Re-ordering Rows
Jul 12, 2009what i want to do is have a formula set up that works out who has the best position and then re order the number rows to put the player in position 1 at the top. so just moving cells c-n
View 6 Replies
ADVERTISEMENT
Ordering Worksheets By Name
Jun 1, 2009I have about 45 worksheets in one file. Then all have been named. Is there any quick way to order them? I would prefer not to move each one.
View 2 Replies View RelatedOrdering Of Worksheets
Sep 4, 2009I need to ensure that a worksheet is ordered after another in a workbook. The macro that this code is in opens a selected file and carries out various operatins on it, so although I can do this fine when the worksheet needs to be created, there are scenarios where it already exists and I simply need to change the order. The sheet that must come in position 1 does not have a common name and so I cannot reference it via it's name in the code. The other sheet is named when it is created so it doesn't necesarilly have to be in position 2, it's just that the other one needs to be in position 1.
View 7 Replies View RelatedRanking, Ordering
Jan 29, 2010A number of columns (B to U) contain names, details and scores of players. The A column contains the ranking, e.g. 1 to 100.
If a player (row) is deleted, that ranking number is also gone. Is there a way to make the A column always maintain the integrity and completeness of the numbering, e.g. if rank (row) 16 is deleted, the range of B17:U100 moves one row up and the former 17 is now 16? And if a new row is inserted, the ranking numbers after the insertion move up one row and a new number is added at the end?
2. There are 6 columns of scores, P to U. But out of these 6 scores, only the best 4 count for the ranking. The two worst (highest) scores are dropped. Is there a way to automate the process by selecting only the 4 best (lowest) numbers to be summed into the Total column (C), which in turn determines the rankings in the A column?*
And then can the whole range B2:U100 automatically be sorted according to the ranking in column (A)?
*It is possible that there are 3 or 4 bad scores, all with the same value. In that case only 2 could be discarded, and 1 or 2 would be summed into the ranking cell.
Lookup Without Ordering
Mar 9, 2008How do you do a lookup without having to have a list in ascending order?
RE-ORDERING A Table
May 1, 2008i have a 5 by 10 table (5 columns 10 rows)
values only equal 1 or blank
i want to re-order this table in another identical table so that no row will have more than one value (each row will have a maximum of one "1")
currently, the table looks something like this:
blank blank blank 1 1
blank blank blank blank 1
blank blank blank blank 1
blank blank blank blank blank
blank blank blank blank blank
what i would like the idential table to show is:
blank blank blank 1 blank
blank blank blank blank 1
blank blank blank blank 1
blank blank blank blank 1
blank blank blank blank blank
Ordering A Column By Date
May 30, 2013I have 320 rows of data, of which the date is in the first column. I need the data sorted into date order, ie. 04.05.12-->30.04.13 and all the dates in-between (note these are British laid out dates). I am aware, and have already done Format Cells --> Date --> 14.03.01, as this is how my dates are laid out.
I've tried sorting this column, ascending, descending etc etc etc, obviously it needs to be 'expanded' to ensure that the rest of the data in the row follows it to its new position. No joy. It only ever sorts the dates by the day ie. 02.04.13, 04.12.12, 06.06.12. Doing it by the day and not the month and the year also.
I don't want to order 320 data rows myself!
Ordering If, Else, And ElseIf Statements In VBA
Jun 6, 2009I have an enquiry where I'm trying to order error messages which occurs in if, ElseIf and Else Statements. The code I have works. However, I would like the error messages to be checked in a particular order. I tried rearranging the conditional statements but had no success. Here is my
View 5 Replies View RelatedOrdering Of Shortest Price
Sep 28, 2008I want to have them in order of shortest price (favourite) first with the relevant horse's name in the adjacent column. I have just discovered vlookup which seemed perfect - until I discovered that when there are two or more identical prices it only returns the 1st horses name.
Is there any way I can use vlookup to do this (with more than one identical value)
Combining Strings Of Numbers And Ordering Them
Jan 26, 2007I am trying to come up with a formula which would combine two groups of numbers, put them in numberial order and remove duplicate numbers:
3 6 10 22
1 3 5 9 10 13 19
The above two groups of numbers are in separate cells in two different rows.
the result would also be in a different row: 1 3 5 6 9 10 13 19 22
Production Schedule And Supply Ordering?
Jun 7, 2013I need to make a spreadsheet on excel which shows the production schedule of a product over 4 days.
Then I need to make a supply ordering sheet which shows how much supplies are needed to do the above task and how much each item in the supply list will cost and when the items would need to be ordered.
Setting Up Stock Ordering System Using Excel
Jul 15, 2013setting up a stock ordering system in Excel. I have been sent a spreadsheet with about 400 items I've ordered before and about 15 columns of descriptions which include the name, category of item, manufacturer, cost, number etc.
I would like to set up a simple Excel spreadsheet which staff can use when they want to order some stock, which will automatically fill in the adjacent cells with the product category and unit cost, once the name has been typed into the first cell. Once I add the SUM formula I can therefore have an immediate total of how much each staff member is spending on stock that week, without having to look at the invoice I get back from the supplier.
I know Excel has a predictive text style feature (autocomplete?) but I don't know how to get it to automatically fill several cells in a row with data that is linked to the first cell.
Ordering List Whilst Ignoring Zeros
Oct 21, 2013I would like to reorder a list whilst ignoring any 0 values. I've attached (I hope correctly!) a spreadsheet of what I mean. It's pretty simple, but I've been banging my head over it for a while now!
Sample.xlsx
VBA - Checking For Blank Cells And Ordering Numbers
Feb 9, 2007I have the following macro:-
ActiveSheet.Select
ActiveSheet.Copy
Columns("A:D").EntireColumn.AutoFit
Range("A2:B500").Select
Selection.Sort Key1:=Range("B2:B500"), order1:=xlAscending, Key2:=Range("A6:A250"), order2:=xlAscending
Within this I would like to add a couple of features which check:-
1) If there is a number in column A - there should be one in column B
2) The numbers in column B are sequential i.e. 1, 2, 3 etc without any gaps in the sequence
Re-ordering Columns From Customer Supplied File
Feb 14, 20101 - We receive an excel file from our customer (approx 20 different customers in total)
2 - I have an excel template we have to use, which will import into our MIS software. This excel template must remain the same or it wont import into our system. ie (Columns must be in this particular order)
3 - Our customer sends their own spreadsheets in their own formats ie, column in a different order to our excel template.
4 - I need to know if there is a quick way to remap customer columns into my excel template
5 - Im looking for a little application that will look at the customer spreadsheet and our template in the same window and let me link which fields need to map where in my template. When I have completed I can save what ive done and run when needed for this customer.
Dependant List - Organize The Ordering Process From Wholesalers?
Dec 21, 2013I have a list on flower names in column A , and the colors in Column B. For sorting purposes I have duplicates in Column A. I am creating an easier way for coworkers to organize the ordering process from wholesalers. On the order sheet It will have the dropdown that lets them choose the flower (ultimately I hope to make this searchable,) Once the flower is selected the next column will allow them to choose from the color available. Attached Is the sheet with my work so far.
View 8 Replies View RelatedSheet Preparation By Ordering And Swapping Cells Vba Macro
Jun 5, 2007in 1 workbook i have 2 sheets (sheet1 and sheet2) with same format of data that I need to compare and compile in sheet3 by a primary key column.
example:
sheet 1 & 2 data format:
|Atr1|Key|Atr2|SubAtr1_1|SubKey1|SubAtr1_2|SubAtr2_1|SubKey2|SubAtr2_2|Atr3|
..................... ......................................../......................................../
......................................Set1.....................................Set2
To be more specific I can compare this with an electrical wiring table, where:
Key is the wire number
Atr1, Atr2, Atr3 are general atributes of the wire number
Set1 are the atributes of the first end of the wire, called "from":
SubKey1 is the "from" device and its subatributes SubAtr1_1 & SubAtr1_2
Similar for the other end of the wire is Set2.
This means that Set1 and Set 2 have similar format & type of data.
I have found on your site an example of macro that is doing the comparision between the 2 sheets of data but I encountered a problem...sometimes on sheet2 Set1 and Set2 are reversed and are highlighted as a difference but I don't want this.
Please help me with macro that would create a rearranged copy of sheet 2 respecting the following conditions:
1. if Key from sheet1 cannot be found on sheet2 then copy entire row on sheet3.
2. if Key from sheet2 cannot be found on sheet1 then copy entire row on sheet3.
3. If Key from sheet1 = Key from sheet2
If SubKey1 from sheet1 = SubKey2 from sheet2
& SubKey2 from sheet1 = SubKey1 from sheet2
Then reverse Set1 with Set2 by swapping cells
and copy entire row (with Set1 and Set2 reversed)to sheet3.
All data on sheet 3 should be sorted by Key.
Re-ordering Some Columns (groups Of Columns)
Nov 22, 2008I must put in descendent order some columns, but the thing is a bit more complicated...
As my english is not very good i am gonna explain it with a simple example:
----------------------------------
1 4 2 5 rabit fox dog cat
2 6 1 3 bird fis wolf mouse
----------------------------------------
Ok, i must order the numbers in a ascendent way, but reordering one number means also reordering its correspondient name (the name of the animals at its right).
So, again, with an example you will see it better:
Ordering the first row it must appear like this:
----------------------------------------------
1 2 4 5 rabit dog fox cat
----------------------------------------------
I didnt know if i had to post it here or in other subforum and either if it can be done with excel.
Paste Rows Without Overwriting Other Rows (automatically Shift Other Rows Down)
Jan 3, 2010The number of rows you are pasting and then you can select that same number of existing rows and use "insert". This is what I'm trying to achieve:
(before paste)
A
B
C
(after pasting unknown number of rows)
1
2
...
n
A
B
C
Is there really no built-in way to do this?
Identify Duplicate Rows And Copy / Paste First Cell To All Cells Of Equal Rows
Apr 14, 2014I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
Excel 2010 :: Delete Filtered Rows Without Deleting The Hidden Rows?
Sep 25, 2012How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View RelatedExcel 2010 :: Extend Rows Based On The Number Of Rows In Another Sheet
Jun 16, 2014calculate the number of full rows in one data base located on one sheet X to determine how many rows the macro needs to extend on sheet B (sheet B is made only of formulas for data interpretation in sheet A.
View 14 Replies View RelatedClear Rows Vs. Deleting Rows To Avoid #REF! Formula Error - Macro
Jun 9, 2009I have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
Maro, Insert Rows Where Rows Determined By Number Of Carriage Returns
Feb 17, 2010The best way to explain my problem is to look at the table below:
How it looks now: ApplePrice 1
Price 2
Price 3FruitDeliciousPearStore 1
Store 2FruitVery DeliciousHow I want it to look:ApplePrice 1FruitDeliciousApplePrice 2FruitDeliciousApplePrice 3FruitDeliciousPearStore 1FruitVery DeliciousPearStore 2FruitVery Delicious
Excel 2013 :: Averaging Rows Of Data Within Larger Blocks Of Datasets - Skipping Rows
Jul 16, 2014I am trying to average different rows and columns within a larger block data set in a series. This data is from a 96-well absorbance microplate reader experiment. I only mention this to describe the raw data output I am dealing with.
Each set of data is in a 12 x 8 block with the next block below it with one blank row between. So I have a block of data contained between A1->L1->L8. The next block is contained between A10->L10->L17. This continues for a total of 28 blocks.
I want to take averages from rows or columns from each block and autofill them into a single column. So for example I'll need =Average(A1-C1) with =Average(A10-C10) below it and so on and so forth. My problem is that if I try to autofill from this already started column the third row will take the average of A2-C2 instead of A19-C19.
Is there a formula/script for me to skip the correct number of rows to the next data block?
I have attached my spreadsheet to this thread. I am using Excel 2013
FeS_Kinetics.xlsx
Error In Filtering Table - Additional Rows Shown / Rows Hidden When Filter Removed
Mar 4, 2014I have an excel file with a table in it. It contains 2051 records (attached). This is just a sample, the original file has around 30,000 rows.
When I start using filters, I run into problems:
Step 1: Filter by Unit, condition (e.g.) Unit_23
Excel shows in the status bar the following message: 437 of 2050 records found.
Step 2: If I scroll to the bottom of the table, the row numbers are colored in blue (normal for a filtered list) however the last row is not colored and it actually should not be shown since its unit is not what I filtered for (its unit is Unit_25)
Step 3: Clear the filter of Unit
Step 4: Sometimes (depending on what I filter for), one or more of the bottom rows are hidden!!!
Attachment 301726
Macro To Copy Rows Based On Moving Date And Paste Rows Into Identical Sheet
Jan 28, 2014I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
Macro To Split Rows Into Groups Of 5 And Insert 3 Blank Rows In Between
Feb 9, 2013I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
2 Rows Of Data For Individuals In A Population - Attempting To Average The Rows?
Apr 30, 2014I am an undergraduate biology major working on a geometric morphometrics project. It is focusing on wing asymmetry, so I have data for the left and the right wings for a sample population of 30 individuals. The data from the software is exported as a spreadsheet with two rows of data for each individual, since each wing was calculated separately, and my mentor has asked me to average the data for subsequent analyses in another program.
I'd like to do this easily with an Excel formula, but when I try to do the averages I'm having a little trouble getting the formula to carry on correctly. I need it to average, say, E2:E3 then the next cell average E4:E5, but instead the only thing I can get it to do is average E2:E3 then the next cell do E3:E4. Which obviously doesn't work for me, since E3:E4 is data from two different individuals.
Is there a way I can do this for my data? One of my spreadsheets is a 60x32 matrix of landmark coordinates, so I'd really rather not try to do all the cells individually.
Pulling Rows From Other Sheet - Skipping Over Rows If Column Is Blank
Jan 17, 2014I am working in the attached spreadsheet. For anyone who does not wish to open the link, let's say these sheets are titled 'Sheet1' and 'Sheet2'.
Sheet2 looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
[Code]....
Now, how may I pull this data into a summary sheet (Sheet1) that skips over any instances where column A ("Year") is blank so it looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
2013 2 Pat
2013 5 Bob
[Code]...
Note: All columns are the EXACT same across each sheet(including Sheet1, Sheet2, Sheet3), if that extra piece of information works.
PS It is fine if, in order for a formula to work, I need to copy and paste the formula for the length of rows per each Sheet to consolidate.
EDIT:
So, in my industry, any summary-level data (shown on Sheet1) must have a linked reference to a particular sheet (Sheet2, Sheet3, etc.) so the user knows where the raw data came from. This is to ensure increased accuracy of data and minimize human error (like, if for example, I accidentally didn't copy and paste all the rows correctly).
I have uploaded the actual sheet to show what the data actually look like. I am trying to pull in 2013 data into my "Summary Page" and would like to have all the data linked to the '2013' sheet but skip any blank rows.
Here is my failed formula:
=INDEX('2013'!F$3:F$338,SMALL(IF('2013'!$E$3:$E$338<>"",ROW('2013'!$E$2:$E$338)-ROW('2013'!$E$2:$E$338)+1,ROWS(B$1:B1)),""))