I'm trying to write a macro that will find a value beginning "ber" and paste it across to a different column. I have had a go at it but I keep getting the offset flagged up.
It needs to move 15 columns across and 7 rows down if that is of any importance.
I need to add something to the code below to have my first row of data entered into cell "Q8". As it is now the data is starting on row Q9 instead of Q8, but the rest of it is filling in correctly.
[Code] .....
Let's say I have a long macro and I want to test some code a ways down in the macro, but I don't want to have to run through all the code to get there, because I already have my Excel spreadsheet set up at the point I need to check and I just want to start checking the code a ways into the procedure.
Short of commenting out all the code above where I want to start, is there another easier way to do this?
I use the following code to copy entire rows from one sheet to another and this is pretty standard.
VB : rng.EntireRow.Copy Sheets("Sheet2").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Assuming that Sheet2 is blank, this of course copies the rows to Sheet2 starting at Cell A2 and down column A. I would like to modify the code so that I can specify at which row the copy should start. For example, I might want to start the copy at A1 instead of A2, or at A10 instead of A2.
I have a spreadsheet where I track resources needed on a project. Each resource that is selected in the resource column has a corresponding % avg and an average number of months where the resource is used. % Avg and # of Months are found in a different worksheet.
What I am looking to do is, for example: if resource A will be on the project starting in May 2015 and assigned at 30% for 7 months, I want to populate 30% starting in the colunm labeled May 2015 and copy the 30% so that a total of 7 months are populated. Also, if any of the values change (i.e: the Resource Name or the Start Month) I want to erase all the percentages that were entered in the row. How can I achieve that with a VBA code? I have formulas that retrieve the # of Months and the % Avg already.
These are the columns that I have in my spreadsheet:
Resource NameStart MonthJan-15Feb-15Mar-15Apr-15May-15Jun-15Jul-15Aug-15Sep-15
I have a worksheet that will have tabs added as time goes by and a macro within the workbook currently selects all of the sheets and copies and pastes formulas within all of the sheets simultaneously. Right now, if a tab is added, the macro needs to be updated to select that specific tab name as well.
I would like to simply have the macro select all of the sheets starting with "IL" until the sheet before "reference", or all sheets except the first 3 and the last 2 if that is easier. Any ideas? And thank you for your help, you people really amaze me sometimes!
I have column A and B , in Column A cells i have words that I need to count the number of specific letters from them.
like :
A2= Apples
I need B2 to show the number of letter "A" in A2's text.
I have an excel database that contains a code to identify specific people.
NAME ADDRESS PHONE CODE
Jones 3 Quay St, PN 063586954 JU79N4
White 24 Dyk St, PN 063547786 9GVJ64
Smith 9 Random St, PN 063512698 4LN867
Butt 89 Yeah Pl, PN 063569986 D920HK
Handle 69 James Ct, PN 06 3549687 ZK26S84
If I wanted to filter the list so I only had codes that had Z, N, H in it. How do I do that??
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I want to build a Macro that basically moves right of the cell I am in a few cells and then copies and pastes this info into another worksheet and then prints this worksheet.
However, I can't seem to build a macro that will run from whatever cell I am in.
Everytime and try it just goes from the cell I was in when I recorded the macro.
For instance, if i build the Macro in row 1, but then want to run the marco in row 23, it keeps going back to row 1 whenever I press play.
I know there must be a way of telling it "move right 5 cells from whatever cell is highlighted when the Macro is run...etc"
I would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.
View 7 Replies View RelatedI have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
View 2 Replies View RelatedI have a macro that I run repeatedly in a certain type of spreadsheet that does an export on a selection, pulls up a "Save As" message box and saves as a text file. There are 9 sheets in the workbook that contain the same data analysis for a set of samples, the only difference between them being the number of data (e.g. some may have 1500, 1400, 1600, etc.). I only select three columns of data to export (I6:K????) that contain counts (1,2,3,....), x-coordinates and y-coordinates. The counts column (I) uses a formula that only counts if there is an x-coordinate next to it (Col J).
[Code].....
Generally, what I do to make quick work out of selecting the variable ranges is to select Sheets 03-11 (the first nine sheets) and select K6:I6 (starting w/ K6). Then, on each individual sheet, I do CTRL+SHIFT+DOWN to select all the relevant data (if I started my selection with I6, then it would select all cells that contained formulas which may or may not have x,y-coordinates adjacent to them). Once the data is selected (I6:K????), I run the export macro and save the data as text. I would like a macro that can automate the selection for each Sheet 03-11, excluding Sheets "all", "data" and "summary", and run the export macro, first prompting me for a file location and a file prefix. When the text file is saved, it uses the file prefix and Worksheet name to build the filename, i.e. "pathprefix_wkshtname".
I've attached an example workbook : 20120511_Au-cit_pH5_test.xlsx
I have a spreadsheet that will monitor payment schedules, in which both payment frequency and the payment start date are inputted by the user.
As such, to make filling out the column(s) fool-proof, I want to grey out cells in which data should not be entered.
For example, if the payment frequency is every 6th day, and the payments are to begin on day 0, then days 0, 6, 12 (etc) should be left white, whereas the remainder of the cells should be shaded.
I can achieve this using multiple conditional formatting rules in excel2007 with iterations of formulae of the type:
I have a large document with a lot of names listed. I want to make up new sheets for each person listed. Is there a formula that I can enter that will move the entire row based on the person's name? See attached.
View 3 Replies View RelatedCurrently i hav list of info that is long like this.
A 1
B 2
C 3
D 4
E 5
F 6
G 7
H 8
I 9
J 10
How to move row to column example below. Because i want the data to be printed on an a4 paper which can fit around 3 row to save space . If i manually copy paste page by page it is too much.
A 1 D 4 G 7
B 2 E 5 H 8
C 3 F 6 I 9
===
Currently i have macro code which roughly does this.
A 1 B2
C3 D4
E5 F6
G7 H8
I9 J10
Sub test()
Dim rng As Range, m As Integer, c As Range
Columns("c:E").Delete
m = 2
Set rng = Range(Range("a1"), Range("a1").End(xlDown))
Set c = Range("a1")
Do While c <> ""
'MsgBox c.Address
Range(c, c.Offset(m - 1, 0)).Copy
Cells(Rows.Count, "c").End(xlUp).Offset(1, 0).PasteSpecial Transpose:=True
Set c = c.Offset(m, 0)
Loop
End Sub
I am working on the attached price proposal and need my user to be able to enter a number into column E indicating that that row should be printed on the quote. The 'quote' can be new sheet or another area of current sheet that is formatted to look like letterhead.
View 4 Replies View Relatedis there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
View 9 Replies View RelatedI work with a sheet with active columns B thru I, which get daily numeric entries. The problem is that I have to enter data in columns H & I first, then go back to B thru G. how to force the cursor to jump to column B when I tab out of I into J?
View 5 Replies View RelatedWhat I want to know: Is is possible to have information from one spreadsheet move specific data to another spreadsheet in the same workbook?
for example: I have hundreds of listings of tool measurements.
Date Tool type Measurements
What I want to do is have all the different types of tools and the information from the above line seperated into other spreadsheets. I do not want to sort this information and manually move it I want a formula that will move each applicable tool into that sub sheet. I have tried to use if statements but find that it creates subsheets with the correct tool types but has the spaces in between the parts. how do I eliminate the spaces?
now I thought about recording the macro, but it's an offset and if you click the chart, then it'll mvoe somewhere else even though the charts are always placed in the middle when generated. So I think I need to place it in a specific range. I want to use XY coordinates or range labels or something to that effect but would like something to this affect:
With Charts.Add
.ChartWizard source:=Worksheets("sheet1").Range("a1:a20"), _
gallery:=xlLine, title:="February Data"
End With
I got that in VBA help, but I'm not using Chart wizard, my code just creates the chart from the data on its own with specific chart type. So anyway, how would I make it put each of my five charts for the 25 people in the same place for every person. Performance Errors etc etc etc all will go in the right place everytime, regardless if you start with the page scrolled. I should do range right, but how do I change this macro to do it without chart wizard...just a chart that's already created and named. QUESTION: How do I place charts that are created from a data source onto a specific area of one worksheet, and those charts are always in the same place regardless of the person'a name.
How to do what I am about to ask takes time and time causing brain overloading. I have made screenshots but I can't upload them. I get red exclamation point with images sizing ~55KB
View 9 Replies View RelatedI need a macro to move specific information.
I get an excel sheet with W/C Employer: (whatever) entered below the patient it belongs to in column E. This information needs to move into its own column (H) in line with the above patient information so I can use it in a mail merge to word.
The same thing needs to happen with WC injury date listed in column G. It moves to column I. Then delete the row it was moved from so I don't have an empty row.
Sheet 1 is what I get. Sheet 2 is what I need to end up with.
I am trying to have rows moved from (Schedule) to (Complete) in the attached workbook. The criteria to have the row moved would be the user-selected "Status" list changing to "COMPLETE" in Column G.
I would like to have the row cut and deleted from Sheet4 (Schedule) once "COMPLETE" is selected from the list in Column G with rows below moving up. The row would then be inserted into Sheet2 (Complete) at the top of the list (Row 7) and rows would move down below the new entry. I would also like to have the formatting remain uniform (every other row fill)
I'm working on a function that will sum a row of cells containing letters and numbers. I am currently using :
=SUMPRODUCT((0&SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(B5:S5,"T",""),"TP",""),"TPE",""),"P",""))+0) as my base.
Right now the formula will work with T, TP, and P; however as soon as I type TPE I get #value.
Either way you get the point of what I am trying to do, however my cells can contain any one of the following combinations:
T,TP,TPE
P,PE,
E
I have a spreadsheet filled with either "B" or "S" in cells. Its 500 rows long (starts from row 2) and its 839 columns wide, but the cells begin to be filled with B and S after column 11. I would like to count all B's and all S's in each column, and add them....it works for B;s as it counts them up and spits the result in row 503, just as it is supposed to. But the counter for S, does not work.
View 4 Replies View RelatedWhy does this work:
Code:
ActiveSheet.PageSetup.PrintArea = "$A$1:$J$10"
but not this?
Code:
ActiveSheet.PageSetup.PrintArea = Range(Cells(1, 1), Cells(10, 10))
i have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
I have words in cell range (i.e. A1:A1000) and I want them to became upper letters.
Excel forum to EXCEL FORUM
I have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.