of data.
I have found on your site an example of macro that is doing the comparision between the 2 sheets of data but I encountered a problem...sometimes on sheet2 Set1 and Set2 are reversed and are highlighted as a difference but I don't want this. Please help me with macro that would create a rearranged copy of sheet 2 respecting the following conditions:
1. if Key from sheet1 cannot be found on sheet2 then copy entire row on sheet3. 2. if Key from sheet2 cannot be found on sheet1 then copy entire row on sheet3. 3. If Key from sheet1 = Key from sheet2 If SubKey1 from sheet1 = SubKey2 from sheet2 & SubKey2 from sheet1 = SubKey1 from sheet2 Then reverse Set1 with Set2 by swapping cells and copy entire row (with Set1 and Set2 reversed)to sheet3.
I must put in descendent order some columns, but the thing is a bit more complicated... As my english is not very good i am gonna explain it with a simple example:
---------------------------------- 1 4 2 5 rabit fox dog cat 2 6 1 3 bird fis wolf mouse ----------------------------------------
Ok, i must order the numbers in a ascendent way, but reordering one number means also reordering its correspondient name (the name of the animals at its right). So, again, with an example you will see it better:
Ordering the first row it must appear like this:
---------------------------------------------- 1 2 4 5 rabit dog fox cat ----------------------------------------------
I didnt know if i had to post it here or in other subforum and either if it can be done with excel.
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100. I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest) The problem is i will get "....A file name already exist...do you want to overwrite.." prompt. Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.
I would like to have a macro to automatically generate a statistics table (on the "statistics" tab) with the 5 following fields: Fragment names / # samples / # of failed samples / % of success / # of variations in the fragment (SNP). At the bottom of this table, I would like to have a cell with the average % of success for all fragments. The data to generate these statistics are on the "gene name" tab (please note that this name will change every time I will work on a new gene). To make things easier, I think the macro should be run from this tab.
1. The Fragment names are displayed in row #5. I use one column per variation per fragment. If one fragment has 3 variations, there will be three columns and I will merge together the fragment name cells. The fact that some cells are merged can be a problem when copy-paste to the stats table (as I would like to get rid of the merging).
2. # of samples corresponds to the number of cells in blue in column A. The number of samples can change from one report to another but is always constant in the same report.
3. # of failed sequences. In the table, I type "Failed Sequence" (if the analysis has failed) and "Missing Sequence" (if the analysis has not been done). When a sample is failed or missing, it is for the who fragment, no matter how many variation there is in the fragment, so I usually merge the cells of all variations for this failed sample.
4. % of success: this is quite easy #sample/#of failed+missing sequence for this fragment
5. # of variation is equal to the number of variations for this fragment (can be 0, 1, 2, etc.). When there is no variation in a fragment, I put '-- in all cells of the corresponding fragment on the "gene name" tab. Fragment 3 on my file is an example of 0 variation.
I have a very large excel data file, which I want to analyse using pivot tables. The problem is that while most of the columns are headed with the variable name (e.g. country) and have the list of variables displayed under that heading for each observation (e.g. Italy), the years are spread across the columns - i.e. the heading for column X is not "Year", but is 2003, with the next column being 2004, etc.
Is there a quick way I can re-arrange the data so that the layout is consistent and so that I can use it for pivot tables? I have way too many observations to do this by hand.
Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
There is pivot table for some reason the last column (YEAccts), which sums all the other columns values is exluding the 1st column for some reason. This "YEAccts" shows up fine in the pivot table "field list". And I followed the source for this and it's a table in a different tab that pulls data from an access query connection.
The name of the column that is summing up the rest of the columns is "YEAccts", but for the life of me I can't seem to find where this column is in the source table tab or even in the access query where the data is being pulled from.
How to find this "YEAccts" column? Also, why would it exclude not summing up the data in the first column?
Recently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.
Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)
I have a table with list of equipments and asset number assigned as primary key, I wanted to have a history movement of these equipments but my idea is somehow not logical and very primitive to update every time 2 excel sheets:
I created a lookup table that works quite well. It even has if statements in the LookUp Formula. However, I have to update the table it pulls the information from each day. I wind up recreating the range each time because the table always has more rows each time. Is there a way I could just paste the table in each day and not have to change the range? The columns never change.