Column A has names and Column B has points in descending order for the names in A. Columns C & D will have names and points, re-sorted for points descending order.
Column E will report if there has been a change in the ranking of the name and by how much. Column F will report the point difference for the names, regardless of order. I have attached a generic example, without any attempts at formulas. I am working with over 600 names.
A formula for ranking two sets of columns and four rows. I have column A with the names Sid, Dave, Marty, Steve. Column B has -4, 5, 4, 2 (thats actually the point difference). Column C has 1, 2, 2, 1 (thats actually winning games). I want to rank them in order from highest to lowest starting with column C (winning games), then because there is obviously a draw (or as some might call it a tie) between Dave and Marty (2 each) and another draw between Sid and Steve (1 each), I would like to rank them upon column B (the points difference) after attempting to rank them for games won. So I anticipate an extra column with the following from top to bottom - 4, 1, 2, 3.
View 9 Replies View RelatedI have a pivot table as shown below which is pretty straight forward however I am trying to create a macro that will automatically change the point name to match the point name in column E then copy that resulting dispaly to another sheet then pick the next point name in line and do the same thing and repeat for 50 rows, so my end result will be 50 pivot tables ready for printing. I can do this manually but I am trying to make it automatic...BTW the point names in column E change everyday but the pivot table supports the name changes.
Option Explicit
Sub PointName()
Dim Ws As Worksheet
Dim Rng As Range, Cel As Range
Set Ws = ActiveSheet
Set Rng = Range(Cells(2, 7), Cells(Rows.Count, 7).End(xlUp))
For Each Cel In Rng
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Ws.Columns("A:B").Copy
Sheets.Add
With ActiveSheet
.Paste
.Name = Trim(Cel)
.Range("A1").Select
End With
Next
Ws.Activate
End Sub
I turned it off for a while and when I turned it back on I am getting an error
Unable to set the _Default property of the PivotItem class
Debugger is highlighting
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
I have a column of unsortable percentage data. I need to allocate a point in a neighbouring column to all those percentages up to a cutoff total percentage.
Not very clear because I can't put it into words. Essentially, as the column is not sortable, I need to identify the highest percentages listed in the column down to a cutoff. Makes more sense if you observe the simple Excel data.
I am trying to develop a point system to rank things. For eg: in the below chart, I have the follow criteria.
In a particular Cell A1, i enter a numerical value like 1.5. Then Cell A2 (Points) should show that the Points earned is 80.
If MTTR is 1.00, then the Points received by the candidate is 100. Similarly if 3.5 or higher is there, then the points should be 0
MTTRPoints
1.00100
1.2590
1.5080
1.7570
2.0060
2.2550
2.5040
2.7530
3.0020
3.2510
3.500
This is only one type of calculation. For other tables, i will have to change the criteria.
Is there any way i can set the limits for A2 as 0 to 100 and based on what appears in A1, the cell A2 should change automatically
I"m looking for a formula that searches for sales from a sheet (that already has the sales ranked) and populates that into another sheet. But the 3 cells above/below would have the difference in sales.
Rank
1.
2.
3. Rank3-MySales
4. Rank4-MySales
5. Rank5-MySales
6. MySales
7. Rank7-MySales
8. Rank8-MySales
9. Rank9-MySales
10.
So something like this:
Rank
1.
2.
3. 3500
4. 2700
5. 950
6. $5000
7. -1200
8. -1550
9. -2400
10.
I've created a button that, when clicked, will give a time and date stamp. The issue I'm having is that when I click the button, it displays the information in the active cell. I've searched for an answer, but keep coming up blank. Here is my macro:
View 5 Replies View RelatedI have two sets of data. The first set is my top 100 customers from last year in column B and their total sales in column C, their rank is in column A (sorted from highest sales to lowest). Then I have the same data except it's this years data in columns E, F and G. In column H, I want to display the change in rank from last year to this year.
The only way I can think of to do this is by putting a lot of if then statements that compare the cells and return a number which is then added up to give the rank change. We're talking about 200 if/then statements that have to be created individually.
Using excel 2007. In a A table of marks obtained by a student. I want to get the content of the cell be displayed in a bigger font and in a particular color when i point to it. When I point to a cell content the display should be in a color of my choice say green and the font be greater than 20 pixels.
View 1 Replies View RelatedI have a Pivot Table with fields for months and weeks. I also have a "Show Values as % Difference Field" that shows monthly or weekly % change. When I collapse the fields so that it goes from weekly to monthly (or vice versa), I have to manually change each Show Values As % Difference column. Is there a way to do this automatically or quickly?
View 1 Replies View RelatedIs it possible to compare two columns side by side to highlight/change color of difference between the two cells
I need to compare and show the changes to the record from previous version and generate a report which will highlight the changes (Rather than just saying that record has changed It should tell what has changed)
For example if the
Column 1 (Previous Version) :The structure contains Wire, Bolt, Stmaps etc
Column 2 (Current Version) : The structure contains Wire, Bolt, Stamps etc
Data Changed: YES
In report is should show two columns side by side and in Column 2 it should highlight "Stamps"
I'm trying to Rank a list and than re-rank the list while excluding certain (or by Criteria) items
Vendor Co
Cost Fee
Rank
Vertox
500
4
BV
1520
3
[code].....
What I am trying to do is give the rank in column D based on the values in columns B and C. Some of the values in column B will have then same rank, and as such I want to add further criteria on which to rank them. I would first like to rank the values in column B and then rank the values in column C, which should give the rank in column D. For example Dog and Frog have the same value of 400 from the Non UK column. Therefore, rather than having these as both rank 1, I want them to be ranks 1 and 2, so want to add another criteria (UK). As Dog is greater than Frog in the UK (i.e. 10>7), I would like to rank Dog as 1 and Frog as 2. Goat will be ranked as 3 because it had the thrid highest value in the Non UK.
ABCD
1Non UKUKRank
2Cat20055
3Dog400101
4Eel200114
5Frog40072
6Goat30023
I want to pay salespeople a bonus when they sell things at a higher Gross Profit. There is a minimum markup. I want to say for every additional point above the floor (F) well pay (B*C). There is also the actual attainment filed (A). For this example lets say the floor (F) is 22% and the actual attainment is 26%.
Illustrations:
.22 = 0(B*C)
.23 = 1(B*C)
.24 = 2(B*C)
A = .26
F= .22
What I want is:
if A >= F THEN for EACH POINT above the floor add 1*(B*C)
Its actually buried in a larger IF(AND function and I need to be able to drag the function down a long column and have it scale with volume sold. But its just this bit of logic I'm hung up on.
Does anyone know if Mappoint 2006 has automation support? I know that 2004 does. I am wanting to use the automation from excel's VBA.
View 6 Replies View RelatedI am stumped on this one. I a spreadsheet with 5 columns (Quarters, Months, Level or Rank, Name, Sales). I need to have a formula to pull in the new Level 1 (rank) after Q4 sales are summed up across months for each name. See the attachment for detail.
View 4 Replies View RelatedPicture 2 rows and 4 columns.
The top row is just 0, 1, 2, 3
The bottom row is something like: 850, 790, 200, 250
Here's the problem: I want to find the midpoint of the data set in row 2, based on the values in row 1. So, the sum of the data in row 2 in this example is 2090, meaning the midpoint is 1045.
If we were traversing along the top row as a line, we'd find that midpoint somewhere in the 0.3 range... but how do we get that value?
is there any way to use the right function to return any data to the right of the decimal point?
eg 117.22 would be .22
108.1225 would be .1225
102.358 would be .358 etc
1.jpg2.jpg
I am trying to create a database for part stock but with only one entry point that is in image 1 you would select the machine and part from drop down lists and hit add. It would then lookup the corresponding machine and part and subtract 1 from the current stock database.
I’m using this code to run consecutive programs, which works really well, apart from one little glitch.
View 3 Replies View RelatedSee here:
http://www6.uniovi.es/~antonio/uned/...-754hex32.html
This site allows me to enter a 32-bit Hexadecimal Representation and get Decimal Floating-Point result.
For instance, 4224A012 gives me 41.2.
Is there a UDF available to do this inside of Excel?
I am trying to split the points given to our anglers. here is my formula for assigning the points (column I) based on the place (columnH):
=VLOOKUP(H5,'Supporting columns'!A2:B33,2,FALSE). I tried adding +IF(H5=H5:H33,-1) but this affected all other rankings. if 2 anglers tie for a place, the points for that place are awarded -1.
Is there a way to delete all rows down a sheet until Cell A contains ""
or if the criteria "" would work?
i only want to keep the data below that point.
i will have to do it 11 times for different files
If I am trying to calculate the breakeven moment from a project that has an initial cost and a series of quarterly returns. This is easy to do visually but I cannot figure out how to arrive at the breakeven point from a data set such as this.
e.g. 50,000 spent at time 0
5,000 received in q1
10,000 received in q2
10,000 received in q3
10,000 received in q4
10,000 received in q5
10,000 received in q6
In which month will I break even?
I'd like to point a cell to a subtotal on another sheet but that sheet will periodically have the subtotals removed, more data added, then sorted and subtotalled again. Is there a way to have my other cell find the subtotal that matches a certain criterion (in this case, cost center)?
View 9 Replies View Relatedthe rate and inventory management system my hotel uses rounds up to the next .95 currently. Most rates are based upon a 'Rack Rate' in the form of a discount percentage. So, if the Rack Rate is $129.95 and the AAA discount is 20%, the resulting $103.96 rate is rounded up to $104.95. I'm trying to fix my spreadsheet to account for the various rates and discount percentages of several different types of discounts.
I've tried a couple rounding methods:
=ROUNDUP(B$30*(1-B32),0)+0.95 which returns the correct value only when the value to the right of the decimal point is .96-.99
=ROUNDDOWN(B$30*(1-B32),0)+0.95 which returns the correct value only when the value to the right of the decimal point is .00-.95
=CEILING((B$30*(1-B32)),0.95) which returns some odd bits, sich as .85 and .50
So, is there a way to get Excel to shift the rounding base point from zero to .95? Or some other way to accomplish this?
Would like to do the following for our school,
In cell A1 there is a number, for instance: 12.12345
Based on that number, the 3rd number after the decimal is important.
If the 3rd number after the decimal is “x” then the contents returned in b2 is a text value ( like high school ) .........
I have a column of data and I want to average the figures from a certain point onwards.
I have the starting point value in a cell which is used as the lookup value to find the matching position in the list using the Match(lookup value, array) formula.
How do I then use that formula as the row number in a cell reference for the averageing formula?
eg Average(C(match(B1,C4:C100)):C100) - what is the correct syntax?
I am trying to position a userform to my own coordinates, but I don't see how to do this in any of the form properties. I do realize that there is a startUpPosition property but none of these positions work for me.
View 4 Replies View RelatedIf I check the box labeled catagory name on the intial creation or within chart options on the right click menu each data point gets labeled with the name of the catagory.
I would like to label a significant event at one of these data points does anyone know how to do this? If this isn't a built in feature does anyone have a work around that would look good?